Used Grinding Mill / Granulator for sale (13,771)

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm Pjdpfoztmvpsx Aknegr

Condition: refurbished (used), FREWITT MF 8 Granulator / Oscillating Mill This granulator with adjustable sieve/support tray device (thereby preventing excessive sieve and rotor wear) can be used universally for dry granulation, sieving, crushing, wet granulation, etc. with a capacity of 2,000 kg/hour depending on the product properties. Infinitely adjustable gear motor (43-248 oscillations/min) Opening of the granulating chamber: 380 x 490 mm Pjdoxvzf Dopfx Aknsgr Active sieve area: 775 cm² Outlet height above floor: approx. 100 cm Drive motor: 2.2 kW Manufacturer: Frewitt Year of construction: 2002 Floor Space: 110 x 120 x 190 cm

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Pgsdon Tpmxepfx Akner

Condition: used, Cutting mill / cutting mills Pgjdpfx Aeztmu Esknjr Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Pedjztmyhopfx Aknsgr Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Pgedpfeztmzfsx Aknjr Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Pgedsztmwyjpfx Aknor Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw Podpfxjztmzrj Aknogr

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Pgodpfx Aeztmy Ijknor Drive motor 250 kw

Condition: used, SCHAUBLIN 202 TG-CNC W25-0127 is a CNC turning, milling and grinding centre engineered for precision, high accuracy and reliability. Capacities: 3 axes, centre height 60 mm, travels Z 300 mm, X 150 mm, collet bore 19 mm (W25), resolution 0.0001 mm, C‑axis 0.0001°. Specs: spindle up to 7000 rpm, power 5/6 kW, max torque 26.1/35.1 Nm, rapid traverse 20 m/min, supply 3×400 V 50 Hz, weight ≈3000 kg, overall 1930×1300×2040 mm. Accessories: coolant, Ethernet, chip conveyor, parts catcher, loader LNS Express 112+, rinsing guns, fire extinguishing system. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Pgsdpfx Akozqbg Renjr

Condition: used, Grinding rollers for Pfeiffer / Babcock bowl mill Podpjy Ittyefx Aknsgr Used, refurbished, and new available from stock Heavy-duty grinding rollers from a bowl mill available for sale Viewing possible by appointment.

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Pgodpfen Tpmujx Aknsr

Condition: excellent (used), Milling and grinding machine Make: Brand Type: SP 50 SEO 30 / KS Year of manufacture: 1997 Belt sanding unit KS 30 Belt width: 120 mm Belt length: 2100 mm Belt speed: 14 m/s Profile sanding unit DS 40 0.75 kW 1000 rpm Spindle stub diameter: 30 x 100 mm Podpfoxmgcvsx Aknegr

Condition: excellent (used), Composition: 30 kW granulator, vibrating screen, belt conveyor, weigh-packaging machine, sealing machine, new die + 4 rollers. In perfect condition. Podpozfhwfefx Aknegr

Year of construction: 1994, condition: good (used), -Cutting mill / granulator -working width: 600 mm Pgedpfjh Havtjx Aknor -rotor diameter: 400 mm -with sound insulation

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm, Rotor length: approx. 600 mm, Rotor diameter: approx. 450 mm, Heavy-duty design, Closed solid rotor, 3 rows of rotor blades (9 pieces), new Psdpoh Igygjfx Aknjgr 2 rows of stator blades (4 pieces), new with wear protection (Hardox), new, Screen basket + 1 screen, new, with control cabinet, approx. 6 m cable, newly wired, Housing temperature monitoring Hydraulic unit, Shredder, ideal for shredding solid parts, Testing / demonstration possible by appointment.

Year of construction: 1978, condition: not inspected (used), machine/vehicle number: 1177, Connected load approx. 18 kW Working width 140 mm Feed system (bottom) consists of: Conveyor belt 8800 x 60 mm (bottom) Conveyor belt 8800 x 40 mm (for extension) Feed system (top) consists of: Conveyor belt 7140 x 40 mm (top) Units: Pos. 1 - Preliminary cutter, 2.2 kW, 3000 rpm Pos. 2 - Milling unit, 3 kW, 6000 rpm Pos. 3 - Milling unit, 5.5 kW, 6000 rpm Pos. 5 - Belt sanding unit, 2.2 kW, 120 x 2060 Pos. 8 - Belt sanding unit, 2.2 kW, 120 x 2060 / frame sanding belt Pos. 4, 6, 7, 9 - Profiling and edge breaking units Dust extraction port 5x100 mm, 1x120 mm Pedpoiw D T Iefx Aknjgr

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Pgjdpfeyxy S Rox Aknor Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Psdpfx Aozvgdloknegr Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, functionality: fully functional, Equipment: documentation/manual, | price list | prices | prices | prices | prices | prices | prices | prices | > > > > > ecomas.pl/price-list < < < < < You can view the prices at the very bottom of the listing: Documents / 20215835-01.pdf We offer a high-quality, low-speed pellet granulator. The pellet mill is 100% manufactured in our plant at ECOMAS Polska Czernikowo. We guarantee equipment designed to operate continuously in a 24/7 system. Our machines produce pellets that meet EU standards – properly compacted, free of harmful additives, with a calorific value of at least 4.6 kWh/kg. The main advantage lies in modern, hardened dies and rollers (60HRC+), manufactured with CNC technology. Our dies ensure high efficiency, low power consumption, and long service life of both dies and rollers. Another benefit is the lubrication of the main shaft with oil and oversized bearings, which significantly slows down wear! Are you struggling with your current granulator – bearing failures, low efficiency, clogged die, high power consumption, rapid wear of parts, etc.? With our machines, these problems disappear. We approach each customer individually! See how our machines produce, type in YouTube: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW up to 55kW. Composition: - complete head with 2/3/4/5 rollers on cylindrical bearings - welded body – fully filled with Orlen Oil Transol VG 320 Podpoxk Ta Nofx Aknsgr - cylindrical-bevel gearbox (efficiency 98%) - base frame - bolted dies fi 230, fi 260, fi 285, fi 310, fi 400, fi 520; hole diameters 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - standard oil tank or optional tank with pump and oil installation (oil lubrication, easy oil replacement) - user manual - 12-month warranty The buyer receives a detailed operating manual and a one-year warranty. We provide full warranty and post-warranty service.

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Pgodpjdzp T Tsfx Aknor Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Condition: excellent (used), Year of construction: 2015, Granulator / Knife mill brand INAN TECH Model: IM38/100 Rotor length: 1000 mm Pgodpfx Aksxgfqfenor Rotor diameter: 380 mm Automatic waste feeding

Condition: used, Technical specifications: Max. grinding wheel diameter: 150 mm Dividing head for sharpening milling cutters, 24' Adjustable sharpening angle Manual feed Motor power: 0.3 kW Overall dimensions: Length: 700 mm Width: 800 mm Pgsdpfxszhufzo Aknor Height: 1500 mm

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Pgjdpfoq I Nw Iox Aknor

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Pgodpfxextiune Akner Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V