Used Karl Klink Broaching Machine for sale (64,192)

Condition: good (used), Clearing machine Manufacturer: Hüller Model: 18 S - 2 coolant pumps, each with a capacity of 200 L/min x 2 = 400 L/min - 2 chip containers arranged side by side for easy exchange Total weight: 15 tons Dedpfx Aey U Icpsbaskn Operating voltage: 380 volts, 50 Hz Control voltage: 220 volts, 5 Hz Rated current: 60 A

Year of construction: 2012, condition: excellent (used), Railway machine Karl Deutsch - UWS 2500 Dkedpfx Aboy D Rugoaen MACH-ID 9494 Make: Karl Deutsch Type: UWS 2500 Year: 2012 stationary magnetic particle crack detector deutroflux uws 2500 for longworkpieces movable carriage for lengte adjustment 2 phase shifted AC currents generate magnetic field thus, cracks in every direction are detected skin effect of AC uniform magnetization and demagnezation even in complicaties workpiece geometrie like cranckshaft new price EUR 250.000 Length:4500mm Width:1500mm Height:2300mm Weight:1750kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Dodpfswpud Aox Abaekn Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t Djdpsy Ty Afjfx Abaekn dimensions of the machine ca. 1x1x2,2 m

Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories -Ram stroke / pulling length 1300mm -Pulling force 6000kg -Incl. 38x clearing pins -Incl. 95x guide bushings -Work bench -Setting plates -Crane -Platform -2x tool cabinets Dsdeza U Alepfx Abajkn Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Robust pillar drill press from the VEB Werkzeugmaschinenfabrik Fritz Heckert, manufactured in the German Democratic Republic (GDR). Classic industrial design – heavy cast iron housing, reliable mechanics, simple and durable technology. Heckert machines are highly sought after by collectors and workshop operators due to their robustness and ease of repair. Suitable for workshops, metalworking shops, vocational training centers, and collectors of East German machine tools. Technical data: - Manufacturer: VEB WMW Fritz Heckert, Karl-Marx-Stadt (GDR) - Type: Bench/pillar drill press - Power supply: 3 ~, 380/220 V, 50 Hz - Current: approx. 1.8 A / 2.5 A - Original nameplate: yes, clearly legible - Weight: approx. 200-400 kg - Year of manufacture: approx. 1960s-1980s (GDR production) Collection / Transport: Self-collection with forklift / pallet truck. Loading on site is possible. Shipping by freight forwarder on a pallet can be arranged. Dkodpfxjzacbij Abaon

Condition: used, Year of construction: 1982, pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min Djdpfxeyif Nxj Abajkn return speed 10 m/min tool length - max. 1200 mm table hole 50 mm total power requirement 6 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Djdpfx Aeyif Nlobaekn Machine comes with accessories, such as holders and broches.

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm Dkjdeycxlcopfx Abajn total power requirement 25 kW weight of the machine ca. 4,2 t

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical broaching machine with numerous holders Dsdpfsy Nka Tsx Abajkn

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Make: FORST Dodpfx Abev Htluoajkn Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Year of construction: 1993, condition: refurbished (used), machine/vehicle number: 3694/895, machine type: vertical internal broaching machine manufacturer: Rausch Dedpfx Aogw Hvnebajkn type: RS 3/1000 built in: 1993 totally rebuild in: 5/2021 by WiemersAG weight: 400kg pulling force: 3.000kg (30kN) broaching speed: 3m/min & 6m/min return speed: 6m/min maximum stroke: 1000mm maximum tool length: 1200mm table size /work surface: 430mm x 320mm (340mm x 220mm) working stations: 1 pcs drive: mechanic drive system engine: 2,5kW/ 3kW power supply: 400Volt/ 50Hz equipment: coolant system remark: machine under power in stock optional accessories available on request: tools, workpiece holder More detailed technical informations in the datasheet (german) in the annex. Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Year of construction: 1973, condition: refurbished (used), machine/vehicle number: 5116/447, machine type: vertical internal broaching machine manufacturer: Rausch (Haan/Rhld) Dodpfegw Hvcox Abaekn type: RS 6/1000 built in: 1973 totally rebuild in: 3/2021 by WiemersAG weight: 800kg pulling force: 60kN (80kN) broaching speed: 3m/min & 5m/min return speed: 10m/min maximum stroke: 1000mm maximum tool length: 1200mm table size /work surface: 610mm x 470mm (520mm x 320mm) working stations: 1 pcs drive: mechanic drive system engine: 5,5kW / 8,2kW / 8,2kW power supply: 400Volt/ 50Hz equipment: coolant system remark: machine under power in stock optional accessories available on request: tools, workpiece holder More detailed technical informations in the datasheet (german) in the annex. Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling Dedpeytvyxjfx Abajkn - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Djdpfew Dugajx Abajkn Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Year of construction: 1972, condition: used, max. tractive force: 10 to, max. stroke: 1250 mm Dksdecdtnhopfx Abajn max. cutting speed: 10 m/min. max. return speed: 25 m/min. clearing: 3 pieces passage width: 470 mm spacing of the raumstellen: 125 mm table: 400 x 400 mm special equipment: Discharge of spares by permanent magnetic spares conveyor 1 hydraulics, 1 working platform, el. hydr. shaft and end piece holder fixing, automatic loading device

Year of construction: 1987, condition: used, machine/vehicle number: 34, gr. tractive force: 10 to gr. stroke 1000 mm cutting speed: 7,5 m/min return speed: 24 m/min Dodpfx Abend Dmeaskn weight: 6,2 to Machine is suitable for tube clearing

Condition: good (used), The machine is in good technical condition, testing can be arranged by prior agreement. Dkjdpfjy Amn Hox Abaen

Year of construction: 1980, condition: used, max. tractive force: 10 to Djdpfx Aecdtpljbaskn max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm turning: 3 pieces weight: 4,8 to automatic tool feeder hydraulic drawing head and end piece holder locking device automatic loading device for workpiece diameter up to 100mm magnetic belt conveyor

Year of construction: 1959, condition: used, gr. tractive force: 16 to. gr. stroke: 1250 mm Dkedpj Rwa Ujfx Abaen cutting speed: 5,6 m/min return speed: 30 m/min

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine. No.: 1413 General / technical data: used vertical hydraulic indoor rasping machine with up to 3 rasping points in a ready to use condition tractive force: 13000 KG (maximum) room length: 1200mm Raeumstellen: 3 pieces Spacing between the racks: 100mm Diameter of the pulling head: Ø 85mm Dkjdpjdbmgmefx Abaon passage width between the cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1150 x 1500 x 3725mm (tool feeder extended) Power supply / connected load: 380Volt 50HZ / 7,5KW Accessories / special equipment: The drawbridge of the machine has 3 space tool holders, the tool table has 1 space (changeable). The tool clamping system as well as the tool feeder is provided for a spring-mechanical locking (DIN 1415). The machine has an automatic tool feeder, the existing tool feeder is also available for only 1 tool (middle space). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in a good condition according to its age and is ready for immediate use. It is designed for manual production with medium batch sizes. The machine has

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: used vertical hydraulic indoor rasping machine with 3 rasping points in a very good condition Dkjdpfjdffzfjx Abaon tractive force: 25000 KG clearing length: 2000mm wheel positions: 3 pieces Distance between the wheels: 160mm diameter of the drawing heads: 3 x Ø 100mm Clearance width between the cylinders: Nominal size 500mm passage width between the cylinders measured: max. 590mm Cutting speed: hydraulically infinitely variable from 1m/min to max. 10m/min Return speed: hydraulically infinitely variable from 5 to max. 25m/min Space requirement of the machine: (w x d x h) approx. 3400mm x 3400mm x 6900 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 22 KW Accessories / special equipment: The machine is currently without work table. On the machine was a workpiece sliding table mounted with a special workpiece clamping device for external broaching. (The workpiece sliding table is changeable). The tool clamping system is equipped with a hydraulic lock in the draw bridge as well as in the feeder. The machine has a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and is still in its original paint. It is designed for serial production, for optimal use a foundation (pit) is ideally needed. Drawing heads and needles

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs Dkodpsd I R Ngofx Abaen drive: hydraulic system equipment: coolant system, chip conveyer remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs Dkjdpfx Aocc D Ddjbasn drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, Year of construction: 1986, overall weight: 6,500 kg, power: 42 kW (57.10 HP), input voltage: 380 V, broaching length: 1,600 mm, number of broaching positions: 1, workpiece diameter (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500kg Mach. No.: 3269 General / technical data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600mm Broaching stations: 1 piece! Passage width between the cylinders: max. 540mm Cutting speed: hydraulically stepless adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically stepless adjustable up to max. 18 m/min Required space for the machine: see image of machine layout plan Power supply / connection value: 380 Volts 50 Hz / 42 kW Accessories / special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-mechanical locking (DIN 1417) in the pulling bridge. The tool feeder system is hydraulically-mechanically locked. The machine has a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in mass production for medium and large batches; for optimal use, a foundation (pit) is ideally required. Pulling heads and needle pushers are available on request. The machine can be inspected at our warehouse. General information We constantly have a large selection of about 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock is ready for demonstration and inspection. If required, we can offer you used equipment such as pulling heads, needle pushers, broaching tools, and other specific accessories. Dedpfswqmaxjx Abajkn We are also a contract broaching company and can assist you with technical questions from 50 years of experience in broaching technology.