Used Pump Control for sale (51,747)

Condition: used, This listing is for a B.BRAUN Unita perfusor/ syringe pump with mechanical display. SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. The Perfusor is a medical syringe infusion pump designed for precise controlled delivery of medications and fluids to patients. These devices are commonly used in critical care, anaesthesia, emergency, operating theatre, neonatal, paediatric, and adult intensive care environments to administer small-volume infusions (e.g., sedatives, analgesics, vasopressors) where accuracy is essential. Listing name: B.BRAUN Unita S 871042-2 Perfusor/ Syringe Pump Pgedpfx Abexzibweusu

Condition: used, Vacuubrand Type: MV 10C EX VARIO VACUUBRAND VARIO chemical diaphragm pump Technical data: Max. pumping capacity 50 Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum gauge / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Pgodpfozgci Sex Abueu Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Rated speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Busch Vacuum Pump Podswa Nzqspfx Abuogu Model 630 370 CFM

Condition: good (used), Busch Vacuum Pump Model 400 Pgjdpfx Aewa Ra Uobuju

Condition: good (used), Busch Vacuum Pump Pgodpfjwa Ucgsx Abueu Type: 400-212 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: good (used), Busch Vacuum Pump Model 400-212 Pgsdpfxjwa Unps Abusu

Condition: used, Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional leak testing, sniffing & vacuum operation with pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Description: For sale is a professional Pfeiffer Vacuum HLT 560 helium leak detector. The device is designed for highly precise leak testing using helium and is typically used in Pgsdpfxozix Hxo Abuou industry, manufacturing, quality assurance, laboratories, and technical service. It is suitable for the reliable detection of even the smallest leaks. The HLT 560 operates using mass spectrometry and can be used in both vacuum and sniffing modes. With the sniffing probe, leak locations can be precisely identified, while in vacuum mode, complete assemblies or systems can be tested. The turbo pump and pre-pump are integrated, making the device usable as a complete, mobile testing system. Application areas (examples): Leak testing of components and assemblies Testing of vacuum chambers, pipelines, valves, heat exchangers Quality control in production Service and maintenance work on vacuum equipment Technical data: Manufacturer: Pfeiffer Vacuum Model: SmartTest HLT 560 Manufacturer: Pfeiffer Vacuum Integrated turbo pump Pre-pump: Vacuubrand MV 10 NT (max. approx. 10–11 m³/h) Measuring gas: Helium Measuring principle: Mass spectrometric helium leak detection Operating modes: Vacuum mode / Sniffing mode Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge connection Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 70 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2022, condition: like new (used), Celeros HL250-200-315 Centrifugal pump Psdpfx As Ad Rh Ijbusgu 2022, Unused, rev 1480 min, flow rate 495 m3h, with manual

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m Pgsdpfxet A U H Io Abusu -electrical data: 400V; 30kW

Year of construction: 2023, condition: like new (used), Seepex BM70-6L Progressive cavity pump Pedps Ad Rk Ajfx Abujgu 2023, unused in crate, block type progressive cavity pump designed to handle low viscosity to highly viscous media, sludge and fluids with solid particles, 11Kw,

Condition: used, METTLER TOLEDO AutoChem Fluid Control Module / Fluid Handling Module Mettler Toledo AutoChem FCM Fluid Control Module with integrated FCM-1200 Modifier Fluid Pump For sale is a used AutoChem Fluid Control Module from the manufacturer Mettler Toledo. The device is intended for use in corresponding AutoChem systems as well as for laboratory, reaction, dosing, and fluid handling applications. Technical data: Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Device type: AutoChem Fluid Control Module Power connection: 220 VAC Power frequency: 50 / 60 Hz Fuse: 4 A Time Delay Dimensions: approx. 450 × 650 × 550 mm (W × D × H) Weight: approx. 50 kg Integrated pump: Mettler Toledo FCM-1200 Modifier Fluid Pump Part Number: 16001176 Interfaces: Pjdpfjzt Nzhox Abuegu 2 × REMOTE 1 × GPIB Fluid connections on the front and rear Front connections: INLET OUTLET Status indicators POWER ON and NOT READY Equipment: FCM-1200 Modifier Fluid Pump Integrated fluid lines Fluid fittings and valves INLET and OUTLET connections REMOTE interfaces GPIB interface Status indicators IEC power connection Metal housing with service panel Accessories as shown in the pictures Application areas: Mettler Toledo AutoChem systems Laboratory automation Reaction systems Fluid handling Dosing applications Process automation Research and development Scope of supply: 1 × Mettler Toledo AutoChem FCM Fluid Control Module Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, functionality: fully functional, overall weight: 260 kg, volume flow: 65.3 m³/h, power: 22 kW (29.91 HP), GRUNDFOS NKE 40-250/255 stainless steel centrifugal pump – 22 kW – integrated VFD – new/unused New, unused Grundfos industrial centrifugal pump with integrated variable frequency drive. Complete assembly with motor, coupling, coupling guard and steel baseplate. Stainless steel pump casing and impeller, suitable for water transfer and various industrial pumping applications. Technical specifications: Type: NKE 40-250/255 A2F2KE-SBQQE Product number: 97701889 Motor: Grundfos MGE, 22 kW Supply: three-phase 380–480 V, 50/60 Hz Nameplate duty point: 65.3 m³/h at 78 m head Speed at stated duty point: 2,940 rpm Nameplate pressure/temperature rating: 16 bar / 120 °C Stainless steel casing and impeller: EN 1.4408 Shaft seal: BQQE Motor efficiency: IE3, 92.7% Protection rating: IP55; insulation class F Control interface: PUMP I/O, GENI/RS485 Condition: new/unused surplus stock. Supplied as pictured. Psdpfxj Aaw Rhe Abuogu

Year of construction: 2021, condition: excellent (used), Fristam FPE742/190A Centrifugal pump 2021, 13.5 M3/h, 2900 1/min, with brand new ABB 5.5Kw motor, 3Ph Pgedj Ad Rhzspfx Abuou

Condition: used, 3D MICROMAC Type: microCUT laser marking system microCUT Enclosure IPG laser source Raylase 3-axis scanning system Power measurement head 1 Power measurement head 2 Camera system for positioning Camera system for quality inspection Cooler Extraction system Control cabinet with IPCs Coolant distributor Machine dimensions: Pedpfezdqp Iox Abuegu Machine weight: 2 tons Width 922 mm, Depth 4653 mm, Height 2925 mm Components: Extraction system: Height 2869 mm, Width 760 mm, Depth 1577 mm Cooler: Height 1697 mm, Width 1440 mm, Depth 860 mm Weight (without filling) 500 kg Laser rack: Height 1786 mm, Width 856 mm, Depth 806 mm Weight 500 kg Control cabinet: Height 2001 mm, Width 1616.05 mm, Depth 605 mm Machine connections: Electrical: Mains voltage 3*400 VAC/N/PE Mains current consumption 74A Frequency 50/60Hz Power consumption 51.3kW Control voltage 24/5VDC Main fuse NH 100A gG Modules: Laser source: Mains voltage 400 VAC Frequency 50/60Hz, Power 16.7 kW, Current consumption 59A Cooler: Mains voltage 400V, Frequency 50/60Hz, Current consumption 40A Machine: Consumable media Working pressure 6-10 bar Temperature 10-50°C Quality ISO 8573-1 Solid particles: Class 1 Oil: Class 1 Water: Class 4 Residual oil content < 10µg/m³ Water content < 6 g/m³ Pressure dew point 3 °C Consumption < 120 l/min Cooling water cooling unit module: Cooling water outlet temperature 21°C Cooling water return temperature 26°C Setpoint tolerance 1K Cooling water flow rate 69 l/min Free pump pressure 1.5 bar DI water cooling unit Cooling water outlet temperature 26°C Cooling water return temperature 31°C Setpoint tolerance 1K Cooling water flow rate 10 l/min Free pump pressure 1.5 bar Laser source manufacturer IPG Type: YLS-5000 Mode Continuous, Quasi-continuous Wavelength 1070nm Power 5kW Frequency 5 kHZ Scanner manufacturer Raylase AG Type: Axialscan-30-Y Field size 1000x1000 mm Spot diameter 87 1/e²(µm) Resolution < 31 µm Working distance 1198 mm Cooling unit: Manufacturer Riedel Type: PC 250.01-NZ-DI-S Refrigerant R407C 50 Hz Net cooling capacity 38 kW 60Hz Net cooling capacity 40.3 kW Camera system: Manufacturer e2V Type: AVIIVA TM UM2 GE Quality cameras: Manufacturer e2v type: DiViiNA LM1 CL Extraction system: Manufacturer Donaldson Filtration Type: DOWNFLO Oval 3-3 Max. Fan speed 3000 rpm Working pressure: 4.2 bar Pulse duration 100ms Volume of the pressure vessel 92 l Type: microCUT laser marking system Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2023, condition: excellent (used), Lowara 66SV02 Vertical multistage centrifugal pump Psde Ad Rirjpfx Abuogu 2023, unused in box, vertical multistage centrifugal pump, 7.5Kw motor, 2900 1/min, 3Ph

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Pjdpfoyi H Eqox Abuogu Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Year of construction: 2017, condition: excellent (used), Pomac CPC21066 Centrifugal pump Pgedpfx Aj Ad Rhbobueu 2017, unused, hygienic single stage centrifugal pump, ideal for food, beverage, pharmaceutical and chemical applications, 11Kw motor, 45m3h, with manual, 70mm inlet and outlet, 3Ph

Condition: used, Autotherm Type: Autotherm temperature control unit AWF 130-27/VK/6K 6-circuit temperature control unit Without active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1x temperature control in the main circuit Includes 6x temperature measurement in each supply line Includes 6x temperature measurement in each return line Includes 6x flow rate and pressure measurement in each supply line Includes 6x flow rate and pressure control Psdpfx Abozd Rtyouogu 1 l/min .. 12 l/min and 0.1 bar … 3 bar Including changeover control Including frequency inverter-controlled pump in the main circuit Including 6x 3-way valve Includes 6x additional relief valve 2 … 12 bar, adjustable Preset to 2.4 bar Includes filling and draining device For all circuits, jointly/simultaneously Including 50-liter integrated tank Including pneumatic drain function Including S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated into the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site < 20°C chilled water network. The cooling capacity at a supply temperature of +20°C is: 50 kW. This increases the cooling speed in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The footprint of the base unit increases by approx. 0.3 m² according to the data sheet). Assembly in Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, separate enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply. Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated. For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Sold ex-works! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Fresenius Pilot A2 Syringe Pump You are bidding on an original Fresenius Vial Pilot A2 syringe pump (often also referred to as a perfusor). This is a proven, highly precise medical table and stand device for the continuous and precisely dosed administration of medications and infusion solutions. In everyday medical practice, the device is used for the continuous, precisely controlled administration of highly effective medications, anesthetics, or infusion solutions via standard syringes. The device features a clear control panel, a digital display for rate indication, and automatic safety and alarm functions. Thanks to the pre-mounted, robust original bracket on the back, the pump can be quickly and securely attached to infusion stands, intensive care beds, or standardized medical rails. Features: - High flexibility: Automatic detection and compatibility with common 20 ml and 50 ml Luer-Lock syringes (pre-settings for BD Plastipak, Braun Perfusor, and Monoject can be read directly on the housing). - Clear control panel: Wipe-resistant, hygienic foil keyboard with a clear digital LED display for accurate rate indication. - Comprehensive safety system: Visual and audible pre- and main alarms for occlusion, incorrect syringe positioning, power failure, or low battery. Psdpfxo Af Uumj Abusgu - Mobility: Integrated battery for bridging patient transport or sudden power failure. Technical data: Manufacturer: Fresenius Vial SA (Vial Medical) Model: Pilot A2 Device type: Infusion syringe pump (perfusor) Syringe compatibility: Suitable for standardized 20 ml and 50 ml Luer-Lock syringes Flow rate adjustable: from 0.1 to 400 ml/h Accuracy: ± 1% (drive mechanism), ± 2% (syringe) Power supply: Mains operation: 230 V ~ 50/60 Hz Battery operation: Integrated battery (for power failure/transport) Power consumption: Max. 23 VA Dimensions (H x W x D): Approx. 120 x 330 x 155 mm Weight: Approx. 2.2 kg Housing material: Robust, impact-resistant polycarbonate Safety features: Audible and visual alarm systems (e.g., for occlusion/pressure, syringe positioning, power failure, or low battery) Year of manufacture: 2014 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Fresenius Pilot A2 Syringe Pump You are bidding on an original Fresenius Vial Pilot A2 syringe pump (often also referred to as a perfusor). This is a proven, highly precise medical table and stand device for the continuous and precisely dosed administration of medications and infusion solutions. The device is used in everyday medical practice for the continuous, precisely controlled administration of highly potent medications, anesthetics, or infusion solutions via standard syringes. The device features a clear control panel, a digital display for flow rate indication, as well as automatic safety and alarm functions. Thanks to the already mounted, robust original bracket on the back, the pump can be quickly and securely attached to infusion stands, intensive care beds, or standardized medical rails. Features: - High flexibility: Automatic recognition and compatibility with common 20 ml and 50 ml Luer-Lock syringes (presets for, among others, BD Plastipak, Braun Perfusor, and Monoject can be read directly on the housing). - Clear control panel: Wipe-resistant, hygienic foil keyboard with a clear digital LED display for precise flow rate indication. - Comprehensive safety system: Visual and audible pre-alarms and main alarms in case of occlusion, incorrect syringe positioning, power failure, or low battery level. - Mobility: Integrated battery for bridging during patient transport or sudden power failure. Technical data: Manufacturer: Fresenius Vial SA (Vial Medical) Model: Pilot A2 Device type: Infusion syringe pump (perfusor) Syringe compatibility: Suitable for standardized 20 ml and 50 ml Luer-Lock syringes Flow rate adjustable: from 0.1 to 400 ml/h Accuracy: ± 1% (drive mechanism), ± 2% (syringe) Voltage supply: Mains operation: 230 V ~ 50/60 Hz Battery operation: Integrated battery (for power failure/transport) Power consumption: Max. 23 VA Dimensions (H x W x D): Approx. 120 x 330 x 155 mm Weight: Approx. 2.2 kg Housing material: Robust, impact-resistant polycarbonate Pjdpfx Ae Af Uxfsbujgu Safety functions: Acoustic and visual alarm systems (e.g., in case of occlusion/pressure, syringe positioning, power failure, or low battery) Year of manufacture: 2013 "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Fresenius Pilot A2 Syringe Pump You are bidding on an original Fresenius Vial Pilot A2 syringe pump (often also referred to as a perfusor). This is a proven, highly precise medical table and stand device for the continuous and precisely dosed administration of medications and infusion solutions. In everyday medical practice, the device is used for the continuous, precisely controlled administration of highly potent medications, anesthetics, or infusion solutions via standard syringes. The device features a clear operating panel, a digital display for rate indication, and automatic safety and alarm functions. Thanks to the already mounted, robust original bracket on the back, the pump can be securely attached to infusion stands, intensive care beds, or standardized medical rails in no time. Features: - High flexibility: Automatic detection and compatibility with common 20 ml and 50 ml Luer-Lock syringes (presets for BD Plastipak, Braun Perfusor, and Monoject, among others, can be read directly on the housing). - Clear operating panel: Wipe-resistant, hygienic foil keyboard with a clear digital LED display for exact rate indication. - Comprehensive safety system: Visual and audible pre-alarms and main alarms in case of occlusion, incorrect syringe positioning, power failure, or low battery. - Mobility: Integrated battery for bridging during patient transport or sudden power failure. Psdpfx Ae Af Uynobuogu Technical data: Manufacturer: Fresenius Vial SA (Vial Medical) Model: Pilot A2 Device type: Infusion syringe pump (perfusor) Syringe compatibility: Suitable for standardized 20 ml and 50 ml Luer-Lock syringes Delivery rate adjustable: from 0.1 to 400 ml/h Accuracy: ± 1 % (drive mechanism), ± 2 % (syringe) Power supply: Mains operation: 230 V ~ 50/60 Hz Battery operation: Integrated battery (for power failure/transport) Power consumption: Max. 23 VA Dimensions (H x W x D): Approx. 120 x 330 x 155 mm Weight: Approx. 2.2 kg Housing material: Robust, impact-resistant polycarbonate Safety features: Audible and visual alarm systems (e.g., in case of occlusion/pressure, syringe positioning, power failure, or low battery) Year of manufacture: 2012 "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Fresenius Pilot A2 Syringe Pump You are bidding on an original Fresenius Vial Pilot A2 syringe pump (often also referred to as a perfusor). Pedo Af Uyrjpfx Abuegu This is a proven, highly precise medical table and stand device for the continuous and precisely dosed administration of medications and infusion solutions. In medical practice, the device is used for the continuous, precisely controlled administration of highly potent drugs, anesthetics, or infusion solutions via standard syringes. The device features a clear control panel, a digital display for rate indication, and automatic safety and alarm functions. Thanks to the pre-mounted, robust original bracket on the back, the pump can be quickly and securely attached to infusion stands, intensive care beds, or standardized medical rails. Features: - High flexibility: Automatic detection and compatibility with common 20 ml and 50 ml Luer-Lock syringes (pre-settings for BD Plastipak, Braun Perfusor, and Monoject can be read directly on the housing). - Clear control panel: Wipe-resistant, hygienic foil keyboard with a clear digital LED display for accurate rate indication. - Comprehensive safety system: Visual and audible pre-alarms and main alarms in case of occlusion, incorrect syringe positioning, power failure, or low battery level. - Mobility: Integrated battery for bridging patient transport or sudden power failure. Technical data: Manufacturer: Fresenius Vial SA (Vial Medical) Model: Pilot A2 Device type: Infusion syringe pump (perfusor) Syringe compatibility: Suitable for standardized 20 ml and 50 ml Luer-Lock syringes Flow rate adjustable: from 0.1 to 400 ml/h Accuracy: ± 1% (drive mechanism), ± 2% (syringe) Power supply: Mains operation: 230 V ~ 50/60 Hz Battery operation: Integrated battery (for power failure/transport) Power consumption: Max. 23 VA Dimensions (H x W x D): Approx. 120 x 330 x 155 mm Weight: Approx. 2.2 kg Housing material: Robust, impact-resistant polycarbonate Safety functions: Acoustic and visual alarm systems (e.g., for occlusion/pressure, syringe positioning, power failure, or low battery) Year of manufacture: 2011 "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Just Normlicht Proof Control Station Psdpfx Absz N Sifeuegu Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Electronic light control (luminous intensity).

Year of construction: 2023, condition: used, This listing is for a 2023 Thermo Scientific TSCM17PV Controlled-Rate Freezer The unit is in full working condition and ready for immediate use This controlled-rate freezer is a high-quality lab instrument manufactured by Thermo Scientific (Model: TSCM17PV). This 17L system is designed for precise, repeatable cryopreservation of biological samples, ensuring optimal cell viability through controlled cooling rates. It features an integrated thermal printer for data traceability and is suitable for GMP-compliant environments. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Podpfx Abj Advdujujgu specifications_en: Capacity: 17 L; Voltage: 220-230V; Frequency: 50/60 Hz; Amperage: 5.5A; Phase: 1; Includes integrated thermal printer.

Condition: ready for operation (used), Year of construction: 2021, Nordson Hot Melt Glue Pump Type: MESA 6 Pgjdpsy R Ecrefx Abuju Year 2021 Power 200/240 V 50/60 Hz, 15/18 A Dimensions: 750 mm x 350 mm x 570 mm.