Control system: MS-100
Length of the working table: 12000 mm
Width of the working table: 3500 mm
Maximum thickness of the cut sheet metal: 10-200 mm
Maximum feed rate in X-axis: 30000 mm/min
Maximum feed rate with simultaneous operation of the X and Y axis drives: 7000 mm/min
Accuracy of positioning: 0.3 mm
Total power demand: max. 1.5 kVA
Machine weight: 1650 kg more
A plasma oxy-fuel cutting machine from ESAB is for sale here. The machine is fully functional and in very good condition. This was in the Linde training center for years and was only used for training purposes. As a result, the wear was correspondingly low. The machine is equipped with a propane oxy-fuel torch, an acetylene oxy-fuel torch and a plasma torch with 200A
Mild steel up to 1-40mm stainless steel 35mm
Structural steel oxy-fuel 20-200mm
The cut is made on a water ta... more
CNC portal cutting machine plasma and oxyfuel, 12000 x 3000 mm
Flame cutting table / processing area 1st portal 9000 x 3000 mm plasma
- permissible sheet thickness up to 120 mm plasma
- MicroStep cutting support Rotator R5 Plasma Kjellberg
- MicroStep calibration station for Rotator R5
- Kjellberg plasma source HiFocus 440i neo with autom. Gas console, stepless
adjustable from 10-440 A.
- Kjellberg KWE cooling water unit 360
- Kemper filter system 912200280
- Kemper SparkTrap
Flame ... more
CNC portal flame cutting machine with plasma
Type: Suprarex SXE-P 5500
Year of construction: 2001
Working area L/B (table): 3.000 x 12.000mm
3 oxy-fuel burners with single ignition
Extension to 6 burners by means of strip burners possible
cutting range: 3 - 300 mm
Rotatable 3-torch unit for weld seam preparation
1 plasma torch with Hypertherm MAX 200
Marking device by means of arc (ARC marker)
Suction: Cyclone Fa. Voest
working width 6500 mm
Travel 10000 mm
burner heads 4
no. of tables 4
table length 5000 mm
table width 2000 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m more
table width 1250 mm
table length 1250 mm
Control Replicator 1100
feeling width 1250 mm
width of cut 1500 mm
cutting length 3000 mm
total power requirement kW
weight of the machine ca. 1 t
dimensions of the machine ca. 4,05x2,2x1,85 m
Coordinate cutting machine PORO-OPTIMAT 12,50 / 30 MSR with Replicator 1100 /
left extension consisting of:
- Cross-wagon with coordinate drive via rack / pinion for both axles
- Magnetic Toothed Couplings
- base with scanning table 1250x1250mm (moveable)
table width 1500 mm
table length 4000 mm
burner heads 2
cutting thickness max. 3 - 150 mm
weight of the machine ca. 3,0 t
dimensions of the machine ca. 2,2 x 4,8 x 2,0 m
CNC plasma and oxy-fuel cutting machine
- Control stick moving along, right
- Steel band guide in cross direction
- Track with double-sided rack
- MultiJet BIF 220 burner
- MX / 200-T plasma torch trolley
- Oil spray device
Incl. ESAB PRECISION PLASMA power source more
The new Onyx CNC cutting machine is the result of over 25 years of cutting experience. It combines the most modern components
and a solid mechanical construction for demanding users who attach great importance to a particularly good working ergonomics.
The machine gantry has been modified with regard to even greater rigidity and temperature resistance in order to achieve maximum
to guarantee reliability and cutting accuracy even with material thicknesses up to 300 mm.
A specially developed safet... more
Light mark projector for flame cutting machines with drawing scanning
-Power: 24 V/100 W
-f: 110 mm
-Price: per piece
-Number: 2x available
-Dimensions: 230/93/H125 mm
-Weight: 0.8 kg more
Number of drilling agregates:3 Stk.
bore diameter:40 mm
total power requirement:30 kW
weight of the machine ca.:6,5 t
max. workpiece height:600 x 50 x 6000 mm
Min. material size:80 x 8 mm
machine dimensions (length x width x height):2000 x 1900 x 2800 mm
Used Peddinghaus FDB 600 drilling and flame-cutting-machine for drilling and flame cutting of steel sheets and flat steel. The Peddinghaus FDB 600 is designed for processing flat steel with a width of min. 80 mm and max.... more
Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution.
The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles).
The design of the machine has been optimized over the years for maximum reliability, as confi... more
Automatic flame cutting machine portal with
Burny Numerical Control.
3 oxyacetylene cutting torches plus one interchangeable plasma torch.
Bank of Oxycut of 3.5 x 24m. more
CNC portal flame cutting machine
Type: Satronik D 5000
Year of construction: 1998
CNC control: CNC 801
2 oxyfuel burners
track width: 5.000 mm
Running track length: 8 m
cutting area: 4 x 6 m more
The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important.
Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization.
Used in more than 400 industrial plants worldwide, the ... more
1 gebr. Tisch fuer Brennschneide- und Schweissarbeiten
mit Rollenbahn, Rollenbreite 2 x 300 (570) mm
Arb.-Ber.: Tischauflage 3000 x 1250 mm,
Tisch ca. 3200 x 1500 x 615 mm
Rollenbahn ca. 3150 x 600 x 615 mm more
1 used SPS controlled pipe cutting machine
Type SCM 1000
year of construction 2008
Serial number 9067
The machine is used for plasma or oxyfuel cutting for fitting or penetrating tubes
The rotary movement as well as the longitudinal movement of the torch carriage is carried out by PLC controlled AC motors,
diameter range 100-1000 mm
max.load 2000 kg
equipped with material roller support blocks
used in first-class condition
incl. control description and all technical documentat... more
The following article is for sale:
- Our offer number: 129/108
- Cutting machine mobile in both directions
- Manufacturer: Messer Griesheim
- Type: Secator-SN
- Serial number: 1901188
- Supply voltage 240V
- with burner
- Speed infinitely variable
- with weight
- Weight : 22 kg
- optical condition according to photos
- Shipping nationwide 25€
Information on the purchase of our articles:
We would like to point out that we are not a specialized trade for the goods offer... more
# Technical characteristics unit Norm
1 Dimensions of processed sheets material
2 Speed of the cutting tool along the contour
3 Number of cutters pc 2
4 Type of tooling Oxigen
5 Applied gas Oxigen, Propane
6 NC system HYD-2300B CNC
7 Adjustable-speed drive and servo motor
8 Flame level control gauge capacitance-type
9 Cutter’s height controller CHC - 400
10 Arc triggering automatic
11 Lifting and lowering drive Au... more
Year of construction + No.: 2006 / 61242506-1224
track width: 3.600 mm
working width: 2.000 mm
working length: 8.000 mm
machine length: 10.000 mm
Control: CNC 2030 right-hand drive version
1 oxy-fuel burner with capacitive height sensing and ignition device
Gas type: Propane
1 Plasma HPR260 with automatic gas console
piercing unit with fast preheating
Plasma: HPR260 with automatic gas console
cutting table 2.000 x 8.000 mm
Environmental technology: on request
X-Y contour cutting with oxyfuel + plasma cutting
processes, program library 53 Standard Geometry
selectable kerf compensation, on + off
cutting flags, chain cutting, single step + again
fetch function, read in, man. Programming, scaling,
Mirroring, rotating, serial RS-232 interface for
with interfaces Cable
Connection of design software to a
off-line central computer,
Supply voltage: 230 V 50 Hz
Workshop-tested used machine
The oxyfuel or plasma cutting system is a portable cutting solution for sheets up to 3000 x 1500mm.
The system can be mounted on a cutting table on the track (cutting table not included, can be offered or drawing can be provided).
For cuts up to 100mm in mild steel this is a very economical and good solution.
Plasma source can be easily integrated.
The installation is carried out independently, assemble together, install software on the computer or use the macros on the machine.
flame cutting machine boom optical control
Type: Corta KS 1500/2000
Year of construction: 1982
optical control KS07A with Photoskop PH19
working area: 1.500 x 2.500 mm
2 oxyfuel burners
1 plasma torch with power source Kjellberg FineFocus 450
in alternate communication
Sell an Esab oxyfuel/plasma cutting machine.
Good used condition, was only used for repair cuts
Autogenous up to 80mm
Plasma up to 6mm
In addition, the plant is equipped with an Alpha CAD/CAM program.
With this program cutting data from 2D-CAD programs can be imported via network.
Plasma cutting must be started manually, that would be the only shortcoming.
But for a technically experienced owner this should not be a problem.
Plasma torch (never mo... more
CNC portal flame cutting machine
Year of construction: 2004
CNC control: CNC2010
1 oxy-fuel burner
Working area: 2.5 x 15 m
can be shortened as desired
Runway with beam 17 m
MESSER 8 burner CNC 200 mm gas burner
Year of production: 2007
Type: Omnimat L5600
The machine is in very good condition. The machine is equipped with 8 gas burners. Solid table 13 m x 4 m divided into extracting sections, all software with extensive machine documentation.
The set is SIDEROS Ecoline / Eco 16CT, 2014, 18.5 kW power. more
The Machineseeker Trust Seal gives buyers the ability to detect at a glance whether they are dealing with a trusted seller or not .
What do we verify?
Check of trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of accessibility to main phone number.
Credit report may not contain negative criteria.
Buyer complaints can lead to withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no entitlement to the grant of the Machineseeker Trust Seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.