Used Force Measuring Bearings for sale (15,010)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Podpfx Aozcqy Eebuogu Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!!

Condition: ready for operation (used), Mahr Marshaft MAN 400 manual shaft measuring station, shaft measuring machine, measuring machine Mahr Marshaft MAN 400: Measuring range, length: 400 mm Year of manufacture: 2011 Pgjdozmr D Eepfx Abueu MarCheck: Mahr UTS 90-M: Mahr LTS 100: Mahr DMS 120 Year of manufacture: 2014 Year of manufacture: 2016 Year of manufacture: 2011 Year of manufacture: 2011 You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, Pgedpfxezy H U Sj Abuju We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. In addition, there are a number of accessories included. You can see these in the images below. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2013, machine/vehicle number: 20130207F, with measuring table, dimensions: 6000 x 3000 mm, table plate weight: approx. 13,500 kg, measuring probe, manufacturer: RENISHAW. Pgedpe Af Nivofx Abusu

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System Pgodpfxexzgtds Abusu The unit is in full working condition and is ready for immediate release The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Condition: used, Year of construction: 2025, OPTICAL MEASURING MICROSCOPE SINOWON iMS-3020C Optical measuring microscope with image processing (2.5D), manufactured in , a used machine in excellent condition for precise optical measuring tasks. Measuring range 300 x 200 x 200 mm, operation via a PC workstation with measuring software. TECHNICAL DATA - Manufacturer / Model: Sinowon iMS-3020C - Year of manufacture: - Design: optical measuring system with camera (2.5D image processing) - Measuring range X/Y/Z: 300 x 200 x 200 mm - Control: PC-based (image processing) - Software: Measuring software on PC workstation SCOPE OF DELIVERY Included in the scope of delivery: - Machine with camera and lighting unit - PC workstation with monitor and measuring software Not included: - Commissioning - Training / Instruction Pgedo Agckvjpfx Abueu - Transport CONDITION Used machine, year of manufacture . The machine was photographed during operation, and the measuring software was running. Known defects: none documented. Inspection possible by arrangement. PROCESSING Inspection possible by arrangement at the Leonberg location. We will handle dismantling and loading; transport available upon request. ABOUT KMT Kneissl Messtechnik is a specialist in industrial measuring technology – used machines with personal consultation, DAkkS calibration service, and optional instruction and installation.

Condition: good (used), Year of construction: 2024, Theodolite DT-405, Video Measurement System VM-18, Angle Measurement Unit, Camera System used, from business liquidation Original purchase: 2024 Information and data according to the manufacturer: with active target panel Range up to 130m Video display of H and V angles versatile applications lockable H and V axes carrying handle collimating telescope zoom camera LED target panel motorized focusing unit Note: Operation only possible via monitor MF-03 Psdpfx As Ab R Upsbusgu Charging cable for Geo-222X target panels available Operating manual Transport case without carrying strap without adjustment tool without rain cover We recommend an inspection Information without guarantee Information, details, and technical data from the manufacturer To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are Monday to Friday from 8:30 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired after prior appointment. Subject to prior sale, changes, errors and misprints.

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine from Zett Mess Pgsdpfx Abe Aa Ikfouju Platen and 2 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Platen dimensions: 6,000 x 3,100 mm Measuring range: X/Y/Z 6 / 3,100 / 2,500 mm Service available from the successor company, Zett Mess Includes all accessories Price: EUR 9,500.00 plus VAT, ex works

Condition: used, Steinheil KONTUR 408-2/D optoelectronic contour and wave measurement system High-precision optoelectronic contour and wave measurement system, Steinheil KONTUR 408-2/D, with high-quality Jenoptik optics. Pedozz Hwvjpfx Abusgu The system is used for non-contact, high-precision, and fast measurement of rotationally symmetrical components (e.g., shafts, camshafts, turned parts). The device scans the measurement object non-contact using the shadow image principle. Rotational measurements are recorded with up to 1440 measurement points on the circumference per measuring point. The evaluation and quality control are performed directly via an integrated SPC software (Statistical Process Control) on a Windows NT-based system, with clear tolerance bars and diagrams. The system is housed in a closed aluminum profile housing with a transparent protective structure and is secured by professional safety light curtains. System Overview: Operating principle: It scans workpieces non-contact using the shadow image principle. Main application: Fast and precise measurement of complete workpiece contours and shafts in industrial environments. The measuring unit (KONTUR 408): - Vertical measuring system with integrated IR LED lighting and sensor technology - Measuring range: diameter from 4 to 85 mm, workpiece lengths up to 400 mm - Drive & scales: Brushless servo motors and high-precision Heidenhain scales - The device is housed in a stable aluminum profile frame with transparent protective walls and Sick safety light curtains. The control & IT infrastructure: - A robust 19-inch control cabinet (Rittal) houses a separate PC workstation that controls the evaluation and visualization (historically designed for Windows NT). - Various conventional interfaces on the rear (including RJ-45 network, serial COM ports, parallel LPT2 printer port, AUI interfaces, and BNC coaxial connections). Technical data: Manufacturer: Steinheil Model: KONTUR 408 Measuring range diameter: 4 mm to 85 mm Measuring range length: up to 400 mm Resolution diameter: < 0.5 µm Resolution length: 0.5 µm Resolution rotation: 0.018° Measuring accuracy (at 20°C): Diameter: ± 2 µm, Length: ± [5 + L [mm] / 100] µm Scanning rate: 2000 per second / 5000 per mm Measuring times: 10 to 50 seconds (depending on the number of test features) Measuring systems / scales: High-quality Heidenhain scales (length & rotation) Drive system: Brushless DC servo motors (controlled via Elmo NBA 10/200RH amplifiers) Process computer: VME bus computer in the Rittal cabinet Evaluation/Visualization: PC workstation (designed for Windows NT) Lighting: IR LED system (lifetime approx. 50,000 hours) Protection class: IP 54 Operating temperature: +10 °C to +45 °C Dimensions (W x H x D): approx. 590 x 900 x 380 mm Weight: approx. 100 kg (plus peripherals / cabinet) Installation position: Tabletop device / tabletop system "Everything from one source: We would be happy to offer you a suitable bank financing for your project." Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: 3D Coordinate Measuring Machine Machine Weight: approx. 2 t Travel Ranges X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 1,300 mm Pgedps Aa Np Nsfx Abusu Working Areas Working area Y-axis: 175–1,210 mm Working area Z-axis: 0–810 mm Baseplate Size of baseplate: 1,500 × 800 × 120 mm Digital Display Digital display: Grundig 3-axis Digimess Dimensions of digital display: 235 × 80 × 130 mm Performance Data Total power consumption: 0.04 kW Dimensions Space requirement: approx. 2.0 × 1.5 × 1.63 m EQUIPMENT Finely scraped cast plate with 4 adjustable feet, 2,000 × 1,500 mm Approx. 20 different probing and measuring styli Stiefelmayer guide system “A”

Condition: good (used), Year of construction: 2020, machine/vehicle number: 233949-1, Offer 26328 Measuring and inspection plate made of natural hard stone with cabinet base Technical data: - Measuring and inspection plate according to DIN 876 / 00 - Length approx. 1200 mm - Width approx. 800 mm - Plate thickness approx. 160 mm - Table height, height-adjustable, with cabinet base approx. 910 mm - Cabinet base with 1 door + 4 drawers - Drawer width 550 mm - Weight approx. 500 kg Pgods Ad Hh Dopfx Abueu

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Podpfs Aa Ii Uex Abuegu Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Price: EUR 23,000.00 plus VAT, ex works

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery without PC Podpozz Hywofx Abusgu Key Features of the RS Series High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Carl Zeiss Jena ULM 01-600C Universal Length Measuring Machine Manufacturer: Carl Zeiss Jena Model: ULM 01-600C Serial No.: 7104 Digital Readout: AE101 Description Carl Zeiss Jena ULM 01-600C universal length measuring machine with AE101 digital readout and a comprehensive set of original accessories. The machine comes from a former metrology environment and includes multiple fixtures, measuring attachments, tables, centers, and original storage boxes as shown in the photographs. The machine has been stored for a number of years and has not been tested recently. It is therefore offered in its current condition. Included Carl Zeiss Jena ULM 01-600C measuring machine AE101 electronic display unit Original measuring fixtures and accessories Various probes, supports, tables, and mounting equipment Original wooden storage cases Pgsdpfxj Ady Iko Abueu Everything shown in the photos Stored unused for several years Not recently tested Sold as-is Calibration status unknown

Condition: used, machine/vehicle number: 40411289, with measuring table, size: approx. 6000 x 2000 mm, table top weight: approx. 9,000 kg, measuring probe. Pjdpfj Af Nigsx Abusgu

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Multiple image processing filter functions ensure reliable results. Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Psde Afdr Aspfx Abuegu Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection.

Condition: good (used), For sale is a universal length measuring device with numerous accessories from the brand Helios, in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Helios Messtechnik • Type: 27 773 001 • Control model: Unitron 2 CHA • Universal length measuring device / adjustment device / shaft measuring device • With numerous accessories for various measurements • Mounted on a workshop trolley with contents (See pictures) • Condition: Used, functional (The cable or connector of the control unit would need to be replaced, presumably not original; the display turns off after a few seconds) Pedpfxozxiv No Abuogu Shipping costs via freight forwarder: approx. €140 International buyers are welcome! You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Subject to errors in technical data and prior sale.

Condition: used, Year of construction: 2004, Mitutoyo CRYSTA-Apex C7106 – used CNC coordinate measuring machine with a gantry design, professionally inspected and fully functional. The proven C-series from Mitutoyo stands for measurement stability on a granite base – ideal for precise 3D measuring tasks in the metrology lab. Technical data: - Measuring range: 700 x 1000 x 600 mm - Control system: UC-200H - Software: MCOSMOS-1 V4 - Probe system: Renishaw PH10M Equipment & accessories: - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Mitutoyo calibration certificate 08/2026 (WK-2060334-26) Included in the scope of supply: - Coordinate measuring machine CRYSTA-Apex C7106 - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Computer system with MCOSMOS-1 V4 - Mitutoyo calibration certificate 08/2026 Not included in the scope of supply: - Automatic probe changer / probe changing rack Condition: used, inspected – fully functional. Year of manufacture: 2004. Psdpjz Tffnjfx Abusgu Procedure: Inspection by appointment. Disassembly and loading will be carried out by us, transport on request. Location: Leonberg, Germany. Kneissl Messtechnik GmbH – your specialist for coordinate measuring technology with an accredited DAkkS calibration service. Installation, training, and instruction are optional.

Condition: used, machine/vehicle number: 31660787, with measuring table, size: approx. 3000 x 2000 mm, weight of table top: approx. 4,500 kg, measuring probe. Podpfs Af Nikex Abujgu

Condition: used, Purchase your coordinate measuring machine from the specialist in coordinate measuring technology with 30 years of experience – Kneissl-Messtechnik. General machine data: Machine type: Crysta-Apex C 7106 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Probing system: Renishaw PH10MQ (rotary/swivel head) Probe head: Renishaw TP200 Software: MCOSMOS-1 V4 Included in delivery: Pgsdpfx Aj Aa Nc Nsbueu - Coordinate measuring machine Mitutoyo CRYSTA-Apex C7106 - Renishaw PH10MQ rotary/swivel head - Renishaw TP200 probing system Not included in delivery: - Automatic probe changer / probe changing rack Condition: Used machine. Further technical details (year of manufacture, control system) available upon request. Processing: Inspection possible by arrangement. Dismantling and loading carried out by us, transport upon request. Kneissl Messtechnik GmbH – Your specialist in coordinate measuring technology with an accredited DAkkS calibration service. Installation, instruction, and training available as options. We offer worldwide delivery on request!

Condition: used, Year of construction: 2006, Measuring range: 500x400x400 mm, max. workpiece weight: 180 kg, with measuring probe, manufacturer: RENISHAW, type: MH20I, various ruby replacement measuring probes in a case, and evaluation hardware. Podpoz Nht Hsfx Abuegu

Condition: used, functionality: fully functional, In this listing, you are purchasing a ‘Keyence XM-1200’ coordinate measuring machine Item for sale: 1x Keyence XM-1200 with the following accessories including the accessories shown in the photos Pgjdpeyrcx Sefx Abuju Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 2,250 kg, type of input current: AC, travel distance X-axis: 1,200 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, input voltage: 230 V, Equipment: type plate available, 3D coordinate measuring machine in gantry design * Precise CMM with high performance * Probing head TESA-STAR-M (motorized), 7.5° indexable * Scanning probe system LSP-X1S Measuring range * X 1,200, Y 3,000, Z 1,000 [mm] Measurement uncertainty Pgsdpj Afzmdsfx Abusu * 2.4 + L/333, max. 5.0 [µm] / ambient temperature 18 - 22°C * 2.8 + L/200, max. 5.0 [µm] / ambient temperature 16 - 26°C Dynamics (without active vibration isolation) * 3D traversing speed 500 mm/sec * 3D acceleration 1.5 m/sec² Probe system * TESA STAR M - motorized * Hexagon HP-S-X1S Controller * Hexagon FBII Controller (retrofit possible) Software * PCDMIS CAD++ 2026 Accessories: * Probe set, extensions, modules * Probe changing station - 6 positions Optional services * We offer transport, commissioning, acceptance testing, and calibration * Calibration according to DIN EN ISO 10360-2 / -4, /-5 Warranty * 12 months, starting from the date of acceptance (if installed by MQS AG)

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required Pgedpfx Absw Ah Axsusu LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: used, Year of construction: 2008, functionality: fully functional, total width: 227 mm, total length: 840 mm, total height: 505 mm, overall weight: 55 kg, We are offering this used Endress+Hauser Promass 83F80 DN80 Coriolis flow measurement system, manufactured in 2008. Manufacturer: Endress+Hauser Pedpsz Ey S Ssfx Abuegu Model: 83F DN80 Year of manufacture: 2008 Condition: used, in excellent condition Type: Promass Coriolis flow measurement system If you have any questions or would like more information, please send us a message or call us. Multiple products are available; if you are interested, please contact the seller: Derikxgebruikstesturingenenmeer.