Used Destacking device for sale (65)

Condition: excellent (used), Year of construction: 2017, Vacuum lifter from Schmalz for heavy panels with new suction cup rubber. Load capacity 150 kg horizontally and vertically. Suction cup can be motor-pivoted 90 degrees. Suction box 1000 x 675 mm. Acoustic warning signal if vacuum is too low. 400 V, 1.5 kW. Can be attached to an on-site chain hoist. CE mark. No inspection booklet available. Suction cup rubber replaced. As good as new. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "Other offers from this supplier." Bwjb Ha Isv S Synehwsl

Year of construction: 2007, Condition: used, Extra-flat lifting table Bsb Ha Iewfh Tcshwewl Load capacity 1250kg 2 units available 380V

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Max weight on belt: 400 kg Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA Bwob Ha Ihev Rpxfjwjl

Condition: like new (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, frequency: 50 Hz, LITTLE BUFFER TABLE Bwobowcp Ehj Ha Ihwel PERFECT CONDITION (Can be converted for other side) Option Conveyor belt 4m

Condition: ready for operation (used), Tilt destacking for layer separation Bjb Ha Iheuzht Tewewl Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 031001-1, 3 Sicko STM 80 stacking units Bwob Ha Ihoumxb Rjwol Data see photos (data sheet) If you have any questions, please contact Mr. Klaus Schmidt by telephone only.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Beb Ha Ihowbp Nwewjwl Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: used, Automatic stacker Motorized feed rollers Coin counter 380V Bwsb Hjwfh Rzoa Ihwol

Condition: used, Year of construction: 2010, machine/vehicle number: 13820, - Manufacturer MAKOR - Type. CSRT, Loader - Year of construction 2010 - Max. Part width 180 mm - Min. part length ~ 1,000 mm - Max. Part length ~ 6.500 mm - Length of the longitudinal conveyors ~ 6500 mm - Distance between the lifting rakes centre Bwob Ha Ihjumvtwjwol - centre 400/530/700/770/1150/1270 mm - Length ~ 6.500 mm - Weight 750 kg - Incl. control unit - In stock in Blomberg

Year of construction: 2001, Condition: good (used), Functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Manufacturer: Pinomatic OY Type: POS 9+10 S/N: P1033 Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm Bsb Hjv S Hfxea Ihwjwl 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Condition: good (used), Automatic board stacker for use after a moulder, resaw, crosscut, double end tenoner etc. Pack size up to 6,5m x 1,2m x 1,2m high. Bweb Hsr E A Eusa Ihwsl Capable of stacking 10 layers per minute.

Year of construction: 2017, Condition: excellent (used), Return System for panels durable...customized...space-saving...low maintenance The intelligent solution for returning the panels around the edge banding of all manufacturers Working fild L 9 500 mm. x W 6 500 mm.. Functions: Workpiece recirculation Rotation 0° - 90° - 180° Parts measurement Destacking function incl. stacking building (only Return 02) Manual mode for oversize-panels Parts dimension Largest part 4100 x 1300 mm Smallest part 300 x 80 mm. Load max 150 KG *The surface must be smooth, closed, impermeable and without cutouts! Energy supply Electricity 400V / 20 Amps. Beb Hsv Raggja Ihwjwl Pressure air 300 - 420 NL/min System properties Stacking height 800 mm. Movement speed up to 120 m/min Cycle time - max. 8 cycles/min; transport from removal station to return belt lower cycle times in case of destacking. 3-axis manipulator for part transport with vacuum cycle time: 8 - 15 seconds depending on travel distance pick up with suction pads - max. 150kg movings: turning 0° - 90° - 180° pick up of parts and delivery on belt conveyors or roller conveyors stacking possible colour: RAL 7035 portal lenght 9,5 m steel construction to support bridge, incl. Steel posts and crane runway, energy supply via energy chain and installation material Cgs2Kb3Bqi portal width 6,5 m bridge made of aluminium profile, with double sided tooth belt drive, master/slave control incl. Energy supply via energy chain. Made by Barbaric Made in Austria The company has now changed the lay-out therefore this Barbaric stacker is not needed any longer. The machine can be inspected at any time here in Norway. New price in 2017 was 198 000 euro. Now only 30 000 euro. Excellent condition. Request more information DOCUMENTS 17776136.docx (Word)

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Bweb Hst Ty A Asa Ihwjl Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: ready for operation (used), Functionality: fully functional, For stacking planed goods (was used after a planing system that delivered 150 m/min) Individual components 1. strip separator / cross conveyor (HIT) 2. cross transport with hook conveyor and turner (HIT) 3. separating/clamping unit (Weinig) 4. stacking machine (Sicko) 5. 2x roller conveyor TECHNICAL DETAILS Bsb Haevi Nnds Ihwowl Working height: 2.7 m Planed goods dimensions: 17 x 75 x 2,000 - 80 x 200 x 6,000 mm Package dimensions: max. 1,200 x 1,200 mm Output: 20 parts/min

Condition: used, Year of construction: 2013, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate Bweb Ha Ihjuu Shyowjl - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 20250107, input voltage: 400 V, type of input current: three-phase, total length: 2,000 mm, total height: 3,050 mm, total width: 1,900 mm, overall weight: 1,000 kg, usable height: 800 mm, maximum load weight: 700 kg, input frequency: 50 Hz, cage diameter: 1,390 mm, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, workpiece weight (max.): 700 kg, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. Bsb Ha Ijvvuzcjhwewl The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Year of construction: 2012, Condition: excellent (used), Kallfass stacking plant Bwjb Ha Ihohgh Ndjwol

Year of construction: 2024, Condition: as good as new (ex-display), Weinig Stacker for long boards Min length 1500mm Max Length 6000mm Machine is under total rebuilding and will be like new. All hydraulic Systems are changed to Electric motors New control panel sand blasted and repainted. Bweb Hajunaw Ns Ihwsl Machine comes with brick stacking option Work in progress New photos as i get along.

Condition: excellent (used), TURNING DEVICE FOR PANELS (FROM CROSSWISE TO LENGTHWISE) Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) Bwjb Ha Ihofi Tmtowel To turn at 90° panels (workpieces) from cross sense (cross-wise) to longitudinal sense (length-wise) Built-in electric and command panel 1st Table (crosswise) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (lengthwise) with motorized rollers Min dimensions of the panels (mm) 250 x 320 (ca.) Max dimensions of the panels (mm) 1300 x 2100 (ca.) Min/Max thickness of the panels mm 10 / 50 (ca.) Total installed motor power Kw 3,5 (ca.) Total length of the machine mm 3300

Condition: used, Inclined elevator Bsb Heq Edyrsa Ihwowl Lift for the 1st floor transport boards to 1 storey height

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Bob Hefi Trisa Ihwewl Built-in electric cabinet and command panel Total installed motor power KW 3,5 (ca.) 1st table (longitudinal) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd table (cross) with motorized rollers Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 2100 (ca.) Min/Max thickness of the panel mm 10 / 50 (ca.) Total length mm 5680

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Bjb Hod Rg Dzsa Ihwjwl Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (SINGLE-CAGE) Vacuum system with its pump Bobsd Tywgj Ha Ihwjwl Top holding bar deplacement (pivoting) of 180° Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting In-side lifting table, surface with motorized-rollers Front-side sliding door (metal grid) to introduce the stack of the panels Separated electric and command panel Outside rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), Working capacity (cycles/min): 12-15 Min/Max panels thickness mm 10 - 40 Min dimensions of the panels mm 250 x 320 (estimated) Max dimensions of the panels mm 1200 x 3000 Total installed motor power KW 11

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader Bob Ha Ihod Tyvxewewl - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Bwsb Hajgvpn Ij Ihwsl Separate electric and command panel Total installed motor power Kw 4,3