DDR TS8/8 motor pump, 800l/min, 28PS.

Motopompa DDR

Condition: used, functionality: fully functional, Year of construction: 2012, Well-maintained and immediately operational MasterCut 92-15.5 ride-on lawnmower with a grass collection basket. This lawn tractor is ideal for private properties, larger gardens, and regular lawn care. Equipped with a reliable Briggs & Stratton PowerBuilt 15.5 HP engine, hydrostatic drive, and a cutting width of approximately 92 cm, the ride-on mower enables comfortable and efficient work. The grass collection basket is included and ensures clean collection of the clippings. The machine is in good used condition and is ready for immediate use. Technical specifications: Manufacturer: MasterCut Model: 92-15.5 Engine: Briggs & Stratton PowerBuilt Engine power: 15.5 HP Fuel: Gasoline Drive: Hydrostatic Cutting width: approx. 92 cm Grass collection basket: included Cutting height adjustment: stepless Tires: Lawn tread Condition: used, functional Equipment: Hydrostatic drive Grass collection basket included Robust cutting deck Comfort seat Easy operation Ideal for large lawns Condition: Used - Year of manufacture 2012 Bjdjzc Iv Rspfx Ab Djwt Shows age-related and usage wear Technically functional Immediately operational New drive belts for drive and cutting deck Scope of delivery: MasterCut 92-15.5 ride-on lawnmower Grass collection basket

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. Bsdpfx Absxc E Tro Dswt The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: new, functionality: fully functional, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Included: Spray gun High-pressure hose length: 10 m Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. Bwsdpfjwiwv Isx Ab Dot High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Bedpfxex Hp Iws Ab Djwt Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin Bwsdpjrgzv Njfx Ab Dst * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, JAN REILING BV has an extensive warehouse with more than 15,000 different DEMAG craneparts, from a nut to a complete crane. In addition to new parts, we also supply used parts, hoists and cranes. Our used hoists, cranes, parts and drives are ready in our warehouse completely overhauled. JAN REILING BV immediately supplies what you are looking for. JAN REILING BV has built up an extensive supplier network within Europe. In addition to DEMAG, we can also supply you with parts from all other brands quickly and affordably. We supply various Demag parts new from stock, such as a: ropeguides Rope brakes hoistingmotors drivingmotor gearbox brake hoisting motor bottomblock loadhook runningwheels trolley pushbutton radiocontrol cabledrum Bwsdeh Upx Iopfx Ab Dst types like : KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P1250 P1050 P1600 P2100 DH DMR DR DC PK DK contact us for the possibilities We supply both new and used

Condition: used, color: green, operation weight: 17,000 kg, Year of construction: 1987, Equipment: cabin, gripper hydraulics, Chassis: Wheel Driver's position: Cabin Design: Adjustable boom Equipment: StVZO lighting Attachments: Shovel Bucket: Excavating bucket, with teeth ID: 116943 11621 Std. Mobile excavator Fuchs 713 Adjustable boom All-wheel drive Ready for immediate use Fully functional We always have a large selection of used vehicles in stock. You can find more from our range under Non-binding offer, sale to businesses only, errors and prior sale excepted Advertisements and company logos on vehicles may have been digitally edited in photos Bwjdpfx Aev S Nr Uob Dst

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Bwjdpfxjh Hbpwe Ab Dot Type: TT - 157E Available: 14 pieces

Condition: used, Year of construction: 1978, operating hours: 9,125 h, 1978 | Hanomag MF 33C Massey Ferguson / for parts only | Used Wheel Loader | 9125 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 5 inspection points 5 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Only for parts recovery, not complete. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40580 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Bodpfx Abjy Iy N Us Dswt We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101358 (Roboter) / E14130752 (Steuerschrank), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN Bwjdpfxotk N E Ts Ab Djt We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.