Used Paternoster - Lagerlif for sale (195)

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, Bledpfoff Huwjx Al Asn • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, functionality: fully functional, machine/vehicle number: 250-1850X825, total height: 6,300 mm, total width: 2,030 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: safety light barrier, KARDEX SHUTTLE 250-1850X825-NT 1 AVAILABLE GREY IN COLOUR TRAY WEIGHT 250KG NUMBER OF TRAYS 45 TRAY DIMENSIONS - 1850mm x 825mm Bljdswtqxdepfx Al Aon AUTO ADJUST TRAY HEIGHT PER TRAY 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT ANY HEIGHT RESTRICTIONS

Condition: used, functionality: fully functional, total height: 6,300 mm, total width: 1,580 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, KARDEX SHUTTLE 250 - 1250X825-NT GREY IN COLOUR 45 TRAYS TRAY DIMENSIONS 1250MM X 825MM AUTOMATIC HEIGHT ADJUSTMENT FOR TRAYS WHEN ENTERING MACHINE 12 MONTHS WARRANTY Bljdpjwtqz Eofx Al Aen SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT INTO ANY HEIGHT RESTRICTIONS

Condition: used, functionality: fully functional, machine/vehicle number: 7010X3000, total height: 7,010 mm, total width: 3,000 mm, total length: 2,100 mm, load capacity per storage section: 300 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: safety light barrier, MEGAMAT FSE STORAGE LIFT SYSTEM GREY IN COLOUR 300KG PER TRAY 40 TRAYS INCLUDED TRAY DIMENSIONS 2652mm x 612mm AUTOMATIC HEIGHT ADJUSTMENT 12 MONTHS WARRANTY KEYPAD OPERATION WHICH CAN BE UPGRADED TO PC/SOFTWARE AT ADDTIONAL COSTS SERVICE & MAINTENANCE CONTRACT AVAILABLE Bsdpfxowtrcqo Al Aeln

Condition: used, Year of construction: 2011, total height: 11,550 mm, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C3000, with OP3000 OPGraphic color display Serial No.: 11007548/001 Year of construction: 2011 Load per tray: Medium: 205 kg & Heavy: 265 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 11,550 mm (height of Kardex is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid subject to the system being unsold. Bedpfxjzuvtae Al Ajln Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays, Medium: 205 kg & Heavy: 265 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 x 11,550 mm - Footprint of the system approx.: 10.39 m2 - Capacity with 32 trays: approx. 84 m2, each tray approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C3000, with OP3000 OPGraphic color display - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Including light pointer (requires software to function; software is not included with the machine) Price: on request, via email only Price: excl. VAT, including transport, installation and warranty Delivery time: in stock Machinehandel De Leeuw BV is one of the few companies in Europe that deals in and has in stock primarily used Kardex Remstar VLM automatic lift & rotating storage systems. See our website for current stock. We install and/or dismantle these systems in a safe manner with VCA-certified technicians, and we have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), functionality: fully functional, machine/vehicle number: XP2000, total height: 7,550 mm, total width: 2,780 mm, total length: 3,070 mm, load capacity per storage section: 500 kg, construction height: 7,600 mm, type of input current: three-phase, input voltage: 415 V, empty load weight: 500 kg, warranty duration: 12 months, load capacity: 20,000 kg, Equipment: documentation/manual, safety light barrier, Kardex shuttle 500 XP2000 415v Colour Blue & Grey Max load per tray 500Kg Number of Trays 40 Total machine load 20,000 Kg Bledpfsrgqw Eex Al Aen Tray Dimensions width - 2450mm x 864mm depth Machine Dimensions 7550mm x 2780mm x 3074mm These machines are modula and can be reduced in Height to fit any facility Full installation service available with 12 months warranty Supply only without warranty Service & Maintenance available after installation if required

Condition: used, Year of construction: 2018, total height: 8,950 mm, Automated warehouse optimization storage system KARDEX Shuttle XP250 System Type: SHUTTLE-XP-250-3050x864 Control: Logicontrol, with color touchscreen display Serial No.: 18001465/001 Year of construction: 2018 Load per tray: Medium: 205 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 8950 mm (height of Kardex is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 Hz, 8.6 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum tray capacity: 32 trays, Medium: 205 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 x 8950 mm - Footprint of the system approx: 10.39 m2 - Capacity with 32 trays: approx. 84 m2; each tray is approx. 2.64 m2 - Electronic volume measuring system with 25 mm grid - An access opening with sliding doors to protect people and stored goods - Logicontrol, with color touchscreen display - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking Price: upon request, via email only Price: excl. VAT, including transport, installation, and warranty Delivery time: in stock Machinehandel De Leeuw BV is one of the few companies in Europe that deals with and has in stock primarily used Kardex Remstar VLM automatic lift & rotating warehouse systems. See our website for current stock. We safely install and/or dismantle these systems with VCA-certified technicians, and we have been doing so for over 33 years. Bljdpfszuvq Ejx Al Ajn We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2014, total height: 6,550 mm, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: Logicontrol, with colour Touchscreen display Serial No.: 14001667/002 Year of construction: 2014 Load per tray: Medium X Typ2: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more trays available upon request) Dimensions Shuttle W x D x H: 3380 x 3074 x 6550 mm (Kardex height is adjustable to available height) Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Typ2: 460 kg each, evenly distributed, more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 x 6550 mm - Footprint of the system approx.: 10.39 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Logicontrol, with colour Touchscreen display - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking Price: upon request, only via email Price: excl. VAT, including transport, installation, and warranty Delivery time: in stock Machinehandel De Leeuw BV is one of the few companies in Europe that trades in and stocks mainly used Kardex Remstar VLM automatic lift and rotating warehouse systems. Please visit our website for the current stock. We install and/or dismantle these systems in a safe manner with VCA-certified technicians, and we have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard. Machinehandel De Leeuw BV Bsdpfozuvt Tox Al Aeln Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 1989, Gewinner Euromat Bodpeya Dklefx Al Aoln Type: Gewinner Euromat Machine No.: 120-50508-18 Year: 1989 Machine height: approx. 5600 mm Machine width: approx. 3300 mm Machine depth: approx. 1450 mm + 330 mm table top Number of trays: 18 Tray width: approx. 2450 mm Tray depth: approx. 520 mm Tray height: approx. 500 mm Compartment load capacity: 510 kg Total load capacity: 9100 kg Colour: Beige front / corners blue

Year of construction: 2012, condition: good (used), Type: IND-PA Device No.: 0/1220744/1 Year of manufacture: 2012 Device height: approx. 5600 mm Device width: approx. 2870 mm Device depth: approx. 4000 mm Number of rollers: 45 Bedpfxshyhlgs Al Aoln Roller width: approx. 2370 mm Shelf load capacity: 200 kg Total load capacity: 9000 kg Color: beige

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Bodjyiflgspfx Al Aoln

Condition: new, functionality: fully functional, Equipment: safety light barrier, Replacement controller for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" control systems, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit storage systems of all manufacturers and types. Blsdpfx Aoq Rcmtjl Aon The storage systems can remain fully loaded for the conversion. We can also provide special solutions as well as software connections.

Condition: used, functionality: fully functional, total height: 5,720 mm, total width: 3,470 mm, total length: 2,300 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: safety light barrier, MODULA LIFT SYSTEM MX25 MX1220043 GREY IN COLOUR 415V 250KG PER TRAY TRAY DIMENSIONS 2500mm x 800mm 35 TRAYS Bsdpfx Aowtrbgjl Aoln KEYPAD OPERATION 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACT AVAILABLE THIS MACHINE IS MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT ANY HEIGHT RESTRICTIONS

Condition: excellent (used), functionality: fully functional, machine/vehicle number: NT2000, total height: 4,300 mm, total width: 3,300 mm, total length: 2,980 mm, load capacity per storage section: 250 kg, construction height: 435,000 mm, input voltage: 415 V, warranty duration: 12 months, load capacity: 250 kg, Equipment: documentation/manual, safety light barrier, Kardex 500 Shuttle NT2000 Blodpfx Aergqxmsl Aen 1 Available 415v 3 phase netural & Earth 16 amps into an isolator required Colour Blue & Grey Max load per tray 250Kg Number of trays 20 per machine Machine Dimensions 4300mm Height x 3300mm Width x 2980mm depth Tray Dimensions 3000mm width x 860mm depth Delivery, installation & 12 months warranty available Supply only available without warranty Service & Maintenance contracts available for these machines

Condition: like new (used), Year of construction: 2023, We currently have three SSI Schäfer Logimat SLL 3625x815 Vertical Lift Modules for sale. All three machines were manufactured in 2023 and are in excellent condition. They have seen very little use and have been serviced annually by the manufacturer since installation. Each machine has a height of 11,550 mm. The height can be adjusted and lowered during installation to fit the building’s ceiling height. Each machine has: 62 trays Tray width: 3,625 mm Tray depth: 815 mm Total storage area: approximately 183.1 m² Maximum tray load: 450 kg Together, the three machines provide approximately 549.3 m² of storage space. The machines are equipped with several optional features: LogiPointer LogiTilt LogiBar LogiDriver LogiWork These features help make the picking process faster, easier, and more ergonomic. They also help reduce picking errors and improve the operator’s working position. Bedpfxszzwuro Al Ajln Please note that these optional features require integration with a WMS or business system. Specifications: Model year: 2023 Model: SSI Schäfer Logimat SLL 3625x815 Machine height: 11,550 mm Machine width: 4,135 mm Machine depth: 3,092 mm Tray width: 3,625 mm Tray depth: 815 mm Number of trays: Approx. 60 / machine Maximum weight per tray: 450 kg Electronics: 3/N/PE 230/400V

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 106000162, total height: 4,400 mm, total width: 2,350 mm, total length: 10,470 mm, construction height: 4,400 mm, construction width: 2,350 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,000 kg, input frequency: 50 Hz, input current: 28 A, Equipment: documentation/manual, Kardex Remstar LR-35 vertical buffer module (Compact Buffer / Miniload-in-a-Box) with integrated SmartLOG pick-to-light system. Year 2020. Like new, never used. Zero operating hours. The system was fully commissioned by the installer, but the company ceased operations before it entered service, so the machine has been idle in like-new condition since installation. Technical data (nameplate): Type: LR-35-20X400X600X4400 Serial number: 106000162 Year: 2020 Manufacturer: Kardex Produktion Deutschland GmbH, Neuburg plant Nominal voltage: 3/N/PE 400 V, 50/60 Hz Nominal power: 20.0 kVA / 28.8 A Max. load per bin: 35 kg Certification: CE, TUV SUD, GS Configuration (installer specification): Dimensions: 2,350 mm wide x 10,470 mm long x 4,400 mm high Storage: 2 aisles x 20 portals x 17 levels Bjdpfx Asztzqbel Aeln 675 bins of 400 x 600 x 122 mm Useful volume: 19.76 m3 Throughput: 110 to 130 bins per hour At 4.4 m high, the machine fits a standard warehouse, unlike taller LR units that require a very high building. Location: San Sebastian, Spain. Sold ex location, buyer arranges dismantling and transport. Full documentation available (invoice, CE declaration, manuals, installer technical specification, and layout drawing). A second identical unit (2019, low use) is also available. Price negotiable. Serious inquiries welcome.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 3,900 mm, load capacity per storage section: 400 kg, Manufacturer: HÄNEL Model: Lean Lift Shelf dimensions: 3260/825mm Number of shelves: 25 Load capacity per shelf: 400 kg Rack height: 3.90m Year of manufacture: 2016 Operating hours (number of cycles): 22100 Maximum storage capacity: 40,000 kg Control system: MP 12N-S Hänel The rack is in excellent condition with minimal signs of wear. This machine is highly recommended. We can arrange transportation and installation after purchase. Blodpfxoy Dgkko Al Aen

Condition: used, Year of construction: 1998, Hänel Type: Rotomat 950 Device No.: 120.657*1 Year of manufacture: 1998 Device height: approx. 3800 mm Device width: approx. 3140 mm Device depth: approx. 1250 mm + 330 mm tabletop Number of trays: 18 Tray width: approx. 2880 mm Tray depth: approx. 400 mm Tray height: approx. 310 mm Blsdpfoy D S Hwox Al Aen Shelf load capacity: 300 kg Total load capacity: 5400 kg Colour: Beige front / corners grey

Condition: good (used), Year of construction: 2011, We now have two Kardex Shuttle XP 500 units, 3050 x 813 mm, from 2011 available for sale. Bljdpfx Ajzybfxel Aen The machines are in good condition and have been regularly serviced since installation. The Kardex Shuttle XP 500 is a reliable and proven storage system used by thousands of companies worldwide. Each tray is 3,050 mm wide and 813 mm deep, providing 2.5 m² of storage space. The system offers a total of 112.5 m² of storage space while using only 9.87 m² of floor space. Technical Information: Model year: 2011 Model: SHUTTLE-XP-500-3050x813 Machine height: 7,500 mm Machine width: 3,380 mm Machine depth: 2,921 mm Tray width: 3,050 mm Tray depth: 813 mm Number of trays: Approx. 45 / machine Maximum weight per tray: 210 kg Electronics: 3/N/PE 230/400V 17A

Condition: like new (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 106000127, total height: 4,400 mm, total width: 2,350 mm, total length: 10,470 mm, construction height: 4,400 mm, construction width: 2,350 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,000 kg, input frequency: 50 Hz, input current: 29 A, Equipment: documentation/manual, Kardex Remstar LR-35 vertical buffer module (Compact Buffer / Miniload-in-a-Box) with integrated SmartLOG pick-to-light system. Year 2019. Used, good condition, approximately 7 months in service. This was the original unit at the site. It operated for about 7 months before the company ceased operations, so it is in very good working order with low operating hours. Fully commissioned and functional. Technical data (nameplate): Type: LR-35-20X400X600X4400 Serial number: 106000127 Year: 2019 Manufacturer: Kardex Produktion Deutschland GmbH, Neuburg plant Nominal voltage: 3/N/PE 400 V, 50/60 Hz Bedozu Ttkjpfx Al Aeln Nominal power: 20.0 kVA / 28.8 A Max. load per bin: 35 kg Certification: CE, TUV SUD, GS Configuration: Dimensions: 2,350 mm wide x 10,470 mm long x 4,400 mm high Storage: 2 aisles x 20 portals x 17 levels 675 bins of 400 x 600 x 122 mm Useful volume: 19.76 m3 Throughput: 110 to 130 bins per hour At 4.4 m high, the machine fits a standard warehouse, unlike taller LR units that require a very high building. Location: San Sebastian, Spain. Sold ex location, buyer arranges dismantling and transport. Full documentation available (invoice, CE declaration, manuals, technical specification, and layout drawing). A second identical unit (2020, never used) is also available. Price negotiable. Serious inquiries welcome.

Condition: good (used), Vertical carousel rack for carpet and flooring rolls. Bedpfszz Icgjx Al Asln Robust and fully functional carpet paternoster / carousel rack. The system is ideal for space-saving vertical storage and presentation of carpet rolls, PVC flooring rolls, or other heavy rolled materials. Technical Details Length: approx. 4,000 mm Capacity: approx. 12–16 support bars / roll positions The carpet and flooring rolls belonging to the respective carousel rack can be purchased separately for an additional €1,000 net. Item location: Frankfurt am Main, Germany Collection period: Collection must take place between the end of September and the beginning of October. Option 1 – Self-collection: Dismantling and transport are carried out independently by the buyer. Option 2 – All-inclusive package: We can provide professional dismantling including delivery throughout Germany for a flat additional charge of €1,000 net plus VAT. Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. Bedeup R U Uepfx Al Aeln The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Device No.: 03502 Year of Manufacture: 2003 Device Height: approx. 4500 mm Blsdpfx Ashyhlkol Ajn Device Width: approx. 2000 mm Device Depth: approx. 7010 mm Number of Rollers: 44 Roller Width: approx. 1680 mm Shelf Load: 150 kg Total Load: 7000 kg Superstructure: see photo, 3000 mm Color: beige

Condition: reconditioned (used), modernized machine with new LTG StoreControl P control system External dimensions: Overall height: 5000 mm Overall width: 2650 mm Overall depth: 1250 mm plus 300 mm discharge table 34 carriers, each with a payload of 140 kg in the clear internal dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch: 254 mm Bjdpfx Ajdnfdljl Ajln Discharge table at 1000 mm above the top edge of the machine frame, with a wooden worktop Color: GRAY, surfaces cleaned, signs of use possible Motor power, drive: 1 x 1.8 kW / 400 Volt Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: excellent (used), Year of construction: 2016, We are offering a Kardex Shuttle XP 500 from 2016 for sale. The machine has been regularly serviced by Kardex since its installation and has always been used in a clean and well-maintained environment. As a result, it is in very good condition. The Vertical Lift Module is equipped with 38 trays, each measuring 2,450 mm wide and 864 mm deep, providing a total storage area of 63.5 m². With a total height of 6,050 mm, the machine is suitable for a wide range of warehouse and production applications. The machine is also fitted with an LED pointer that indicates the correct picking location. This helps increase picking speed and reduces the risk of picking errors. To use this feature, the machine must be integrated with an ERP system or a Warehouse Management System (WMS). Technical information: Model year: 2016 Model: SHUTTLE-XP-500-2450x864 Machine height: 6,050 mm Bedpfx Aezlymljl Aeln Machine width: 2,780 mm Machine depth: 3,072 mm Tray width: 2,450 mm Tray depth: 864 mm Number of trays: 38 Maximum weight per tray: 360 kg Electrical supply: 3/N/PE 400V, 17A