Used Plansee Sputter Target for sale (204)

Condition: used, UHV deposition system (ebeam sputter) UHV deposition system: Was used for deposition Titanium - Gold (ebeam) Iijdpfeuhcn Nsx Afhsg Ebeam deposition unit is removed Cryopump and prepump is removed Loadlock: for samples round 75mm Incl. sample heater 450l/s turbomolecular pump (Leybold) Proceschamber: Size: Width 680mm x Height 750mm x Depth 590mm Incl. shielding Double oring door (partially pumped) Heaters Basepressure low 10-7mbar, high 10-8mbar Electronics: Baseline cabinet (e-beam unit removed) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 55.000,-

Condition: used, This listing is for the This listing is for the Bruker microflex mass spectrometer The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Iedpfxjxhdxqj Afhjig Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Environment: Requires clean, stable temp/humidity condition

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm Isdpsx E Rdwsfx Afhsig - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: used, This listing is for the Akta crossflow filtration system The unit is in full working condition and is ready for immediate use An ÄKTA Crossflow filtration system is a type of tangential flow filtration (TFF) system developed by Cytiva (formerly GE Healthcare). It's used primarily in bioprocessing and biotechnology applications to concentrate, diafilter, or clarify biological samples such as proteins, viruses, plasmids, and other biomolecule Core Functions: Concentration – Reducing the volume of a sample while retaining the target biomolecule. Diafiltration (Buffer Exchange) – Removing salts or changing the buffer environment by continuously adding a new buffer while removing permeate. Clarification – Removing particulates or cells from process fluids Key Components: Pump Modules: Typically peristaltic pumps that manage flow rates precisely. Filtration Cassettes: Hollow fiber or flat sheet membranes for ultrafiltration or microfiltration. Pressure Sensors: To monitor and control transmembrane pressure (TMP). Conductivity/pH/UV Detectors: For in-line monitoring of the filtrate and retentate. Benefits: Automation reduces operator error and variability. Scalable design for seamless transition from lab to production. Iisdpfexhf A Rox Afhjg Precise control of filtration parameters (flow rate, pressure, volume). CIP (Clean-In-Place) capabilities for easy maintenance and compliance with GMP. Common Applications: Protein concentration and buffer exchange Viral vector purification Plasmid DNA purification Cell harvest and clarification

Condition: used, This listing is for 1 of 4 non operational Eppendorf EntericBio Workstation. This unit is supplied nonoperational and is ready for immediate release. The Eppendorf EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system. Key Features and Benefits: - Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency. - Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling. - Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run. - Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes. - Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing. Isdpfx Asxxygfefhjig - Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices. - User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time. - Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

Condition: used, This listing is for 1 of 3 Eppendorf EntericBio Workstation. The unit is in full working condition and is ready for immediate release. The EntericBio Workstation is an automated system designed to set up reactions for the EntericBio PCR testing system. Iijdoxxyglopfx Afhsg Key Features and Benefits: - Automation and Efficiency: The workstation automates the transfer of processed samples directly into lyophilized reaction wells, significantly reducing hands-on time for lab personnel. This automation allows staff to focus on other critical tasks while enhancing workflow efficiency. - Direct Detection: One of the most notable features is its ability to detect target DNA and RNA directly from stool specimens, eliminating the need for commercial nucleic acid extraction or purification. This streamlining of the process not only saves time but also minimizes sample handling. - Flexibility: The EntericBio Workstation offers a comprehensive modular menu capable of testing for a wide array of gastrointestinal pathogens, including bacteria, parasites, CPE, and viruses, all within the same workflow. For example, it can simultaneously identify pathogens such as Salmonella and Norovirus in a single run. - Speed: The system is designed to process up to 46 specimens per run, delivering results in less than 3 hours. Additionally, it can perform consecutive runs every hour, making it ideal for laboratories with high sample volumes. - Accuracy: The EntericBio system boasts a remarkable mean time before failure of over 50 months and a specimen inhibition/failure rate of less than 2%, ensuring reliable results for laboratory testing. - Environmental Benefits: By reducing clinical waste by 88% and consumable storage needs by up to 85% compared to traditional microbiology methods, the EntericBio Workstation contributes to more sustainable laboratory practices. - User-Friendly: Designed for all levels of staff, even those without previous molecular experience can operate the system thanks to its automated interpretation analysis software tailored for specific test kits. This feature enhances accessibility and reduces training time. - Modular Footprint: With its small and modular design, the EntericBio Workstation can be flexibly placed in various laboratory settings, allowing for efficient use of space without compromising functionality.

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Iiedpfx Aex H T H Refhog Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20681, The Semmelroth S 50229/2 is a fully automatic, industrial continuous cleaning system in a timed linear design. It was specifically developed for the demanding cleaning of parts and surface preparation of aluminum and cast parts in industrial multi-shift operations. The system is completely made of stainless steel to ensure maximum corrosion resistance and durability when using aqueous cleaning media. System and Conveyor Technology - Transport system: Integrated, automated carrier circulation system. Iiodpfxjzzpb Rj Afheg - Process coupling: Designed for timed linear systems for seamless integration into linked production and robotic cells. - Carriers: Customer-specific carrier design for precise and repeatable component placement during the process. Zone Layout and Process Steps The system goes through a five-stage process chain to meet the highest requirements for particulate and film-like surface cleanliness: - HD cleaning zone (high pressure): Mechanical pre-cleaning using high-pressure nozzles for targeted removal of chips, machining residues, and stubborn contaminants. - Cleaning zone (washing): Aqueous main cleaning (spraying/flooding) for chemical degreasing and removal of dirt from the surface. - Rinsing zone: Downstream rinsing stage for residue-free removal of cleaning agent components from the component surfaces. - Drying zone: Highly efficient blowing and drying unit for complete removal of residual moisture (prevents staining and corrosion). - Cooling zone: Targeted component cooling at the end of the process to thermally stabilize the parts for subsequent processes (e.g., metrology, testing, or packaging). Media preparation, filtration, and peripherals To ensure long bath life and consistent cleaning quality, the system is equipped with extensive peripheral technology: - Filtration: Three separate filtration stages (each designed for up to 10 bar) for the cleaning, rinsing, and high-pressure zones. - Filter monitoring: Dual differential pressure measurement for automatic detection of the filter saturation level. Oil separation: 1x highly efficient oil separator (Type ÖT 60) for continuous removal of foreign oils from the washing bath. - Exhaust air management: 1x air-cooled condenser (Type RL 150) for condensation and extraction of process fumes (reduces humidity at the installation site). - Fluid management: Integrated wastewater piping for cleaning and rinsing tanks, including a robust 1" wastewater pump for emptying. Safety and System Monitoring - Process control: Two integrated viewing windows with splash-proof interior lighting for optical monitoring of the cleaning process during operation. - Environmental protection / emergency protection: Robust drip tray under the entire system, equipped with a leak detection probe for automatic shutdown in the event of media loss. Technical Performance Data - Manufacturer: Semmelroth Anlagentechnik - Model: S 50229/2 - Total connected load: approx. 110 kW - Material: Stainless steel (V2A / V4A)

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. Iiodpfszgaazjx Afheg The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Isdpfexqhuujx Afhoig Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), cutting width (max.): 450 mm, control type: CNC control, overall weight: 6,100 kg, Equipment: CE marking, documentation/manual, in production from 2023 / 1 shift only, 6200 hours band 6830 x 54x1,3 It is a highly efficient automatic,band-saw with multiple material feed. Bandsaw is designed for performance cutting of very hard and tough materials. This bandsaw is using extremely robust construction optimized with target to get maximum rigidity of machine and minimum vibrations. Stroke of frame and feeder stroke is realized by sharpened ball screws. Machine guarantees maximum possible power a precision. The machine is designed for vertical cuts. It is suitable for serial production in industrial premises. The machine is designed to saw steel materials, but also non-ferrous and light metals. However, we recommend consulting the manufacturer about this option. Iisdpfxeykkqgj Afhjg Conception of bandsaw is FCV= feeder-cut-main vice. Conception FCV enable cut material in automatic cycle with shortest possible end. Cutting parameters The shortest cutting mm 10 The smallest divisible diameter mm 30 The shortest rest during one cut mm 40 The shortest rest during automatic cut mm 90 Single step of material feed Min mm 3 Single step of material feed Max mm 730 Multiple feed mm 19999 Performance parameters Blade dimensions mm 6830x54x1,3 Blade speed m/min 20-150 Blade drive kW 9 Pump of the cooling emulsion kW 0,16 Blade cleaning brush motor kW 0,12 Chip conveyor motor kW 0,12 Motor of the blade drive cooling kW 0,6 Frame ballscrew motor kW 0,5 Feeder ballscrew motor kW 1,5 Electric input Ps kW 17,7 Installed power Ps kW 12,8 Electrical connection 3 x 400V, 50Hz, TN-S

Condition: used, This listing is for the LEEC P33 Mk 11 Proportional Temperature Controller The unit is in full working condition and is ready for immediate use LEEC P33 Mk 11 Proportional Temperature Controller (Precision Incubator) Iedpfxexhfi Rs Afhjig This unit is a microprocessor-based PID (Proportional‑Integral‑Derivative) temperature controller, designed to deliver exceptionally stable temperature regulation within the LEEC P33 Precision Incubator. Key Features & Performance Highly Accurate Regulation: Maintains temperature within ±0.1 °C at 37 °C—ideal for sensitive biological and laboratory applications. Dual Temperature Display: Clearly shows both the user-set "target" and the current "actual" temperature on a digital LED display, with indicators for when heating is active. Proportional (PID) Control: Employs PID control through low-wattage heating elements profiled to avoid hot spots. This ensures smooth transitions and precise thermal stability. Fast Recovery & Uniformity: Recovery Time: Approximately 6 minutes to return to set temperature after door opening. Uniformity: Achieves ±1.0 °C variation across the chamber. Fan-Assisted Circulation: Twin fans create gentle, full-width airflow; fans automatically shut off when the door opens to reduce heat loss. Safety Cut-Out: A digitally adjustable over-temperature safety cut-out prevents accidental overheating; visual indicators and alarms streamline monitoring. Context: P33 Precision Incubator Specifications Temperature Range: From at least 5 °C above ambient up to +60 °C. Capacity & Construction: Chamber Volume: 730 litres, built from stainless steel. Dimensions: External—1550 × 1270 × 660 mm; Internal—1275 × 1140 × 490 mm. Weight: 225 kg. Mobility: Castor wheels are included—lockable for stability. Power: 600 W rating for heating operation. Optional Accessories: Additional shelves (L3) Internal power point (PP) External cooling unit required for operation near or below ambient temperature (e.g., LEEC recirculating cooler) Summary The LEEC P33 Mk 11 proportional (PID) temperature controller offers precise, stable, and responsive control—maintaining ±0.1 °C at 37 °C with fast recovery and uniform temperature distribution. It features handy dual displays, safety cut-outs, and is complemented by a robust chamber design. Perfectly suited for high-demand laboratory and incubation applications.

Condition: used, This listing is for a Kendall Genius 2 Checker/Calibrator The Genius™ Checker & Calibrator checks the accuracy of the Genius™ tympanic thermometer and automatically recalibrates the thermometer, if necessary. In addition, the checker & calibrator has the capability to generate a test report for each thermometer tested and save it to a USB flash drive. It works with all Genius™ thermometer software revisions. The Genius™ checker and calibrator contains two independently controlled infrared calibration targets that are similar to factory calibration targets. These “blackbody” targets are designed to have efficient radiative heat transfer and produce infrared radiation that approximates the human ear at temperatures of 32.2°C (90.0°F ) and 40.6°C (105.0°F). Ijdoxzgvxopfx Afhjig

Condition: used, This listing is for the Mettler Toledo ICS439 Weighing Terminal The unit is in full working condition and is ready for immediate use The ICS439 is a scale indicator / weighing terminal used to process signals from load cells (i.e. weight sensors) and display weight, tare, net, etc. It belongs to the ICS4_9 “wet environment / hygienic” family, meaning it is intended for use in harsher or wash‑down conditions (e.g. food processing, pharmaceutical, industrial) where water, cleaning, or humidity are a factor. It can function either as a standalone terminal (connected to a weighing platform) or as a compact scale (terminal + platform combined) depending on configuration Isdpfxjxhdr Re Afhsig Use Cases & Applications Often used in industrial / production settings for basic weighing and checkweighing (i.e. verifying whether a weight is above / below a target threshold) Particularly suitable for hygienic / wet environments (e.g. food processing, chemical, pharma) due to its high ingress protection and stainless steel construction. Can integrate into plant control systems via its communication interfaces to send weight data to a computer/PLC for automation or logging

Condition: used, This listing is for the Astoria Pacific Chemistry Analyser The unit is in full working condition and is ready for immediate use The Astoria-Pacific Chemistry Analyser is the standard single‑rack sampler module designed for the Astoria segmented flow analyser system—a precision instrument used in environmental, industrial, and research labs. Key Features Random‑Access XYZ Probe Moves in X, Y, and Z axes to target individual samples with a 12-place dedicated standards/calibrant rack Single Wash Station with Dedicated Pump Maintains probe cleanliness and avoids cross-contamination using an independently controlled wash reservoir and pump Supports Multiple Rack Types Iijdpfx Afjxhft Ajheg Compatible with both sample cups (2 or 4 mL) and test tubes (12–16 mm), and supports up to 102 total positions (90 samples + 12 standards)

Condition: used, This listing is for the Qiagen Rotor-Gene Q (Parts Only) The Qiagen Rotor-Gene Q is a high-performance real-time PCR cycler known for its unique rotary design and precision thermal control, offering exceptional uniformity and optical performance. This specific configuration includes 2 optical channels (Green and Yellow), making it ideal for targeted applications such as gene expression, viral detection, and SNP genotyping. Key Features Rotary Air Chamber Design: Ensures uniform thermal conditions and eliminates edge effects. 2 Optical Channels: Green and Yellow channels support common fluorophores such as FAM, HEX, and VIC. Rapid Cycling: Heating rate >15°C/s and cooling rate >20°C/s. Iijdpfxjxv A Aws Afhjg High Sensitivity: Fast fluorescence acquisition (≤4 seconds

Condition: used, This listing is for the LEEC C330 Classic Incubator The unit is in full working condition and is ready for immediate use Key Specifications Chamber Capacity: 330 litres External Dimensions: 1417 mm (H) × 684 mm (W) × 620 mm (D) Isdpfx Afsxhf Umehsig Internal Dimensions: 1200 mm (H) × 550 mm (W) × 500 mm (D) Temperature Range: Ambient +5°C to +60°C Temperature Control Accuracy: Typically ±0.1°C at 37°C Temperature Variation: Typically better than ±0.2°C at 37°C Temperature Recovery Time: Approximately 4 minutes Power Rating: 440 watts (maximum) Weight: 107 kg Shelves Included: 6 Construction: Fully sealed chamber with polished stainless steel and rounded corners for easy cleaning Air Circulation: Fan-assisted for even temperature distribution Safety Features: Over and under temperature alarms, independent overheat safety cut-out, and password-protected settings Controller: Digital microprocessor with Fuzzy Logic and Auto-Tune features Notable Features Energy Efficiency: Low wattage heating elements combined with high-performance thermal insulation ensure excellent temperature stability while minimizing energy consumption. User-Friendly Interface: The digital controller displays both target and actual temperatures in real-time on a two-color display, making it simple to monitor and adjust settings. Enhanced Safety: Programmable alarm thresholds and an independent safety cut-out provide added protection against over-temperature conditions. Maintenance-Friendly Design: The sealed chamber with rounded corners facilitates easy cleaning, and the rear access port allows for safe insertion of temperature monitoring probes.

Condition: like new (used), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, overall weight: 59 kg, input voltage: 230 V, total length: 1,330 mm, total height: 1,028 mm, total width: 568 mm, Heat and dry a large hall, greenhouse, workshop, storage room, or construction site for extended periods without interruption for refueling. This low-usage APEX BGO-80B delivers 80 kW of heating output and comes with a complete 1000-liter external tank system, including a certified steel containment basin, for long runtimes between refills. The built-in 69-liter tank is sufficient for shorter jobs. Approximately 200 operating hours; manufactured 01/2026; thermostat-controlled automatic operation. Only one unit is available – once sold, it’s gone. Pickup and transport slots are limited. Best for: heating and drying halls, workshops, greenhouses, storage rooms, and construction sites requiring long runtimes without refueling. Not suitable for: enclosed spaces without an exhaust connection or living areas – indirectly fired, with exhaust vented through the Ø150 mm chimney. What the specifications mean in practice: • 80 kW heating output – heats large halls and open working areas, not just a corner. • 1000L external + 69L internal tank – long runtime with fewer refills. • 2,000 m³/h airflow – distributes warm air across a wide area. • Thermostat + digital display + 10m external room thermostat – automatic operation. • Indirect firing, Ø150mm chimney – combustion gases are vented outside, keeping the air clean for drying. • Large-wheel chassis – can be repositioned by a single person. Complete package includes: heater with digital thermostat and removable chimney, external room thermostat (10m cable), 1000L tank with EAGS-certified steel containment basin (mfg. no. 199890), and 2 oil-resistant connection hoses. Technical data: – Model: APEX BGO-80B (Type 56217) – Heating output: 80 kW / 68,800 kcal/h – Fuel: Diesel/heating oil – Consumption: 7.5 l/h – Mains voltage: 230V~50Hz – Fan motor: 900W – Blower output: 2,000 m³/h – Blower outlet: 340mm Isdpfjzrwapjx Afheig – Chimney: Ø150mm – Internal tank: 69 l – Dimensions: 1330x568x1028mm – Weight: 59 kg – Manufactured: 01/2026 – Protection: IPX4 Condition: Well-maintained, ~200 operating hours, fully functional. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: manufactured 01/2026, only ~200 hours of use, used by us for hall heating/drying, fully functional, test run possible before pickup. Nameplate photos and a running video are available; in-person inspection in Kerns OW by appointment. You may verify the identity, condition, and operation before paying – we guarantee the machine is as described, complete, and functional at the time of inspection. Why buy now: a single used unit, not stock. Once sold, this configuration (heater + tank + certified basin, sold together) is gone. First-buyer bonus: free functional test run before pickup, tank connected and thermostat set to your target temperature, at no extra cost. Valid until Sept 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: used, functionality: unexamined, Siemens SIMATIC S5 Spare Parts Lot / Assemblies / Power Supplies / Modules / Rack Construction For sale is an extensive lot of Siemens SIMATIC S5 spare parts, as well as additional Siemens components from the field of automation and control technology. The parts were professionally removed from an operational system. No further functional testing was carried out. Therefore, the sale is as used / untested and exclusively for commercial buyers. This lot is ideal as a source of spare parts for existing systems, retrofits, repairs, stockpiling, or targeted removal of individual modules. Included are, among others: 4x SITOP Power 5 – 6EP1 333-1SL11 Isdpfjy Scg Dex Afhsig 5x SIMATIC S5-95U – 6ES5 095-8MA04 13x SIMATIC S5 – 6ES5 482-8MA13 12x SIMATIC S5 – 6ES5 421-8MA12 4x SIMATIC S5 – 6ES5 441-8MA11 1x SIMATIC S5 – 6ES5 521-8MB11 3x SIMATIC S5 – 6ES5 521-8MB12 4x SIMATIC S5 – 6ES5 470-8MB12 1x SIMATIC S5-100U – 6ES5 103-8MA03 1x SIMATIC S5-100U – 6ES5 103-8MA02 16x SIMATIC S5 BUS Module – 6ES5 700-8MA11 1x SIRIUS – 3RW4027-1BB14 1x Siemens – 6EW1380-1AA 1x SIMATIC NET CP for Profibus – 6GK7342-5DA01-0XE0 2x SIMATIC S5 – 6ES5 095-8MA05 1x SIMATIC S5 – 6ES5 942-7UA13 1x SIMATIC S5 – 6ES5 943-7UA22 1x SIMATIC S5 – 6ES5 470-7LA12 1x SIMATIC S5 – 6ES5 135-3KA13 8x SIMATIC S5 Memory Modules 1x SIMATIC S5 – 6ES5 375-1LA15 1x SIMATIC S5 – 6ES5 375-1LA14 2x SIMATIC S5 – 6ES5 375-1LA21 1x LOGO!Power – 6EP 1332-1SH43 2x SIRIUS – 3RT2017-2AP01 1x Siemens SIMATIC S5 Rack Construction Condition: - Used - Untested - Professionally removed from an operational system - Age- and usage-related storage, operational, and dismantling marks - Sale as shown in photos and described in the item description Scope of delivery: Exactly the lot shown and described will be delivered. For details, see item description. Note: The sale is expressly as a used spare parts lot, without any guarantee of completeness, functionality of individual modules, or suitability for a specific purpose. Ideal for specialized companies, maintenance businesses, and dealers.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,159 h, travel distance X-axis: 500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 800 mm, number of axes: 3, This 3-axis HAGE 3D Precision One was manufactured in 2023. It features a generous build volume of 500 × 700 × 800 mm and a maximum printing temperature of up to 450 °C. The printer is equipped with a heated build chamber and print bed, ensuring optimal conditions for high-temperature plastics. If you are looking to get high-quality 3D printing capabilities, consider the HAGE 3D Precision One industrial FDM/FFF 3D printer we have for sale. Contact us for further details. • Heated Build Chamber: Up to 150 °C • Heated Print Bed: Up to 180 °C • Maximum Printing Temperature: Up to 450 °C • Layer Thickness: From 0.05 mm • Traverse Speed (XY): Approx. 350 mm/s • Servo Motors with Ball Screw Drives in X, Y and Z Axes • Automatic Print Bed Calibration via Multi-Point Topography Measurement • Vacuum Print Bed • Water-Cooled Triple DSD Print Head • Adjustable Feed and Contact Pressure • Short Filament Feed Path • Free Lift of the Inactive Extruder/Nozzle • E1: Standard Hotend • E2: Backup Hotend (Filament Run-Out Detection) • E3: High-Flow Hotend (Extra-High Material Deposition Rate) Ijdpfxezk E Ekj Afhjig • Heated Build Chamber Suitable for High-Temperature Plastics • 360° Component Temperature Management • Targeted Part Cooling up to 4.8 m³/h • Activated Carbon and HEPA Filtration System • Highly Effective Filtration of Macro-, Micro- and Nanoparticles (VOCs and Volatile Solvents) Drying Chamber (DCU), 2024 (optional, not included) • Internal Dimensions (X/Y/Z): 630 × 390 × 260 mm • Capacity: 3 Movable Small Spools (Upper Section) • Capacity: 2 Movable Large Spools (Lower Section) • Maximum Drying Temperature: 100 °C • Filament Feed: Direct Feeding from the Chamber with up to 4 Spools • Automatic Air Exchange and Moisture Removal • Tempering Chamber Internal Dimensions (X/Y/Z): 418 × 601 × 401 mm • Loading Areas: 3 Loading Positions for 600 × 400 mm Sheets or Grids • Maximum Tempering Temperature: 200 °C • Simultaneous Operation of Drying and Tempering Chambers • External Dimensions (X/Y/Z): 1,600 × 695 × 580 mm • Total Weight: Approx. 100 kg • Control: Siemens LOGO! • Maximum Power Consumption: 6 kW • Electrical Connection: Three-Phase AC 230 V, 16 A Fuse per Phase

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Iedpjxv Abgefx Afhjig Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: Iiodpfx Aex R Umtjfheg WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. Iodpfx Afsykq D Hjheig The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Iodpfxjykvdle Afhsig Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: good (used), Year of construction: 2023, functionality: fully functional, space requirement height: 4,200 mm, power: 3 kW (4.08 HP), Equipment: documentation/manual, Automatic Rotary Dryer C2M RED – 11 m³ – Year of manufacture: approx. 2022/2023 – Very good condition For sale are three automatic rotary dryers, model C2M RED, each with a volume of 11 m³, including conveyor systems for infeed and discharge as well as a central control system. The units have only been in seasonal use for a few cycles and are in excellent technical and visual condition. Technical data (per dryer): • Drying volume: 11 m³ • Throughput: approx. 11 m³ dried fruit per day • Diameter: 2.30 m • Height: 3.80 m to 4.20 m • Fan output: 2.2 kW • Motor (screw conveyor) + burner: 0.55 kW • Burner output: 40 kW Ijdpfx Aow Hynujfhsig Energy consumption: approx. 20–35 kg gas per m³ dried product Special features: • Fully automatic three-stage drying process (preset, adjustable depending on product) • Automatic shut-off upon reaching target moisture level • Uniform drying thanks to continuous mixing via screw conveyor drive • Prevents moisture pockets or overdrying • Display of drying level, gas consumption, and operating time • Central control unit to operate up to 10 dryers simultaneously Included accessories: • Conveyor belts and elevators for filling and emptying (conveyor belt/unit: €4,000) • Central control system • Support frames, mounting parts • Documentation available Suitable for: Walnuts, hazelnuts, almonds, apricot kernels, chestnuts, and other suitable products for drying. Location: Austria Availability: Immediately Price: Drying chamber (of three available): €15,000 each; conveyor belt per unit: €4,000 If you have any questions, require further technical details, or would like to arrange a viewing, please feel free to contact us.