Used Merz Pm 4 for sale (59,288)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table Fgjdpfx Aljyuuzde Soh • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Fjdpfjiknv Eox Al Sjgh

Condition: used, Manufacturer: Hanovia UV Model: PMS150G4/4 Type : Ultraviolet disinfection system Application: Ultraviolet (UV) water/liquid treatment Pressure rating: 7 bar Maximum pressure loss: 0.15 bar Fgedpsx R A Ilsfx Al Seh Maximum flow rate: 133 L / min - 8 m3/hour Temperature: 80°C

Condition: used, Year of construction: 1993, pressing force: 160 t, Press brake used Make: BBM Model: AP ME 160-40 year of construction 1993 Fgjdpfx Astufbnjl Soh Pressure capacity 160 to. folding length 4050 mm Table width 190 mm Stroke 250 mm throat 315 mm Equipment CNC control Swivel operation at the front right CNC backgauge (X-axis) CNC electric depth adjustment Manually adjustable stop fingers adjustable table crowning, by crank Rear and side guards 3 front support arms Double foot switch Accessories: 2 Multi-V-matrices as well as 1 brand. Deer foot stamp

Condition: ready for operation (used), Year of construction: 2001, A sachet machine (fully automatic form, fill and sealing machine) Merz for the chemical-pharmaceutical industry is available. Sachet seal edge sides: 3/4, lanes: 2, max. film roll width: 480mm, max. film roll diameter: 500mm, film core diameter: 70mm/76mm, mounted sachet format X/Y: 110mm/70mm, bag width range: 15mm-160mm, bag length range: 15mm-200mm, max. cycle rate: 100/min, production output: 200sachets/min, filling volume range: 0.2ml-250ml, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Fgodpoy N Uw Asfx Al Sjh

Condition: new, Year of construction: 2011, Storage number: 100105849 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Merz distribution box M-SVG63/001/0/K/FU Portable socket distribution box Input with 63 A For consumers with frequency converters 2 units available in Nuremberg, year of manufacture 2012 1 unit available in Schweinfurt, year of manufacture 2014 Merz distribution box M-SVG63/001/0/K/FU/4M with 4 m connection cable 10 units available in Nuremberg, year of manufacture 2009, 2016, 2017, 2018 Fgedpjzk Acyefx Al Ssh

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window Fodjxz Ab Rjpfx Al Sjgh - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: excellent (used), functionality: fully functional, mileage: 950,000 km, first registration: 04/2014, fuel type: diesel, overall weight: 32,000 kg, brakes: intarder, emission class: euro6, total length: 10,950 mm, Year of construction: 2014, Equipment: ABS, air conditioning, airbag, differential lock, full service history, MAN TGS 35-480 PM 24 PX crane with 4 hydraulic outriggers + radio remote control Year: 04/2014 4 axles, 8x2 configuration Diesel engine Automatic transmission Euro 6 emission standard Wheelbase: 5,900 mm Platform length: 7,750 mm Total truck length: 10,950 mm Payload capacity: 16,100 kg Gross vehicle weight: 32,000 kg Engine: 12,419 cc (6 cylinders) Power output: 353 kW (480 hp) Rear air suspension Intarder 4th axle: steerable and liftable Suspension: 1st and 2nd axles: leaf spring; 3rd and 4th axles: air suspension Air conditioning ABS Radio Electric mirrors and windows Mileage: 950,000 km DESCRIPTION: MAN TGS 35-480 PM 24 PX crane with 4 hydraulic outriggers + radio remote control Year: 04/2014 4 axles (8x2) Diesel engine Automatic transmission Euro 6 Wheelbase: 5,900 mm Platform length: 7,750 mm Total truck length: 10,950 mm Fgsdpfoz Hvh Sex Al Sjh Payload: 16,100 kg Gross Vehicle Weight (GVW): 32,000 kg Engine: 12,419 cc (6 cylinders) Power: 353 kW (480 hp) Rear air suspension Intarder 4th axle: steerable + liftable Suspension: 1st & 2nd axles leaf-sprung; 3rd & 4th axles air suspension Air conditioning ABS Radio Electric mirrors & windows Mileage: 950,000 km

Condition: used, mileage: 272,446 km, power: 243 kW (330.39 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, gearing type: mechanical, emission class: euro4, loading space length: 7,500 mm, Equipment: ABS, Axor 2633 Manual transmission, 16 gears PM 15.5 LC crane 4 x extendable 5 + 6 functions for swivel head and grab Radio remote control 7.50-meter flatbed Leaf spring suspension French registration Excellent condition Fgjdpfoz Ab Skox Al Seh Price: €34,500 net

Condition: used, Year of construction: 2018, operating hours: 1,679 h, load capacity: 2,500 kg, fuel type: diesel, power: 25 kW (33.99 HP), gearing type: other, overall weight: 5,080 kg, empty load weight: 2,670 kg, first registration: 03/2018, maximum load weight: 2,500 kg, axle configuration: 4x4, number of seats: 1, driver cabin: other, brakes: other, Equipment: all wheel drive, pallet forks, retractable fork, * All-wheel drive forklift with all-wheel steering * Condition, see photos * Lifting height 3,040 mm Fgedpfjz Eg Uaox Al Soh * Only 1,679 operating hours * Max. load capacity 2500 kg * Kubota diesel engine 25 kW / 33 hp * Four-way steering * All wheels can be rotated for lateral movement when long loads need to be moved and/or the space is limited or only small openings are available * Side shifters * Load center of gravity 600 mm * Road lighting * Rotating beacon * Rear warning device * Comfort seat with lap belt * ROPS / FOPS driver cabin, rollover protection structure and protective structure If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Fsdeht Hllspfx Al Sjgh

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe Fedpfx Asxgukbsl Sogh - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: used, Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height settings Technical data: Planing width (finished size) min./max. 18 - 180 mm Planing height (finished size) min./max. 7 -120 mm Min. workpiece length (individual workpiece) 430 mm With group feed 250 mm Number of work spindles 4 Tool diameter of the 1st spindle 120 mm Tool diameter of spindle 2,3,4 min/max 100 mm/180 mm Feed table length 1700 mm Max. chip removal 10 mm Knife shaft speed 6000 rpm Spindle diameter 40 mm Planer head diameter 120 mm Jointing cutter diameter min./max. 120/137 mm Clamping length of vertical spindles 130 mm Clamping length of horizontal spindles 190 mm Feed speeds 6/12 m/min Feed roller diameter 120 mm Feed motor power 0.8/1.1 Kw Horizontal spindle motor power 5.5 Kw + 5.5 Kw Vertical spindle motor power 7.5 Kw Total motor output at 100% duty cycle 20 Kw Suction nozzle diameter 120 mm Minimum speed of the suction air 20 m/s Minimum volume of the suction 3200 m³/h Fedjvrvvtspfx Al Sogh Weight approx. 1300 kg Dimensions LxWxH 2950 x 1180 x 1510 mm Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg PM-QM46-1 Year 2005 - Serial-No. 965406 Bogenformat / Sheet size min. 140 mm × 89 mm - max. 340 x 460mm Druckgeschwindigekit / Printing Speed max. 10.000sh/h Dicke / Thickness 0.04 mm – 0.3 mm Dampening System DDS Autplate Fgjdpjv Ak S Rsfx Al Sjh Plus Version Streifeneinleger - Strip feeder Mediprint STR 4.1 Trockenbestäuber / Dry pollinators Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm Fjdpfx Ajttnt Iol Sogh -Weight: 9.5 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, total width: 916 mm, total length: 852 mm, total height: 593 mm, type of input current: AC, input voltage: 220 V, tool diameter: 350 mm, travel distance X-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, For sale is a Speronis brand presetting device of the type STP Magis 400 Fjdpfsvtcu Sjx Al Sogh The device is in very good condition, fully functional and ready for immediate use Technical data: Year of manufacture: 2013 Z-axis: 400 mm X-axis: 400 mm Max Ø: 350 mm Connection: 220 V Compressed air: 5-7 Mpa System weight (machine only): approx. 200 kg Dimensions: 916*852*593 mm Additional reducing sleeves are not included in the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: used, mileage: 147,000 km, power: 66 kW (89.73 HP), first registration: 03/2006, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, loading space length: 330 mm, Year of construction: 2006, Equipment: had accident, power assisted steering, The vehicle is in good condition but is not operational as the injection pump needs to be replaced. The vehicle is sold as seen, in its current state. Equipped with a rigid box body (removal van) and roof rack. VAT at 22% is excluded. Transfer of ownership costs excluded. Payload: 900 kg Fgodpfjy A T Rbsx Al Sjh Body length: 3.3 m For information, contact via WhatsApp.

Condition: ready for operation (used), Year of construction: 2008, A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Fgodpfx Alszli Tuo Ssh

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 16kVA Short circuit-current: 20,7kA Fjdpfoy Ez I Hjx Al Segh Electrode force: 65-390daN / single stroke Throat depth: 200mm --- Weld control: MPS 10 (5-times, 8-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Fsdpfxsz Nxwcj Al Ssgh Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, For sale is a comprehensive Beckhoff XPlanar planar motor system consisting of 29 XPlanar tiles and 16 XPlanar movers. The following are available in total: 29 x Tiles APS4322-0000-0000 Dimensions: approx. 240 x 240 mm 16 x Movers APM4220-0000-0000 Dimensions: approx. 113 x 113 mm Condition: Fedpfx Ajz Eu Unsl Sjgh Used, from a dismantled industrial system. Some are even new/unused. The components may show signs of wear. The complete package or individual modules can be sold.

Condition: used, empty load weight: 6,460 kg, maximum load weight: 26,540 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 07/2004, suspension: air, tire size: 385/65 22,5, tire condition: 40 %, color: red, Year of construction: 2004, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 41669 Meiller, MHKS41/2-G Fjdpfx Alsz Rip Sj Ssgh * Year of manufacture: 2004 * ABS, Anti-lock Braking System * Air suspension * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Steel tipper body * Roller cover * Suspension: Air * Gross vehicle weight: 33,000 kg * Unladen weight: 6,460 kg * Payload: 26,540 kg * Permissible gross vehicle weight: 33,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 30% - 50% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 40% - 30% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Highlight: 1-truckcom Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2000, Gathering machine / booklet making Theisen & Bonitz TB Sprint 314 flex HP with QSM 303 14 stations, manual feeder TB Sprint flex 314 HP Format (max.): 350 × 500 mm Stack height: up to 650 mm Performance: - Up to 3,300 cycles/hour in 1:1 operation - Up to 4,200 cycles/hour in 1:2 operation TB B303 QSM Stitch-fold-cutting unit Formats open max.: 35 x 50 cm Open formats min.: 6.5 x 15.5 cm Smallest brochure: 6.5 cm spine length x 4 cm with head-foot trimming: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Fjdezictpspfx Al Ssgh Output: up to 3100 work cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorized format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper

Condition: used, mileage: 100,000 km, gearing type: mechanical, emission class: euro3, Year of construction: 2004, Year of manufacture: 2004 Fgodpfez Hz Ukox Al Seh

Condition: new, pressing force: 60 t, Equipment: CE marking, documentation/manual, – Capacity 60 tons – Cylinder stroke 250 mm – Working width 1040 mm – 2 speeds – With V-blocks/pressure plates – Pressure gauge – Emergency stop Fodpfxowgy Rcs Al Segh – Documentation – 400 V