Used Rapid 650-M for sale (72,693)

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Itodpjxmt Eqofx Aa Rsl

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Iedpoxnzlhsfx Aa Rjtl Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off • Maximum height when the Z-axis is fully extended: 3107mm Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) • basic package of tool holders included • no bar feeder included (can be purchased optional, price upon request) • no chuck included • retrofits possible (price upon request) Technical Specification Iedpfx Aaszn Uqqj Retl Taper Size ISO 40

Condition: excellent (used), total height: 1,600 mm, total width: 509 mm, total length: 835 mm, Product number: 0026462 Brand: Nissei Model: NA 3338 Rapid Combi Product category: Ice cream machines Length: 835 mm Itsdpfx Aaozbmfus Rol Width: 509 mm Height: 1600 mm Connection value (V): 400

Condition: ready for operation (used), Year of construction: 2017, total height: 1,900 mm, overall weight: 1,260 kg, This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Additional equipment • Pneumatic saw feed • Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders Machine Benefits Qualitative Machine Benefits Itodpfxozvu Npe Aa Rol • The machine ran in two shifts for approximately 3 years and in one shift for the last few years. Technical Machine Benefits • Max blade diameter: 500 mm • Swivel range: manual 45° to 90° • Cutting lengths: 3700 mm Extra Information Drive: 2 x 2.2 kW motors Unit adjustment: Motor-initiated Saw feed: Pneumatic Swivel range: 45-90°, manually adjustable Clamping device: Two horizontal clamping cylinders Control system: Prepared for the attachment of a Rapid control system Fixed center support to support the profiles Saw blades D=500 2x ball screw spindle for unit adjustment Smallest sawing dimension: approx. 310 mm Equipment: DGL-200/R600 ELEKTRONIK with ATV 32 DGL200SE VERT. CLAMP NO. M. AGAINST DGL-200E DGL200TK SHORT T. CONNECTION DGL-200RB Movable roller conveyor, width 215 mm DGL-200E CONNECTION 2.2KW Preparation for FRENIC EXTRACTION CONNECTION Socket connection for extraction up to max. 2.2 kW prepared at the factory DGL200VP - PLANK PACK. FIXED CONTROL PANEL DG1.200 Dimensions Machine Depth 5250 mm

Condition: new, Year of construction: 2024, functionality: fully functional, travel distance X-axis: 1,650 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: FANUC, controller model: 0i-MF Plus 10,4", total height: 3,438 mm, total length: 4,400 mm, total width: 3,900 mm, table width: 800 mm, table length: 1,700 mm, overall weight: 13,000 kg, spindle speed (max.): 1,200 rpm, coolant supply: 30 bar, distance table center to spindle nose: 920 mm, spindle motor power: 25,000 W, spindle nose: ISO 40 (DIN 69871), number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, New vertical machining centre equipped with a FANUC 0i-MF Plus control, 10.4" display, including Manual Guide I and AICC II. Iedpfx Aszw Ex Doa Retl Table measuring 1,700 × 800 mm with a permissible load of 2,000 kg/m². Axis travels of 1,650 mm in X, 800 mm in Y and 800 mm in Z. Table-to-spindle-nose distance from 120 to 920 mm; spindle centre to column 882 mm. Cutting feed of 1 to 15 m/min, with rapid traverse rates of 36 m/min on the X and Y axes and 24 m/min on the Z axis. Direct-drive DDS spindle with ceramic bearings, 7/24 steep taper ISO 40 to DIN 69871, 12,000 rpm and a power rating of 15 to 25 kW. All three axes run on roller-type linear guideways (PMI, Taiwan) with preloaded ball screws. Swing-arm automatic tool changer with 24 stations, accepting tools up to 80 mm in diameter, 300 mm in length and 8 kg in weight. Through-spindle internal coolant supply at 30 bar with filtration unit, oil/coolant separator, hinged-belt chip conveyor combined with two screw-type chip augers, and a rear chip flushing system with coolant gun. Fully enclosed splash guarding with interlocked front door, spindle oil chiller, heat exchanger, automatic centralised lubrication and air-conditioned electrical cabinet. Rigid tapping cycle, eight open M-functions, data server with Ethernet connection and 2 GB memory card. Three-colour signal light, dustproof electrical system, spindle air seal and levelling bolts with pads. Machine supplied without counterweight. Power supply via a 400 V / 50 Hz three-phase transformer rated at 30 kVA; compressed air requirement 6 to 8 bar. Overall dimensions 4,400 × 3,900 × 3,438 mm, extending to 5,500 mm in length with the chip conveyor fitted. Machine weight 13,000 kg. CE certified.

Condition: used, Double-miter saw RAPID, type DGL 5000 / 500 Requires repair – control system is not functioning Year of manufacture: 1993 Cutting length: 5000 mm Shortest section length: 350 mm Saw blade diameter: 500 mm - Control system is not functioning - Exposed metal parts partially show surface rust Ijdpfxsyxy S De Aa Retl Space required (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are clearing space Affordable machine – ideal for export

Condition: reconditioned (used), Year of construction: 2016, operating hours: 830 h, functionality: fully functional, working width: 650 mm, area performance: 3,500 m²/h, overall weight: 447 kg, warranty duration: 12 months, water tank capacity: 75 l, HAKO SCRUBMASTER B75 R TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2016 with 830 hours of operation 650mm cleaning head (TB650) equipped with new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A new rubber guard around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction nozzle working width (mm): 860 Working speed (km/h): 5.5 Tank capacity (l): 75/75 Number of brushes (pcs): 2 Brush speed (rpm): 180 Efficiency (m²/h): 3500 Ijdpszb I Nbsfx Aa Rotl Gradeability (%): 10 Weight (kg): 447 W INCLUDED IN THE KIT: NEW 6V 175Ah SIAP GEL BATTERIES (4x) NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (2x) NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: used, all stainless steel belt width : 650 mm flip-over 90-200 mm total dimensions: (l x w x h) : ± 2.100 x 1.300 x 1.450 mm Isdpfjzzaprox Aa Rotl 3 x 400V, 50Hz, 0.5kW mobile

Condition: good (used), Year of construction: 2013, grinding diameter 390 mm grinding length 650 mm centre height 200 mm control Siemens 840D total power requirement 46 kW weight of the machine ca. 6 t dimensions of the machine ca. 3x3x2,4 m Universal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mm EMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers the right solution for virtually every user. --> Technical data Max. grinding length: 650 mm --> Centre height: 200 mm --> External grinding diameter: 1 – 390 mm --> Max. weight flying MK4: 100 kg --> Max. workpiece weight between centres: 250 kg --> Feed: --> X-axis travel: 480 mm --> Z-axis travel: 1.150 mm --> Workpiece headstock --> Tailstock --> Grinding spindle headstock --> Coolant device, manufacturer HYFRA, --> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012, --> Oil mist filter, manufacturer Cobaron Here are a few specifications for the machine: - Grinding length / max. workpiece length: 650 mm - Max. workpiece diameter: 400 mm (center-to-center distance: 200 mm) - Workpiece headstock: MK4, speed up to 600 rpm, continuously adjustable - Hydraulic NC tailstock with 150 mm stroke, MK4 Itedpfx Aajw Inr Ne Rsl - 2 external grinding spindles—1 wheel on the left, 1 wheel on the right—B- axis infinitely adjustable - Grinding wheel peripheral speed: 50 m/s - Grinding spindle motors: 7.5 kW each, toothed belt drive - Machine dimensions (without external peripherals): Width 4130 x Depth 2400 x Height 2300 mm - No rotating dressing device for CBN grinding wheels; only a holder for a stationary dressing tile

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Itjdpsu E E D Dsfx Aa Rol Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg With full Documentation and CE. Very good condition, fully working!

Condition: used, Year of construction: 2003, functionality: fully functional, HORIZONTAL MACHINING CENTER "FAMUP" MOD. MF 650 Iodpfx Aaexwccmj Rotl CNC FANUC SPINDLE HSK 63 15,000 RPM TRAVELS MM 700X660X550 PALLET MM 500X500 FULL ROTARY TABLE ATC 50 POSITIONS HIGH-PRESSURE COOLANT CHIP CONVEYOR YEAR 2003

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic Ijdpfxezrpr Dj Aa Rotl cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads Itedpfex Hzzcex Aa Rol - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: good (used), Year of construction: 2002, functionality: fully functional, Bone saw Berkel / Mado MKB 650 16A. 380V. Workshop-tested, defects corrected. Motor brake. Saw blade new. Year of manufacture: 2002 Inspection and test run possible by prior phone arrangement! Cash or advance payment! Iodsy Du T Tjpfx Aa Retl Sale only to commercial customers, no warranty, no guarantee.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Itsdpfszu Ixnjx Aa Rel Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: excellent (used), Year of construction: 2021, Bed Dimension 1,270mm x 254mm. (3 'T' Slots 16mm x 63mm). Maximum Table Load 350Kg. Axis Travel 'X'=750mm, 'Y'=384mm, 'Z'=406mm. Quill Travel 115mm. Spindle Taper SK30. Spindle Speed Range 60-4,200rpm (Motor 2.25KW). Powered Drawbar. S/No. 13279 (2021) Please note a loading charge of £50 + VAT to be added to buyer's invoice. Itjdpfx Aajz Dg H He Rjl With Coolant System, Quantity Of Assorted Toolholders, Table Guarding, Drawbar, Work Light & Manual. Approx Dimensions L3,220 x W2,580 x H2,180mm. Weight 1,250kg.

Condition: used, Year of construction: 2009, Edge banding machine Manufacturer: IMA Type: Novimat/I/G80/650/R3 Year of manufacture: 2009 Technical data - Workpiece overhang from the chain conveyor: 38 mm - Feed width: min. 65 mm (with max. workpiece thickness of 25 mm) - Workpiece length in feed direction: 150 mm - Overall height (top edge of chain conveyor): 960 mm - Feed speed: approx. 6 - 30 m/min, electrically adjustable - Machine control system ICOS open compact Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Workpiece thickness: 8 - 40 mm (with edge trimming function) / 60 mm (without edge trimming function) - Smallest workpiece: 150 x 150 mm or 65 x 300 mm - Edge material: paper, plastic and veneer - Height: 14 - 65 mm - Roller material thickness: 0.3 - 3.0 mm (veneer edges limited to max. 1.0 mm) - Max. upper edge overhang: 5 mm Units Infeed area - Release agent applicator mounted at the top and bottom, not adjustable Edge trimming - 2 motors 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - Motor 1 counter-rotating - Motor 2 co-rotating Gluing unit VTG 3-6 - with one preheating nozzle 300 mm for preheating the workpiece edge - 6-position edge magazine for roller material 0.3 - 3 mm thick. - 1 driven main pressure roller and 4 pressure rollers, with scraper, pneumatically adjustable Glue application - with pneumatic quick-lock system - Chem-Coat coating - electronic temperature control - Volume 0.8 l Pre-melting tank approx. 1 l - Heating power 3 x 400 W - with EVA glue, approx. 7.0 kg/h - with filler-free glue, approx. 5.0 kg/h Cutting unit - 2 motors 660 W, 200 Hz - incl. frequency inverter with braking function - pneumatic pivoting 0+25 for straight and bevel cutting Flush trimming - 2 motors each 1000 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function Multi-profile trimming unit - 2 motors each 660 W, 400 V, 200 Hz, 12000 rpm - with HSK 25 shank - incl. frequency inverter with braking function - for trimming 4 profiles - with stepper motor axes for horizontal and vertical positioning Contour trimming unit KFA x30 - 1 motor 500 W, 400 V, 400 Hz, 18000 rpm - Program-controlled conversion for up to 4 profiles - incl. fine positioning for different edge thicknesses Multi-profile scraping blade - Stepper motor axes for horizontal and vertical positioning - Scanning from above and below (max. 4 profiles) - Scanning from the side via pneumatic pressure Spray nozzles at the top and bottom for applying cleaning agents - fixed, not adjustable Surface scraping blade - with height sensing skid - electronically controlled horizontal positioning Buffing unit - 2 lower and 2 upper motors, 180 W, 50 Hz, 1400 rpm - 1st motor pair with cloth-sisal discs 50x160x19 mm - 2nd motor pair with polishing discs 50x160x19 mm - The motors operate in the same direction and are both tilted and pivoted in the feed direction. - Each motor can be individually adjusted vertically 2x NC-controlled grooving - 2 milling motors each 4.5 kW, 150 Hz, 9000 rpm - incl. frequency inverter with braking function - one manual 90-degree pivoting device from 180 -270 with co- and counter-rotating function - Horizontal, stepless adjustment with AC servo motor for grooving unit Workpiece return Note: The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is non-binding. Itedpfxezuyi Es Aa Rsl

Condition: ready for operation (used), Year of construction: 2017, A continuous servo side sealing machine IFP for the food industry is available. Packaging capacity: 100 packages/min, max. sealing dimensions: 650mm, max. sealing length: unlimited, film material: PP/POF/PVC, max. film reel width: 800mm, max. film reel diameter: 350mm, working height range: 870mm-930mm, output: 9kW, machine dimensions X/Y/Z: approx. 1800mm/2650mm/1500mm, control: Siemens. Documentation available. On-site inspection is possible. Isdpfjvf Iydex Aa Rjtl

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Features Outstanding image quality Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production User-friendly touchscreen interface Iodpfjurbwxsx Aa Retl Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Available for inspection OPEN TO OFFERS

Condition: good (used), Year of construction: 2010, operating hours: 115,503 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, torque: 100 Nm, controller manufacturer: Fanuc, workpiece width (max.): 670 mm, workpiece weight (max.): 1,000 kg, total height: 2,940 mm, total width: 2,750 mm, table width: 670 mm, table length: 1,400 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 8 bar, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 420 V, type of input current: three-phase, Equipment: documentation/manual, BT 40. No chip conveyor. Ijdpfsyx U Nwjx Aa Retl

Condition: reconditioned (used), Year of construction: 2015, operating hours: 1,618 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, Hako Scrubmaster B70 CL TB650 scrubber-dryer New SIAP 6V 175Ah gel batteries (4x) 2015 model year; 1,618 operating hours 650mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water extraction power from the squeegee Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP gel batteries (x4) NEW 330mm PPL 0.5 disc brushes (x2) NEW 24V 600W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. The wide working width (650 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate. Iedpfoz A Dmnox Aa Rjtl

Year of construction: 1999, condition: ready for operation (used), A large-format injection molding machine Krauss Maffei is available. Clamping force: 6500kN, tie bar spacing X/Y: 1000mm/930mm, platen dimensions X/Y: 1530mm/1450mm, max. opening stroke: 900mm, mold height range: 350mm-650mm, max. platen spacing: 1550mm, ejector stroke: 250mm, ejector force: 110kN. Machine dimensions X/Y/Z: approx. 10000mm/2800mm/2450mm, weight: approx. 46000kg. Including a Wittmann handling unit. Documentation available. An on-site inspection is possible. Isdpjzc Rd Dsfx Aa Rotl

Condition: good (used), Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130 Iodpfxoyg N Hls Aa Rstl

Condition: ready for operation (used), Year of construction: 2009, operating hours: 8,500 h, functionality: fully functional, fuel: diesel, IDROMEC 650 diesel engine plus generator, ready to use Itodpfeyg Hcdex Aa Rsl