Used Homag Belt Sanding Unit for sale (38,784)

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibrating and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior design companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller can be pneumatically adjusted, low wear due to ribbed steel roller Bodpszqvmrjfx Al Aodh Grain size compensation Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed speed can be steplessly adjusted via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the discharge end Constant working height of 900 mm by adjusting the upper part of the machine, thus can also be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm Workpiece height approx. 3 to 150 mm Common sanding belt dimension: 1360 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable discharge table Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar setting points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibrating roller. CE marking Operating manual Without the illustrated connection cable Original paint, only retouched in some areas Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA K CCC 1350, year 2004. Configuration: 55 KW steel calibration cylinder 45 KW hard rubber cylinder 37 KW soft rubber cylinder. Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Bdsdpfet Rn E Tjx Al Ash 3 motors 55 + 45 + 37kW Including full documentation. Condition very good ! Available immediately.

Year of construction: 2008, condition: excellent (used), I sell the widebelt sanding machine SGJ 1300R-RP. Year 2008 Configuration: steel cylinder / motor 37 KW combi unit rubber cylinder + pad / motor 22 KW Cleaning unit with dust extraction Feeding speed adjustable with variator Pressure pads for short elements on each unit. Infeed and outfeed table for long elements. Working height 3-150mm Working width 1300mm Total power 64 KW Total weight 4000kg Bjdpfx Ajkd Am Ejl Aodh Condition very good ! Available immediately.

Condition: used, Year of construction: 1995, Number of belts: 2 Max. working width: 920 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibrating roller Design of 1st roller: Grooved steel roller Abrasive belt length 1st unit: 1525 mm Abrasive belt width 1st unit: 930 mm Abrasive belt speed 1st unit: 16 m/sec Bodezxt Agspfx Al Aedh 2nd belt: Combination unit Design of 2nd roller: Grooved rubber roller Sanding shoe 2nd unit: rigid Abrasive belt length 2nd unit: 1525 mm Abrasive belt width 2nd unit: 930 mm Abrasive belt speed 2nd unit: 16 m/sec Material thickness measuring device: Yes Fixed feed rate: 4.5 + 9 m/min Control: Hand control panel Elec./pneumatic belt oscillation: Yes Infeed height: variable (lower table moves) Table stroke: electro-motoric Table display: mechanical digital display Operating pressure: 6 bar Weight approx.: 1100 kg Motor power: 11 kW Extraction diameter: 200 mm Storage location:

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical specifications: - max width of the workpiece 900mm - max height of the workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - slipping rubber roller I unit - 2 x slipping rubber rollers Bedpfx Alozx Rzye Ajdh II unit - slipping rubber roller, smooth – from below: - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - operating pressure 6-8 bar - diameter of the dust extraction port 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Advantages: – Italian-made, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6720 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Bdjdpoywrzbjfx Al Ajh Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Bdsdpfjwnr A Hox Al Aoh Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: used, Year of construction: 1992, functionality: fully functional, HOLZ-HER Type 1370 wide-belt sanding machine / fine sanding machine, manufactured in 1992. The machine was last used and is described as being in working order and having been inspected. Technical data: - Working width: maximum 1,100 mm - Workpiece passage height: 2–100 mm - Sanding unit: 15 kW - Brush: 0.55 kW - Feed: 1.1 kW - Total power: approx. 17 kW - Connection: 380–400 V / 50 Hz - Dimensions: approx. 1,730 x 1,340 x 1,380 mm - Space requirement, depth including roller tables: approx. 2,500 mm - Weight: approx. 1,935 kg, plus roller table approx. 80 kg - Dust extraction connection: 250 mm Accessories: roller tables, sanding belts, tools, operating manuals, wiring diagram, and spare parts documentation. Important note: The rubber transport rollers have hardened due to age and should be replaced as soon as possible. Bdjdpjzrn Abjfx Al Ajh Location: 65618 Selters (Taunus), Germany.

Condition: excellent (used), Catalog number: 7808 TECHNICAL DATA max. width of the processed workpiece: 1100mm Bdjdpfjztambex Al Aoh max. height of the processed workpiece: 160mm 2 processing units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above 2 metal rollers, sliding processing units cleaning brush – from below pulling belt pneumatic belt oscillation with photocells electric table lifting 2 feed speed types 1.1kW motor: 15kW with pneumatic brake additional pneumatic shoe working pressure: 6-8bar diameter of extraction nozzle: 2x160mm, 1x120mm overall dimensions L/W/H: 2700x2100x2200mm weight approx.: 3000kg – German production – 2 processing units – additional pneumatic shoe – unpainted – used grinder, very good condition Net price: 32900 PLN Net price: 7650 EUR, depending on an exchange rate of 4.3 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Equipment and technical data: with 2 combination units with 2 contact rollers, 1 x 65° Shore, 1 x 85° Shore and 2 air sanding shoes Sanding width 1350 mm Sanding belt dimensions 1360 x 1900 mm Workpiece thickness max. 150 mm 1st unit with 15 kW 2nd unit with 15 kW Cleaning brush Roller table at the infeed Roller table at the outfeed Bdsdpfx Aloy Dkhgs Ajh Infinitely variable feed rate from 2.5 to 12.5 m/min Weight approx. 3700 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, working width: 1,300 mm, overall weight: 4,700 kg, height adjustment type: electric, Wide belt sanding machine Manufacturer: Viet Type: S3 223 TM Year of manufacture: 2006 (CE) Well-maintained calibrating and fine sanding machine from a small carpentry shop/manufacturer, suitable for sanding solid wood, veneer, and lacquered surfaces. Working width: 1300 mm Constant table height, motorized height adjustment of the machine’s upper part (machine is also suitable for inline operation) Automatic workpiece detection, thickness measurement, and infeed protection 1x cross sanding unit, sanding belt dimensions 150 x 5520 mm, speed adjustable 1x combination unit with steel calibrating roller and electronic segment sanding shoe, segment spacing 25 mm, speed adjustable 1x cleaning brush for removing dust from workpieces 1x ionizer to prevent static charge Bsdpfx Aezd Aylel Asdh Conveyor belt with vacuum for short/small workpieces Feed rate continuously adjustable Operating voltage: 400 V, 50 Hz, 3 phases Dimensions approx. 2500 x 2850 x 2280 mm (L x W x H) Weight approx. 4700 kg

Condition: excellent (used), CATALOGUE NUMBER: 6916 TECHNICAL DATA - Max. width of workpiece: 200mm - Max. height of workpiece: 150mm - 2 sanding units: Bsdjzty Npspfx Al Asdh upper – metal roller + shoe + metal roller lower – metal roller + shoe + metal roller from above: - pressure roller, metal - sanding unit - slip pressure roller, metal - cleaning brush - conveyor belt from below: - conveyor belt - 2 slip metal rollers, smooth - sanding unit - pressure roller, metal - cleaning brush - delivery roller - electrically adjustable sanding height - pneumatic oscillation of sanding belts - stepless feed rate adjustment - feed motors 0.55kW - main motors 2x4kW - air consumption 6-8 bar - diameter of dust extraction nozzles 3x80mm, 1x120mm - overall dimensions L/W/H 1800x2070x2000mm, weight 1422kg - Made in Germany, unpainted - Very good condition, used sander Net price: 22900 PLN Net price: 5326 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Year of construction: 2009, condition: excellent (used), I sell the widebelt sanding machine RWT BS950RP, year 2009. Configuration: Hard rubber cylinder Combi unit soft rubber cylinder + pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm Bdodpfx Alsiuc Sge Ash 1 Motor 11kW 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Bodjihfawjpfx Al Aedh Configuration: 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2750kg 3 motors 18,5 + 15 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: used, Year of construction: 1998, Belt sanding unit for machining workpiece side surfaces with pneumatic belt tensioner. Technical data: Belt sanding unit: - Tilting device from -1° to +15° - Belt size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - Two-roller device for free-belt sanding. Roller diameter 75 mm, adjustable center distance from 225 - 320 mm Bdjdsxqqczepfx Al Ash - Swiveling horizontal slide, stroke 130 / 220 mm, operated via handwheel - Fixed mounting for sanding unit - Feed device, pneumatically controlled, stroke 5 - 20 mm Table unit: - Linear workpiece carrier table with automatic feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working travel freely programmable by the automation - Cable carrier track for cable management and pneumatic hoses - Clamping of workpieces by spring, release by pneumatic cylinder

Condition: excellent (used), Catalogue number: 7840 TECHNICAL DATA - Max. workpiece width: 630mm - Max. workpiece height: 110mm - 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration + pad + metal roller - Top section: - Metal infeed roller, slip type - Unit - Metal slip roller - Unit - Metal slip roller - Bottom section: - 2 metal slip rollers - Feed belt - 2 metal slip rollers - Pneumatic oscillation of belts - 2 feed speeds - Motor: 2×7.5kW - Electric table lift - Operating pressure: 6-8 bar - Extraction port diameter: 2x160mm - Overall dimensions (LxWxH): 1650x1060x1970mm - Weight: 972kg ADVANTAGES – Polish-made – 2 processing units – Not repainted Bjdpfszr I Anox Al Ajdh – Very good condition – Used sander Net price: 20,900 PLN Net price: 4,980 EUR (calculated at 4.2 EUR) (Prices may change with larger exchange rate fluctuations)

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Used Machine Year of Manufacture: 1976 Features and Technical Specifications: - Grinds from below - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure bar - Electric adjustment of tool thickness with an easy-to-read digital display Bsdpfx Aozk Nyrel Asdh - Pushbutton with contactor control - Grinding width: 1350 mm - Workpiece thickness: max. 150 mm - Grinding belt width: 1360 mm - Grinding belt length: 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Motor power: 17.5 kW Dimensions: 1800 x 1100 x 1520 mm Weight: 2600 kg Availability: Immediate Location: Röllbach

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Bdjdpfx Alszydafe Ajh Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. Bodpfxozlxp So Al Aodh PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg Bdedpfoy Ehiwex Al Aoh - immediately available -

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of the dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg - Made in Germany - 2 units Bdodszw Dchopfx Al Ash - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Bjdpfszz Nmmox Al Aodh

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: 360192021, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 5,600 kg, grinding height: 120 mm, power: 29.66 kW (40.33 HP), height adjustment type: electric, type of input current: DC, grinding belt length: 2,620 mm, workpiece height (max.): 120 mm, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, Roller, shoe, cleaning brush, dust removal, vacuum table. Table height is fixed. Two sanding belts. Bjdjz Akplepfx Al Aedh

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Bodpfx Asxnm Rcsl Aedh Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: used, Year of construction: 2021, - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Wide-belt sanding machine Manufacturer: Felder Type: FW 1102 P Year of manufacture: 2021 Technical data - Contact roller unit - Fine sanding with segmented, electro-pneumatic sanding shoe, 25 mm segment width - Touchscreen color display 7" - Digital grit adjustment - Vacuum table incl. blower in the machine frame - Stepless feed speed 2.5 - 18 m/min, controllable from the touchscreen - Grinding width: 1100 mm - Grinding height: 3 - 170 mm - Grinding length: 1900 mm Note: Bodpfx Ajzuzcmol Aodh The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.