Used Kontron 325 for sale (841)

Condition: like new (used), functionality: fully functional, power: 122 kW (165.87 HP), Year of construction: 2018, operating hours: 3,800 h, Equipment: air conditioning, * 3,800 hours * Mono boom * Blade support * Air conditioning * Camera system * Fully hydraulic quick coupler Oilquick OQ70/55 * Central lubrication system * Engine power 122 kW * Operating weight 25,000 kg Ibjdpezdn Sysfx Afheb * 1 x deep dig bucket * As-new condition

Condition: ready for operation (used), Heidenhain UM 112 inverter, ID: 325 001-02, serial number: 10775502A – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective unit must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €1000 (including VAT) will be applied. Ibsdjzv Hrcjpfx Afheb Attention: You are bidding on a Heidenhain UM 112 inverter, ID 325 001-02, serial number 10775502A, as part of an exchange service. It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective unit must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €1000 (including VAT) will be issued.

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Iodpezvbxwofx Afhsbb Product ejector (right) Knife cover Bowl cover Automatic lubrication Loader for Eurobins 200L (left) Weight: ± 5.390 kg Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) Ibsdpfszrd Dhox Afhjb 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503

Condition: used, Year of construction: 1991, Number of shelves: 10, three-phase mains connection: 380V, N/PE, frequency: 50Hz, duty cycle: 40%, supply fuse rating: 6A, rated power consumption: 1500W, an on-site inspection is possible. Ibedpezzqcisfx Afhob

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. for sale brand new dryer old stock (2019) includes two brand new filters. capacity : 324 M3/H height : 1285 mm Ibodpfx Afeu Rpg Tehjb width : 620 mm depth : 571 mm weight: 165 kg connection: 1" 1/2 tested and ready for use.

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 21700 € 416.64 € Doppelsäulenführung 4900 x 3,4 x 1,1 mm 15 - 120 m/min 325 mm 320 mm 400 x 320 mm rund 280 mm, rechteck 240 Ijdpfx Afsz Afcgohsbb rund 180 mm, rechteck 180 650 mm 0.55 kW 3 kW 0.12 kW 2425 mm 1050 mm 1600 mm 1250 kg Linear guides Sensitive cutting pressure control Bi-metal saw blade (34 mm) Coolant system Thermal overload protection Hydraulic-mechanical blade tensioning Saw blade brush Hydraulic clamping of the vise Optical height adjustment Heavy-duty gearbox Band inclined at 2° Infinitely variable cutting speed Digital display for miter angle Hydraulic locking of the miter adjustment

Condition: used, Year of construction: 1989, operating hours: 1,061 h, Type of fuel: Diesel Colour: Yellow Empty weight: 3.840 kg Dimensions (LxBxH): 260 x 113 x 215 cm Lifting capacity: 2.500 kg Lift height: 325 cm Fork dimensions: 1.290 x 1.020 mm Ibjdpfx Asyu Ip Ujfhob - Year: 1989 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: A177B3548K - Operating hours: 1061 - Lifting capacity: 2500kg - Lifting height: 3250mm - Overhead clearance: 2130mm - Free lift: 0mm - Fork length: 1290mm - Maximum fork width: 1020mm - Minimum fork width: 270mm - Number of wheels: 4 Wheels - Attachment: 3rd valve to fork carriage - Options: Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Isuzu - Transport dimensions: 2600mm x 1130mm x 2150mm (l x w x h) - Transport weight [kg]: 3840kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Iedpfov Tp D Hox Afhsbb Weight 1250 kg Good condition

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 2132 5x, functionality: fully functional, operating hours: 150 h, number of slots in tool magazine: 12, total length: 3,200 mm, total width: 2,070 mm, overall weight: 10,000 kg, For sale: AES Ultra Raptor 2132 – 5-axis CNC machining center We are selling an AES Ultra Raptor 2132 CNC machining center, a top-of-the-line machine for processing wood, MDF, particleboard, compact panels, and other panel materials. Features: ✔ 5-axis machining ✔ Working area: 3000 x 2100 mm Ibsdpfx Afszzzbcohob ✔ Automatic tool changer ✔ Nesting table with vacuum clamping ✔ High precision and productivity ✔ Suitable for the production of furniture, stairs, doors, kitchens, and other custom-made products The machine is in excellent condition and ready for operation. Price: €75,000 + VAT For more information, photos, or to arrange a machine inspection, please contact us.

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Ibedpfxezb Il No Afhsb Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Isdpfxjzrd Nqj Afhebb Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: used, functionality: fully functional, machine/vehicle number: 91138631, Year of construction: 2019, operating hours: 11,602 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,450 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,150 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138631 Load centre: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery type: Lithium-ion Iodpfjztt S Djx Afhebb Description: Newly serviced and UVV inspected Sideshifter, fork positioner, Scale, safety light, Fork camera, lift height indicator

Condition: used, functionality: fully functional, machine/vehicle number: 91138630, Year of construction: 2019, operating hours: 12,607 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,400 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138630 Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery type: Lithium-ion Description: Maintenance performed + safety inspection completed Side shifter, fork positioner, Weighing scale, safety light, Fork camera, lift height indicator Ibodpfeztt S Rsx Afhjb

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Ibedpfxsy E Uk Is Afheb Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2018, ----Construction: Caterpillar sorting grapple type 522-5887, volume 0.9 m³, year of manufacture 2018, weight: 2,073 kg. I.D.-Plate model 226-4127, type CW20/CW30/CW40, year of manufacture 2018, weight: 141.2 kg Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice). Ibsdpfjqrltrox Afheb

Condition: used, Used Winkworth model PV63-25 approximately 63 litre stainless steel process vessel. Unit has a flat top with half hinged lid and welded dished bottom head and includes pneumatically operated raise and lower mechanism. Unit measures approximately 600mm diameter x 450mm straight side. External stainless steel jacket rated 3.5 bar design pressure at 200 deg.c. Unit has a top entry stainless steel contra rotating gate type paddle agitator driven by 1.1kW geared-motor producing 33.6rpm and a 0.75kW geared-motor producing 76.4rpm . Unit has a bottom entry offset Silverson BE275 homogeniser with a square hole disintegrating head driven by a 0.75kW motor. Unit has a local control panel and is mounted on a stand with (4) legs. Iodpsymayvsfx Afhobb

Year of construction: 2008, condition: good (used), This extruder line from Kuhne is in machine storage at Plastima Used Machinery. The machine is from 2008 and in excellent condition. Ibsdpfx Afsyxn T Nehsb Brand: Kuhne GmbH Model: K 60E - 33D Screw type: single screw Year of construction: 2008 Screw diameter Ø: 600 mm L/D ratio: 33 Cylinder height: 425 mm Cone height: 325 mm Total height: 750 mm

Year of construction: 1988, condition: ready for operation (used), A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible. Ijdpeyypl Asfx Afhjbb

Condition: good (used), functionality: fully functional, 1 x multi-spindle automatic lathe Traub TD 26 Iedez Agyaepfx Afhsbb with boring unit + tool magazine Iemca AS 325/32 CT Year of manufacture: 1992 + chip conveyor The machine can be inspected while powered on.

Condition: used, Year of construction: 2018, ----Construction: Caterpillar sorting grapple type 522-5887, volume 0.9 m³, year of manufacture 2018, weight: 2,073 kg. I.D.-Plate model 226-4127, type CW20/CW30/CW40, year of manufacture 2018, weight: 141.2 kg Ibedpjqw S D Tjfx Afhjb Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Ibjdpfexp Iyhsx Afhob Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist.

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 with refrigerated dryer Features and Technical Specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank volume: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage - Dimensions: 750x705x1800 mm - Weight: 170 kg With DK 985 Eco refrigeration dryer: - Airflow at pressure dew point 3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: available shortly Iedpfjzk Nqkox Afhobb Storage location: DE-63934 Röllbach

Condition: like new (used), Year of construction: 2003, operating hours: 2,032 h, Cold Jet PPAH-325B Dry Ice Pelletizer / Dry Ice Production Machine The machine is available from December. Cold Jet PPAH-325B – Industrial Dry Ice Production Machine Professional industrial equipment designed for the production of dry ice. The machine is built as a heavy-duty industrial unit with an integrated hydraulic system, control panel, and CO₂ pressure monitoring. Machine details: Manufacturer: Cold Jet Model: PPAH-325B Application: Dry ice production Operating hours: 2,032.8 hours Integrated hydraulic power unit Electronic HMI/control panel Emergency stop Hydraulic pressure monitoring Chamber pressure monitoring Injection pressure monitoring Iodpfxjz Adwio Afhsbb Vapor CO₂ pressure monitoring Liquid CO₂ pressure monitoring Separate vapor and liquid CO₂ controls Heavy-duty industrial steel frame The machine is currently located in the Netherlands. The PPAH-325B is a professional industrial machine suitable for companies involved in dry ice production and applications requiring their own dry ice supply. Worldwide delivery can be arranged. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: ready for operation (used), Heidenhain UM 114 ID 325 005-12 SN15160246, used, in good condition, 100% functional, delivery as per photos, professionally fully overhauled and tested with 3 months' warranty, 100% functional, delivery as per photos. Ibodex Etdgspfx Afhob