Used Mbo Folding Unit 3. Station Selfcontrol for sale (81,803)

Condition: good (used), machine/vehicle number: X02/22, Folding machine MBO T530-1-53/4 F, 4 folding pockets, counter, compressor, second folding unit with 4 pockets, 1 knife, machine number X02/22, in good condition, immediately available. WITHOUT DELIVERY. If interested, we will gladly provide information on additional machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Kodoxdhv Eepfx Ah Dsdr

Condition: ready for operation (used), MBO Folding Machines Kodpfoir A Imex Ah Dedr MBO ET46 bump turn -1983

Condition: good (used), WSM Stationary Screwing Unit Assembly and testing of components for car radios and navigation systems. The assembly station is enclosed in a protective housing. The service doors are equipped with monitoring switches with interlocks. The doors are locked during automatic operation and can only be opened during automatic stop or manually after pressing the "Doors" button on the control panel. Automatic operation cannot be started with a door open. Operational Sequence The station is loaded with the pre-assembled component via the transfer belt. The following describes the operation steps of the automatic station with a transfer belt. In normal operation, all three stations operate in parallel. - Positioning the test unit (WT) with the pre-assembled module in station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the test unit onto the conveyor belt Kdjdpfx Aoibicheh Der - Positioning the test unit (WT) with the pre-assembled module in station 2.2 - Positioning the screwdriver and screwing the front PCB in place - Lowering the test unit (WT) onto the conveyor belt - Positioning the test unit (WT) with the pre-assembled module in station 2.3 - Lowering the light shield and making contacts, adjusting the carrier with the test sensors from below - Type-dependent testing of the SD + CD slot lighting and buttons - Functional test of the CD eject button - Lowering the test unit (WT) onto the conveyor belt > continue If errors occur during testing, they are displayed on the screen. and can be repaired if possible. For this, the system is switched to manual operation and the doors are opened. After the repair and restarting the automatic system, the workpiece carrier is tested again in the station. If a repair is not possible (e.g., due to a screw error), the workpiece carrier is marked as NIO (Not Okay) in the control system and is not processed further. Manual NIO marking and rejection is also possible. Financing through our bank is also available. komplett-konzept.leasingo.de More assembly stations, new and used, can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment: compressor, documentation/manual, Folding machine MBO T540 Kjdpfx Ahjzrvkyo Dodr Year of manufacture: 2004 Shingle delivery

Condition: good (used), MBO T535E/4F Folding Machine + Mobile Delivery Machine in very good condition, ready for production. From the first owner. Minimum paper size: 105 x 150 mm Maximum paper size: 530 x 840 mm High pile feeding Kedpfszgddqox Ah Djdr Equipment: MBO T535E-1-53/4-F unit (4 cassettes) Cassette and compressor sound insulation Electronic counter with batching Electric mobile delivery Documentation Tool kit and accessories.

Condition: ready for operation (used), Round pile feeder MC Digital control Kdedpfx Ajq Ik Rujh Dor 1st unit 6 plates 2nd unit 4 plates A76 stream delivery

Condition: used, functionality: limited functionality, Machine Package – 5 Post-Press Processing Machines in a Bundle Complete package for only €3,000.00 net For sale is a machine package from post-press processing. The machines are sold exclusively as a bundle and are ideally suited as a source of spare parts, for workshops, collectors, or for further use after appropriate inspection. Included in the scope of delivery: Folding machine Manufacturer: MBO Kdsdpfxeznvlvj Ah Djr Type: T500-1-500/4F Wiring diagram: 35.1901.14 Machine number: N07/09 Stack delivery system Manufacturer: Multinak Type: S Machine number: 2151000 / 893025 Banding machine Manufacturer: Band-All Type: 32 Machine number: 659847 Gathering machine (8 stations) with stitching unit Manufacturer: TB Sprint Type: 303 CS Machine number: 303 CS 2816 Chase A4 Manufacturer: Heidelberger Price: €3,000.00 net for the complete machine package. Inspection possible by appointment. Loading and transport are the responsibility of the buyer. We will gladly send additional information or photos upon request. Private sale excluded. Sale is ex-warehouse. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Kdedsv Hqnajpfx Ah Der Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 1991, condition: excellent (used), machine/vehicle number: 61861201, Flatpile, Vaculift, Vacubelt, DV Pump, Shingle belt delivery, MCC1 counter Machine nr: 61861201 Kdjdpfx Ashqhg Ash Der

Condition: ready for operation (used), Year of construction: 1999, Herzog Heymann small folding machine KL112 – 1250, year of manufacture 1999 Flat pile feeder, shingled, 176–646, station with 6 pockets Cold glue unit HHS C210 with one glue head Kodpfxexlu Tys Ah Dodr 6 segmented folding rollers The second station is not available!

Condition: used, Year of construction: 2012, Year: 2012/2013 Condition: dobrý Available: Q1 2026 (february) Kdjdpox Em Avefx Ah Dsr Configuration: - MBO RBF 520 buffer unit - MBO SVC 521C slitting + cutting unit - MBO DFT 560/6 folding unit - 6 buckles - automatic setup - folding rollers - automatic setup - slitter shaft casette - MBO ASP 66 - shingle delivery + pressing unit - MBO X - FW 50 - mobile knife unit

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph Kodpfx Aszvlk Deh Dsdr

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Kdjdexyhnyspfx Ah Der Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: ready for operation (used), Folding machine MBO T 460, feeder, 4 folding stations, 1 cross folding station, jogger, counter, standard accessories, in good condition. If you are interested, we will be happy to provide you with information about other machines available in our facility. You are welcome to inspect the machine at our facility after prior arrangement. Kedpfx Aozvf D Dsh Djdr

Condition: good (used), Just Normlicht Proof Control Station Kjdjztn Uajpfx Ah Dedr Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity).

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 66000102, Pallet feeder, Vaculift, Vacubelt, DV Pump, MBO MPC Control, ASP 66 Shingle belt press delivery Machine nr: 66000102 Ksdohqhgqepfx Ah Djdr

Condition: ready for operation (used), Year of construction: 2007, Technical specifications: 4 pocket folds. Kodpslfgcwsfx Ah Dedr

Condition: used, Year of construction: 2006, MBO T530 Folding Machine 4 plus 4 cassettes with knife Max. Paper Size: ~53 x 84 cm (or 530 x 840 mm) Min. Paper Size: ~14 x 15 cm (or 140 x 150 mm) Paper Weight/Thickness: ~35 to 250 g/m² Kjdpfx Ahsxz A Abs Dedr Speed: Up to 40,000 cycles/hour (depending on job) or max 230 m/min

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, LANG Embossing Station 52610 for Macro-Grip® Clamping Technology Offered is a LANG embossing station, type 52610, for preparing raw parts for the proven Macro-Grip® clamping system from LANG Technik. The embossing station enables the embossing of the clamping contour into raw materials, thus ensuring a positive, process-reliable workpiece clamping during 5-axis machining. Equipment: Manufacturer: LANG Technik Type: 52610, older version Embossing station for Macro-Grip® clamping technology Positive pre-embossing of raw parts High process reliability during machining Robust industrial design Simple and fast operation Kdjdpfx Aezu Imfsh Djr Advantages: Maximum holding forces with low clamping height Optimal accessibility for 5-axis machining Reduction of vibrations and workpiece movements Fast and reproducible workpiece preparation Ideal for raw materials in single-part and series production Application areas: CNC machining centers Tool and mold making Job manufacturing Single-part and series production 5-axis machining of raw parts Used, fully functional. Normal signs of wear and tear corresponding to age and use. Scope of delivery: LANG embossing station with clamping jaws Accessories according to photos or upon inspection Inspection and functional test possible by arrangement. Shipping or pickup by agreement.

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Kdodpfemck Ryjx Ah Dor Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Offer without obligation 1) Combi folding machine Make: MBO Type: K 800.2 S-KTL-Aut. Size: 78 x 120 cm Year: 2009 Equipment: - Automatic combi folding machine MBO K 800.2 -.S -KTL. - pallet feeder K8 - FP120 - VACULIFT separation head Kdodpfx Ahsy I Txve Der - loading of feeder from 2 sides possible - feeder pile-height 120 cm - VIVAS special sheet infeed- and alignment system - 1. fold-unit = 4 combiplates (stainless steel) - rear located knife shafts- - KTL- crossfold unit with 2 pneumatic driven high-speed fold-knifes - 1 laying buckle after 1. knife - rear located knife shafts after laying buckle - automatic pocket- and switch blade adjustment - NAVIGATOR -Control with Touchscreen for all functions, settings and presetting-functions - RAPIDSET-basecontrol incl. motorizing of all combi fold pockets - noise hoods and guards on parallel- and cross-fold. - approved and maintenance free, economical and silent belt drive - Palamides Alpa 500 delivery. - special compressor ! - accessories, techn. documentation - machine in excellent condition ! Price under request more pictures and video are available,

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm – maximum working width 52cm – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed Kodpsx Hbkdofx Ah Dedr

Condition: good (used), MBO T500F Folding Machine Machine in very good condition, ready to work. Kdodpfxjzrfdcj Ah Dsr Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 720 mm High stack feeding 4 cassettes with micro-adjustment and cutting Casket and compressor noise reduction Electronic counter with batching Electric delivery Machine in very good condition, ready to work.

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar Kdedpfx Asycck Ajh Dor -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: ABB ASEA, double hydraulic unit -Hydraulic pump 1: Motor ABB 3 kW 150 bar -Flow rate: 15 l/min, with pressure switch, pressure accumulator and filter Ksdpfx Ahewxr N Io Dedr -Hydraulic pump 2: ASEA motor 0.37 kw / 100 bar / 0.8 l/min -Hydraulic tank: with temperature/level indicator -Individual components: see photos -Dimensions: 785/570/H785 mm -Weight: 203 kg