Used Mg Recycling M_04772 for sale (3,201)

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). Dcsdjvrw Anepfx Apben ● Control panel, power block equipped with locks protection

Condition: refurbished (used), functionality: fully functional, JMC 200 B Dcsdein N Tdspfx Apbjn Immediat delivery from our possible. Fully serviced. New condition McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Condition: used, Year of construction: 2014, Manufacturer: N&N Model: MG-450EFW/160 Year: 2014 Condition: Used Serial Number: 1047 Stock Number: 3438J Mixer: double paddle mixer, intermeshing Djdpoz D Dfyefx Apbecn Capacity: 450 litres Mixing speed: 5 - 40 RPM, variable speed Hole plate diameter: 160 mm Infeed height: 1620 mm Outfeed height: 740 mm Compressed air: 6 - 8 Bar Power: 3 x 400, 50Hz, 36.3kW Dimensions: 2350 x 1650 x 2700 mm Weight: 1815 kg With PZ-2/250 lifter for 200L tote bins, pneumatic lid and safety cover over head

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation Dcedpfx Apszwl Dmjben - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: new, Year of construction: 2026, Complete set of jaws for Metso LT95 / C95 – large tooth, new type This advertisement concerns a complete set of crushing jaws for the Metso LT95 / C95 crusher. The jaws have a profile with a large tooth and are made according to a new design. The set includes: - Fixed jaw – weight 868 kg. - Moving jaw – weight 710 kg. Material composition: 18% manganese, 2% chromium, and the rest is iron. Price for the complete set, EXW Poland. We can arrange shipping worldwide. Our offer also includes other spare parts and consumables: wedges, side plates (cheek plates), toggle plates, toggle plate housings, wear rings, distribution plates, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC, and BOWEX couplings, linings, grizzly grates, and many other components for routine repairs and major overhauls of these machines. Only with us is the chemical composition of the castings confirmed by a QUALITY CERTIFICATE and spectrographic analysis. Do not buy cheaper, lower-quality castings – too low a manganese or chromium content can reduce the lifespan of the jaws by up to half! We offer the widest range of spare parts for crushers and screeners in Poland – for both stationary and mobile machines. We offer parts for machines from brands such as: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab, and others. Dcodpfsz Duv Nox Apbjn

Condition: new, Year of construction: 2026, We offer a complete set of SUPERTOOTH jaw plates for Powerscreen Premiertrak 300 and Powerscreen Premiertrak 330 jaw crushers. Fixed jaw plate — part no. CW017-002-MN180, dimensions 1300 × 973 mm, weight 656 kg, material composition 18% Mn / 2% Cr. Swing jaw plate — part no. CW017-001-MN180, dimensions 1339 × 963 mm, weight 669 kg, material composition 18% Mn / 2% Cr. Djdpfx Aez Dt Tyepbocn Other jaw plate and liner versions are available on request. The parts can also be manufactured from an alloy containing 22% Mn / 2% Cr. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: new, Year of construction: 2026, Mantle and bowl liner set for Metso HP200 STD This listing is for a complete set of wear cones for the Metso HP200 STD cone crusher. The set consists of: Bowl liner (outer cone) — part number N55208134-22, weight 550 kg. Mantle (inner cone) — part number N55308011-22, weight 482 kg. Material composition: 22% manganese, 2% chromium, balance iron. The components are manufactured from castings of the highest quality available on the market. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others. Dsdpfsz Dulwex Apbecn

Condition: new, Year of construction: 2026, Jaw plate set for Metso LT95 / C95 — large tooth, new type This listing is for a complete set of jaw plates for the Metso LT95 / C95 jaw crusher. The jaw plates feature a large-tooth profile and are manufactured in the new design. The set consists of: Fixed jaw plate — weight 868 kg. Swing jaw plate — weight 710 kg. Dcjdpez Durksfx Apben Material composition: 18% manganese, 2% chromium, balance iron. Price per set, EXW Poland. Worldwide shipping can be arranged. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 Dcjdpjyzr Nmefx Apbon • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: new, Year of construction: 2026, overall weight: 700 kg, power: 17 kW (23.11 HP), Mizar Zig-Zag Separators are designed to efficiently separate light and heavy materials using an air-based zig-zag flow system. This advanced technology ensures a high level of precision in material separation, making it ideal for plastic, metal, and composite recycling processes. ✅ Efficient Airflow Technology – Effectively separates materials based on weight and density. Dcodsv Hm I Nspfx Apbsn ✅ High Precision & Consistency – Ensures accurate sorting for optimal recycling results. ✅ Energy-Efficient & Durable – Designed for long-term industrial use. ✅ Easy Integration – Compatible with existing recycling systems. 🔸 Technical Specifications 🔹 ZZS M1 Power: 17 kW Length: 2000 mm Width: 1250 mm Height: 4180 mm Weight: 700 kg

Condition: used, Year of construction: 2017, controller model: NEXUS, _____ Description: Year of manuf. : 2017 Material thickness : 14 mm Technical data Working length:3,100 mm Bending capacity / Folding capacity:14 / 12 mm Upper roll diameter:290 mm Lower roll diameter:270 mm Side roll diameter:210 mm Main motor power:7.5 kW Machine length:4,475 mm Machine width:1,460 mm Machine height:1,520 mm Machine weight:8,000 kg Control system:NEXUS TouchScreen DNC equipment :- NEXUS DNC control system with touchscreen interface :Programming and operation options: :1. Manual mode – all movements controlled via joystick :2. Teach-in mode – saving of positions :3. Input of values for the rollers via the screen :Storage capacity for 300 programmes : :- Rollers made from C45 alloy steel, induction-hardened :to 50–55 HRC : :- Conical bending unit with both :side rollers set at an angle, lower roller set at an angle and :bearing with hardened guide roller : :- Calibration unit for re-rounding :welded tubes Dcedezuikxspfx Apben : :- Brake for the upper roller for greater precision when :positioning the material.

Year of construction: 2020, operating hours: 2 h, condition: reconditioned (used), functionality: unexamined, For sale is a complete PET bottle recycling washing plant for processing used PET bottles into clean PET flakes. The plant is designed for a production capacity of approximately 1,000 kg/h and is suitable for recycling companies, plastics processors, and companies that want to industrially sort, shred, wash, and dry PET bottles. According to the documentation, the water-contacting components are made of SUS304 / stainless steel 304. Technical Specifications Feature Specification Plant type PET bottle recycling and washing plant Capacity approx. 1,000 kg/h Raw material used PET bottles End product cleaned PET flakes Residual moisture ≤ 1% Flake size approx. 14 mm, adjustable Proportion 8–12 mm ≥ 90% Fine granulate ≤ 3% Powder content ≤ 5% Installed power 238 kW Dcjdpfx Ajzhifiepben Power consumption approx. 153 kW/h Water requirement approx. 6–8 t/h, recyclable Working area approx. 59 × 4 × 6 m / approx. 208 m² Personnel requirement approx. 9 people Plant scope The line consists of the central machines for the complete recycling process: Conveyor belts Bale opener / De-Baler Label remover Manual sorting station Metal detector Plastic mill / Crusher Screw conveyor Float-sink washing systems High-speed dewatering machines Hot steam washer High-speed friction washer Zig-Zag label blower for label and dust separation Storage or product silo Electrical control cabinet Description This PET washing plant is designed for the industrial recycling process of post-consumer PET bottles. The process begins with the feeding of the compressed bottle bales, followed by bale opening, label removal, manual sorting, and metal detection. Subsequently, the bottles are shredded and cleaned in several washing, friction, and dewatering stages. The plant features a hot steam washer that operates with water at approximately 90–95 °C and, together with cleaning agents, removes oil, dirt, adhesives, and label residues. The flake stream is further cleaned via float-sink washers to separate caps, label residues, and other foreign substances. The final drying takes place via high-speed dewatering units. The result is clean PET flakes with a residual moisture content of a maximum of 1%, suitable for further processing, e.g., granulation, extrusion, or recycling into plastic products.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 332/18, Plastic regranulation line prepared for processing both film flakes and regrind. Machine capacity: 800–1200 kg, depending on the material. Equipment: 1. Forced feeder 2. 160/54D extruder with two independent degassing zones 3. Cutting system on head, model OR1000 4. Centrifugal dryer 5. Vibrating sieve 6. Additional plasticizing unit (screw + cylinder + feed hopper) Not included in the offer: 1. Automatic mesh filter GB1000 (equivalent to Britas ABMF1050-09) Dcsdpfx Apjy N T Uysben

Year of construction: 2026, condition: new, functionality: fully functional, power: 135 kW (183.55 HP), load capacity: 800 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. Dcodpfx Apeyy Rktjbjn MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 80 kW (108.77 HP), load capacity: 400 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. Dedpfxeyy Ricj Apbscn PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 300 kW (407.89 HP), load capacity: 2,000 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. Dcodsyy Rk Tspfx Apbon MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, functionality: fully functional, power: 200 kW (271.92 HP), load capacity: 1,300 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. Dedpfx Apoyy Rk Hjbocn MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Djdpfot Iwt Uox Apbocn reactions or questions ? please with full name, company name and phone number.

Condition: new, Year of construction: 2026, functionality: fully functional, RSS HD 4 Shaft Shredders in any size, Adjustments to e.g. knives, motors, sieve, frame possible. Supply and discharge belts, storage, metal separation possible. Dcedpfxjh N Dmns Apbjn Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem for advise or information do not wait, contact us. Delivery in consultation.

Condition: used, Year of construction: 2007, operating hours: 6,286 h, 2007 | Wirtgen KMA 200 | Used Asphalt Recycler | 6286 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 139000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 4 approved ✅ 8 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Only visual inspection. Machine said to have been in working condition when purchased used by the owner. Getting the machine ready for work will take a few hours, but will be arranged for a serious buyer. Dodpfx Aezhn D Djpbocn 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31332 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery Dodpfx Asv Hbdrjpbscn

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm Dcjdpfx Aezupzqjpbjn BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, power: 35 kW (47.59 HP), shaft diameter: 400 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 Dcedpfx Ajz Erbxspben • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: used, Used Stainless Steel Millchem Dissolver type FMG25HD. Driven by a 22/15kW, 380V, 1500/750 rpm motor. Stainless Steel Turbine has a diameter of approximately 300mm. Supplied with (1) stainless steel tank with a capacity of approximately 1300 litres measuring 1180mm diameter x 1240mm. Dcodpfxjzd Urgs Apbon

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Djdeua Tbwspfx Apbocn Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.