Used Leybold Dk 100 for sale (24,100)

Condition: ready for operation (used), Leybold DIVAC 1.2L 200V~ diaphragm pump, serial number: 10031461, used, in good condition, 100% functional, scope of delivery as per photos. Nedpfjx Et Hbsx Ahzoct

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG model DKUN 1-100 K V1 F4 Serial No. 61801899 Year of manufacture: 1997 Load capacity: 100 kg Hook path: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control pendant cable length: approx. 1.7 meters Mains connection: 400 Volt, 50 Hz Nsdpfjhtr Eyex Ahzect 1 chain fall = 100 kg Net weight: 16.5 kg Good condition

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz Njdpfx Asu Swb Ushzjct 1 load strand = 100 kg Net weight: 16.5 kg Good condition

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Ncedpfx Asrhzh Sohzet Shipping by courier or collection only by appointment

Condition: like new (used), Leybold wsu1001 Ncjdpfjd Sz Diex Ahzet

Condition: excellent (used), Standard boiler Duisburg 10000kg/h 15,7 Bar +Weishaupt gas burner. Already dismantled ,Ready for collection Njdjnwit Sepfx Ahzsct

Condition: new, Year of construction: 2024, Roots booster vacuum pump. Available in stock. Marpa Vacuum brand pump. Pump completely new. 12 months warranty Ncedpfx Aofk Si Sohzet Nominal flow: 500 m3/h at 50Hz. Final vacuum: 3x10^-4 mbar Any clarification, do not hesitate to contact us.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... Nedpfx Ahsy Uhu Eezoct We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Ncsdpforivxcex Ahzjt Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Ncodpfx Ahjxt Hn Sezet Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, Technical details: number of controlled axis: 6 workpiece weight: 20 t operating time: 4290 h control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. Ncsdpju Nwfbofx Ahzet *

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 610 mm, spindle bore: 130 mm, turning diameter: 1,000 mm, center height: 500 mm, turning length: 3,000 mm, quill diameter: 160 mm, quill travel distance: 300 mm, total length: 6,350 mm, total width: 2,190 mm, total height: 1,810 mm, spindle speed (max.): 315 rpm, spindle speed (min.): 3 rpm, swing diameter over cross slide: 610 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, metric thread steps: 44, bed width: 755 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, Maximum turning diameter: 500 mm Distance between centers: 3000 mm Bed width: 755 mm Diameter of swing over bed: 1000 mm Diameter of swing over carriage: 610 mm Spindle bore: 130 mm Spindle nose: D1-15/Short taper 15 Spindle speed range: 3.15 - 315 rpm (21 steps) Longitudinal feed range: 0.1 - 12 mm/rev, 57 steps Ncodpfx Ahoy S Rqdszet Cross feed range: 0.05 - 6 mm/rev, 57 steps Rapid traverse rate longitudinal/cross: 3700/1850 mm/min Metric threads: 1 - 120 mm, 44 steps Inch threads: 3/8 - 28 TPI, 31 steps Module threads: 0.5 - 60 mm, 45 steps Diametral threads: 1 - 56 DP, 38 steps Tailstock quill diameter: 160 mm Quill mounting: MK 6 Quill travel: 300 mm Motor power: 22 kW Weight: 14,400.00 kg Dimensions: 6350 x 2190 x 1810 mm

Condition: excellent (used), Complete, professional HOLEX tool holder for sale, designed for micro-drilling and precision machining. Technical specification: • Manufacturer: HOLEX • Reference: 300520 16 • Model: SK 40-1/10-100 • Length: 100 mm • Collet: ER16 with HOLEX nut (marking G 6.3 / 15,000 rpm visible) • Spindle: SK40 • Max torque: 70 Nm Nodow Rd Swepfx Ahzjct • Balancing: G 6.3 / 12,000 rpm • Year: 11/10 • Included: micro drill – mounted and ready for operation Very good technical condition – the collet holds securely, drill is undamaged. Ideal tool for highly precise operations in electronics, medical, or toolmaking applications. Shipping or personal pickup available.

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Ncodjw Sy D Espfx Ahzst

Condition: excellent (used), Very good condition, precision holder from the renowned brand WNT, made in Germany. Equipped with Centro-P HPC16 bush, ensuring high runout accuracy and stable tool clamping. A solid carbide VHM end mill for precision machining is mounted on the holder. Total length A=100, SK40 mounting type (DIN 69871 AD). Premium-class equipment, ready for work on CNC machining centres. Nsdpfsw Rrzmjx Ahzect

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Nsdsxcgygepfx Ahzoct

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Njdpfx Ahoxl Rgijzjct

Condition: excellent (used), Year of construction: 2024, For sale: Professional water treatment and preparation unit – UWS Heaty Profiline 100 No 2. This is a mobile device designed for use in heating systems, water installations, and HVAC service. Perfect for flushing, filling, and treating installations. Equipment is in excellent technical condition, fully complete and ready for operation. ⚙️ Technical data: Manufacturer: UWS Technologie GmbH Model: Heaty Profiline 100 No 2 Ncodpfxsyz Dhzj Ahzet Year of manufacture: 2024 Power supply: 230 V / 50–60 Hz Power: 0.5 kW Weight: approx. 59 kg Max. operating temperature: 80°C Max. pressure: 6 bar 🔧 Equipment features: - Integrated tank - High-quality EBARA pump - Flow meters - Pressure gauges - Control valves - Mobile transport trolley - Documentation and accessories (as seen in the photos) 🔍 Condition: - Used device - Very good technical condition - Minor, normal signs of use - Fully complete ⚠️ Remarks: - One pressure gauge has a damaged housing/cover (visible in the photos) - Operation of this pressure gauge has not been checked - The part can be easily replaced if needed 📦 Applications: - Heating installations - Water installations - Service and cleaning of installations - HVAC systems 🚚 Delivery: - Pallet shipping available - Collection in person possible

Condition: good (used), Technical data for pallet rack beams: Racking system: META Thyssen Included in delivery: 01x pallet rack beam, used Color: yellow Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 3 HK (hooks) Clear width: 3,600 mm 02x safety pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting Nodoy Akh Rjpfx Ahzoct Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on place of delivery or scope of order.

Condition: good (used), functionality: fully functional, UDKP100 Multi-Blade Circular Saw - 37kW motor power - Max. cutting height: 100mm - Max. cutting width: 300mm - Max. working width: 450mm - Saw blade diameter: 250-300-350mm Ncsdpfxsxbruts Ahzjt - Working speed: 40m/min - Chain conveyor feed - Manual saw blade height adjustment - Extra thick steel frame, shaft made of specially alloyed, hardened and ground steel - Manual blade height adjustment depending on the selected saw blade diameter - Large set of spacer rings included - Price ex location Hungary Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: excellent (used), Professional industrial chamfering and deburring bench machine from the renowned German manufacturer deNegro, in cooperation with Hahn & Kolb Stuttgart. This device is designed for chamfering, deburring, and edge processing of metal parts. The robust, heavy-duty workshop construction ensures stable and precise operation. The machine features an adjustable guide and a two-speed rotational switch. It is an ideal solution for locksmith workshops, toolrooms, and production environments. Condition: Used. The machine is in good working order and shows normal signs of use as visible in the photos. Technical specifications: Manufacturer: deNegro Distributor: Hahn & Kolb Stuttgart Model: DK 40-42 Power supply: 380V Power: 0.26 / 0.37 kW Speed: 1,400 / 2,800 rpm Frequency: 50 Hz Protection class: IP54 2-speed switch Adjustable guide Stable steel worktop 16A industrial power plug Applications: - Chamfering edges - Deburring metal parts - Machining steel components Ncjdpfsy Swlhsx Ahzet - Locksmith workshops - Toolrooms - Production and maintenance

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Nedpfsy Rrhbjx Ahzjct Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: new, Year of construction: 2023, functionality: fully functional, Leybold Turbovac 90 i IS / DN 63 CF 811041V1000 Nodow I Rt Aopfx Ahzsct

Condition: good (used), Vecoplan 100 Ncsdpfx Ahoy Srxcezet

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Ncedpfx Asy Tu T Sjhzjt Year of manufacture: 2009. Sturdy construction ensures precise operation. Interchangeable blades. Adjustable margins. One set of blades included. Compressed air powered.