Used Hammer Mill 8-10 Tons + Pump for sale (68,576)

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Bodpfsyz R Unjx Apvjli Dimensions: 700mm X 1450mm

Condition: as good as new (ex-display),

Condition: like new (used), functionality: fully functional, CMU Shear 3000 x 8/10 Model 2E0 6/30 Motorized Backgauge Bsdpfsy R Diwox Apveli Blade Angle Adjustment Used Machine Internal Code: SER 63

Condition: used, Year of construction: 2010, Manufacturer: Richter Lunetten Type: Prism Block 10-3 Year of manufacture: 2010 Min diameter 50 mm Max diameter 400 mm Work load each unit 10 Ton Height adjustment 100 mm Prism angle 120 degrees New price EUR 60,000 Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 800 mm Bjdpfx Aewrq Szjpvoli Weight 800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: new, Sale, Lowara vertical pump/New Parameters : - Capacity max: - 8000L/h - 2400L/h. - Lifting height max: -76.5m - 23m - Motor power: 1.5 kW Bjdpfxevilhao Apvjli - Rotational speed: 2900 rpm We can help arrange a cost-effective shipping company or courier for you.

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge Blodoyt H R Uepfx Apvoi • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: new, I sell Lowara 15SV17P150T 8-24m3/h 15Kw pump, New. Bsdpfxevccyyj Apvoli I have different power of Lowara pumps. We can help arrange a cost-effective shipping company or courier for you.

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can handle even the most demanding tasks? Then the Durma press brake AD-S 803000 with a pressing force of 3000 tons might be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows for flexible and convenient positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. Furthermore, the press brake is a custom-made design and can be configured according to customer requirements to meet all individual needs. If you are interested in the Durma press brake, we would be happy to provide you with personal advice. Bsdoi Da Syjpfx Apvsli Other machines are also available and can be inspected. Please contact us for more information and let us work together to find a customized solution for your needs. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUAL) Sheet metal support systems: Movable support arm Stroke: 750 MM Back gauge type: X=1500 X, R Overhang: 1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Body type: Welded frame Lower tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical specifications available upon request. AD-R 80400 Bending force: 400 tons Bending length: 8050 mm With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would be happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on-site to respond quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing. Bjdpfx Asfin N Sopvoli

Year of construction: 2016, condition: used, overall weight: 300,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling MachineMachine: 17-10 FP 300 NC / 5 mSerial Number: 2.8304.06Original Year of Manufacture: 1983In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction.The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks.The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation.The system has been professionally dismantled and packed in containers.It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment.Manufacturer: Waldrich CoburgOverhauled by Waldrich Coburg (2016)Siemens SINUMERIK 840D slUniversal Fork Milling Head USP 300 C 350Additional Angle Milling Head WFU 500 SZ 400 F17Workpiece weight up to 100 tFull protective enclosureExtensive technical documentation availableDismantled and ready for loadingLocation: Port of Hamburg, GermanyImmediately available Bjdezc Sagspfx Apvjli Passage between the uprights: 3,500 mm 5-axis machining: Yes Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Blodpfew Dv Aiox Apvsi Including DA576 feeder Magnetic separator and air gravity separator

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm Bodpfjyh Hp Rox Apvsli -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: good (used), Year of construction: 2000, Technical specifications: Bljdpjzbmw Dsfx Apvei Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything can be configured according to your wishes, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor for back gauge & linear ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety guards with switches CE F. AKAS-LC II AKAS-3 M Motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport _____ Blsdpfx Apofirwmovei With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities on a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services relating to training and customer support. We would be happy to support you from Germany – from consulting, through purchase, and throughout the entire life cycle of your machine. With our German branch, we are always on site to provide quick and efficient support. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front supports for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Electrical equipment, in accordance with globally applicable standards Blsdpfx Apofiqdcovji Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional front sheet metal support system, sliding Special sea packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our mission is to be your direct contact on site and to offer you services related to training and customer support. We are happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always there when you need us to react quickly and efficiently. Here, we are your reliable partner for technologically high-quality solutions in sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor for rear back gauge and linear ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment: Control unit - ModEva Premium, 69T and 66T CE manual F. AKAS II M FPSC-B-C + safety guards with switch CE F. AKAS-LC II AKAS-3 M motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Bedpsfiryfjfx Apvjli Special packaging for overseas transport

Condition: new, Everything is configurable on request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, complying with globally applicable standards Electrical equipment, complying with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional sliding front support system for sheet metal Special sea-worthy packaging Bedpfx Aofiqa Repveli 8-meter press brake, 800 tons. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to provide you with services relating to training and customer support. We are happy to support you from Germany – from consultation to purchase and throughout the entire life cycle of your machine. With our German branch, we are always available locally to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: excellent (used), Perlmühle COMEC M 8 Stainless steel Double-walled Container volume: 8 liters In very good, ready-to-use condition, directly from production!!! Bjdpfjh Rakhsx Apvsli

Condition: excellent (used), Perlmühle Vollrath VMSM 2/8 B Ex-protected design Double chamber Grinding pot 2 x 8 l Double jacket Power 18.5 kW In very good, ready-to-use condition, directly from production!!! Bljdpfoh Svr Ssx Apvji

Condition: used, Manufacturer: Frewitt Fribourg Model : MGH-6-003 Type : Hammer mill Materials: Stainless steel Bljdpfey Ihdtsx Apvei Classification : Atex Motor Felten & Guilleaume : 4 KW Rotor milling tool : 260 mm Grinding chamber depth: 19 cm Product output : Ø 250 mm Product feed - >Rotary valve : Frewitt DR 0150 3 (0.12 KW) Various screens supplied with the equipment: 400 - 425 - 450 - 500 µm.

Condition: new, Year of construction: 2026, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 230V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. Bjdpforidpasx Apvjli LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 230 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Condition: new, Year of construction: 2026, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 400V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Engine 3 kW (4.1 HP) / 400 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Bjdpfxswymwcj Apveli Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Year of construction: 1985, condition: used, functionality: fully functional, Used Poeth Hammer Mill 2x75kW Drive Includes various spare parts Bledpfxoxx Rzgs Apvsi Includes feeder unit

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min - 28PS. - Very good condition. Bjdev Nrf Ejpfx Apvjli

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, stroke length: 65 mm, table width: 450 mm, table length: 320 mm, ram plate width: 280 mm, ram plate length: 180 mm, total length: 1,145 mm, total width: 970 mm, total height: 1,930 mm, overall weight: 1,250 kg, Equipment: documentation/manual, Excentric Press LEN 10C. Year of manufacture: 1987 (SMERAL TRNAVA, Czech Republic). - Press force: 10 Tons, - Number of ram strokes in continuous operation: 80 or 160 /min, - Number of single strokes: 45/min and 60/min. - Adjustable ram stroke: 6–65 mm, - Adjustment range between table and ram: 45 mm, - Throat depth: 160 mm, - Distance between table and ram: 225 mm, - Table size: 450 x 320 mm, Blsdpfxjy Ry Tfs Apvsi - Ram size: 280 x 180 mm, - Overall dimensions (length x width x height): 1145 x 970 x 1930 mm, - Pneumatic clutch (min. compressed air pressure: 0.4 MPa), - Motor power: 1.1/1.5 kW, - Press weight: 1250 kg.