Used Bona Edge for sale (5,009)

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3670-09-020, overall weight: 1,080 kg, total length: 1,493 mm, total width: 835 mm, total height: 1,719 mm, input voltage: 230 V, type of input current: DC, input frequency: 50 Hz, protection type (IP code): IP65, year of last overhaul: 2021, warranty duration: 36 months, SM-200-SA fabric bonding machine with fixed welding head. Gkedpfx Agowlhnme Nec

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 14,000 mm, total length: 17,420 mm, total width: 14,000 mm, total height: 4,850 mm, overall weight: 37,000 kg, New scalping screen available from stock. Edge S18 Dual Power. See brochure with all (technical) details. Gkodov A S Nkepfx Ag Nsc Shaking sieve, scalping screen, vorsieb

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Gedpfxjv Aailj Ag Nekc

Year of construction: 2023, operating hours: 1,200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 23TRT620048, EDGE TRT 620 demo machine - Immediately available Year of construction: 2023 Hours: 1050 Equipped with the following options: Gksdpfxsv Ewz Rs Ag Nec - Remote control - Magnetic belt on the fine fraction - Load control on the bunker belt - Fine fraction belt 180 degrees rotatable - Reversing fan Drum screen / drum screen / drum sieve

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift truck Condition: As good as new Technical condition: New Gsdpfx Aevzzl Eog Nskc Front tires type: Polyurethane Rear tires type: Polyurethane Support rollers, lithium-ion battery, 12 month guarantee

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Gksdexf Ewvopfx Ag Nec Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT Gedpfx Asxg Ix Seg Njkc - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Gkedpfxoxhgk Aj Ag Nsc Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: used, Year of construction: 2010, total length: 5,250 mm, total height: 1,780 mm, total width: 1,060 mm, Weight: 1.500 kg Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes Gkodpfswp D Udsx Ag Nsc - Serial number: 1969 - Transport dimensions: 5250mm x 1060mm x 1780mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Available now: a high-performance Holz-Her 1308XL Edge Bander, manufactured in 2020 and maintained to a very high standard. This compact, powerful machine is perfect for shops looking for professional edgebanding results with maximum efficiency and precision. Machine Details: Make/Model: Holz-Her 1308XL Year: 2020 Condition: Excellent – low hours, clean, and well-maintained Gkodpfx Ajxlcfqsg Nec Usage: Light commercial – ideal for joinery and cabinetry work Location: [Insert location] Availability: Immediate Key Features: Glu Jet system for PUR & EVA application Pre-milling unit for perfect edge prep Corner rounding for seamless finishes Touchscreen control panel with intuitive interface Fast heat-up time and energy-efficient operation Compact footprint with high-end capabilities This model offers professional-grade edge quality, ideal for kitchens, furniture, and interior fit-out production. Holz-Her’s build quality and user-friendly controls make this a standout choice for serious workshops.

Condition: good (used), Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Unit: from edge banding machine BRANDT KM 35 -Engine. Groschopp 0.25 kW / 2800 rpm -Individual components: see photos -Dimension total. 590/360 / H330 mm -Total weight: 30 kg Gksdpfx Agogy T I Ne Nsc

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Gedpfx Agotpn Eto Nekc Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Year of construction: 1985, condition: excellent (used), Edge gluing press for veneer, solid wood and plastic, model HFK 2200, for trimming edges during press time. When using heat-curing glue, we achieve pressing times of 20 to 30 seconds for veneer edges. Maximum working size approx.: 1,400 x 2,500 mm Heating: 1.7 kW Electro-pneumatic edge press Haug HFK 2200 for pressing edging material onto wood, with heating. 3 table extensions Gkjdew Apqqspfx Ag Noc Swiveling work table Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Digital 3D edge finder MarTest 802 EW Working ranges X, Y, Z axis: - 2 to 4 mm Godpfx Aeqff Rmjg Nekc iffernschrittwert_mm: 0.005

Condition: used, Year of construction: 2008, total length: 7,500 mm, total height: 1,800 mm, total width: 970 mm, Weight: 5.500 kg Gksdpfx Agjxakluj Njc - Number of units [pcs]: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue unit - 3rd unit type: Cap unit - 4th unit type: Rough milling unit - 5th unit type: Rough milling unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit - 8th unit type: Brushing unit - Tools available: Yes - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: - Voltage [V]: 400 - Current consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 7500mm x 970mm x 1800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, Edge Banding Machine Built in 1998 At 5500 mm long, the Quadromat is the shortest edge banding machine available. With its integrated workpiece return, it enables complete processing of edge materials. Not only are the long edges milled within the machine, but the front edges are also copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating manual rework. With PLC control with up to 20 processing programs Workpiece Dimensions Minimum width 60-80 mm (depending on the edge material) Gjdpfx Agjwkba Tj Nskc Minimum length 150 mm Workpiece thickness 10-50 mm Edge band thickness 0.4-12 mm Minimum edge band length 400 mm Feed rate 18 m/min. With 2 jointing motors With multifunctional milling unit (flush, bevel, radius) With scraper With miter saw With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection 7-10 bar Extraction connection 160 mm Weight approx. 2400 kg Availability: Short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Gedpfx Agsw Sn I Es Nekc Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.”

Condition: used, Year of construction: 2007, total length: 5,200 mm, total height: 1,600 mm, total width: 1,200 mm, Weight: 1.550 kg Price: On request - Year: 2007 - Documentation available: No - Serial number: 1328 - Transport dimensions: 5200mm x 1200mm x 1600mm (l x w x h) Gksdpfx Aow Rd Tzeg Noc - Transport weight [kg]: 1550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - Serial number: 70239 Financial information VAT: The price shown is exclusive of VAT Gkedpfx Aswp Dl Nsg Noc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2010, Double Belt Sander Holytek PW 12 H Year of construction 2010 OscillatingMin/max working width 180/1200mm Min/max working thickness 10/250mm Sanding belt size 3730x270mm 2x Engine 7.5 HP Gksdpfewnhuxex Ag Nec Machine dimensions 2500x2250x1700mm, weight 1500kg - Year: 2010 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, total length: 4,800 mm, total height: 1,700 mm, total width: 900 mm, Weight: 1.250 kg Price: On request Edgebander Serial number: 200.04.007.13 400V 11kW 3PH 50HZ 28A multifunction trimming unit Glue unit Workpiece height 8-60mm - Year: 2013 - Documentation available: No - Serial number: 200.04.007.13 - Transport dimensions: 4800mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1250kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Gksdpfx Ajwlv D Nsg Njc

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Price: On request Gkjdjxlqpdjpfx Ag Nsc - Year: 2001 - Documentation available: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 4,350 mm, total height: 1,600 mm, total width: 900 mm, Weight: 1.850 kg - Documentation available: No - Transport dimensions: 4350mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 1850kg - Transport packages [pcs.]: 1 Financial information Gkodpfxoxlnfpo Ag Nec VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Price: On request Gkedpfxexiwzzo Ag Nec What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Documentation available: No - CE marking present: Yes - Serial number: AH/335516 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2015, total length: 5,700 mm, total height: 1,900 mm, total width: 1,000 mm, Price: On request - Number of units [pcs]: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue unit - 3rd unit type: Cap unit - 4th unit type: Rough milling unit - 5th unit type: Corner rounding unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit - 8th unit type: Brushing unit - Tools available: Yes - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 12 - Edge band height [mm]: 65 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Min. panel width [mm]: 70 - Year: 2015 - Documentation available: No - CE marking present: Yes - Serial number: - Transport dimensions: 5700mm x 1000mm x 1900mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT Gjdpfx Asw Eafweg Nskc VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets