Used Ruhrmann Eccentric Press - Single Column for sale (23,031)

Condition: used, Year of construction: 1979, pressure:64 t throat:315 mm stroke:8-100 mm no. of strokes:140 Hub/min table surface area:820 x 630 mm Lajdpecxxmfefx Anxsg table height over floor:800 mm ram stroke - adjustable min/max:8-100 mm ram - range of adjustment:63 mm total power requirement:7,5 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:1,45 x 1,70 x 3,10 m

Condition: new, Year of construction: 2024, pressure 20 t Lsdpfxjvfhp Ss Anxeag throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 50 t throat 230 mm stroke 12-110 mm no. of strokes 40-100 Hub/min ram - range of adjustment 70 mm Ledpfx Anevfhqpjxeag table surface area 740x440 mm table height 840 mm hole in the table Ø 140 mm ram surface 460x300 mm tool hole in ram Ø 45 mm total power requirement 4 kW weight of the machine ca. 3,4 t dimensions of the machine ca. BxTxH 1500x2500x2510 mm

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel Ledpetrhf Ajfx Anxsag - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Lasdpfevvx Exsx Anxjg Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm Ledpfx Aofx Hv Henxsag dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm Lasdpfx Anevfhpxjxsg

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm Ledpfx Anovfhqijxsag stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm Lasdpfx Anevfhqvjxjg

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm Laodjvfhq Aepfx Anxeg no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm Ledpfxovfhp Eo Anxjag tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, Year of construction: 1990, pressure 35 t no. of strokes ca 72 Hub/min dayligth 195 mm total power requirement 1,5 kW weight of the machine ca. 330-400 kg Ledpfxeztf Ans Anxsag

Condition: used, Year of construction: 1988, pressure 200 t throat 450 mm stroke 30 - 140 mm table surface area 1100 x 850 mm dayligth 500 mm ram surface 800 x 600 mm ram adjustment 110 mm Ljdpfxovb I Ito Anxjag tool hole in ram Durchm. 65 x Tiefe 105 mm no. of strokes 45 Hub/min total power requirement 15 kW weight of the machine ca. 14,2 t dimensions of machine L x W x H 3,18 x 2,09 x 3,05 m

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Lodpeyath Tjfx Anxsag Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, Ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Laodpfx Anjz D Hzdoxog

Condition: used, pressure 130 t throat 450 mm stroke 20 - 200 mm max. distance table - ram at biggest stroke 500 mm no. of strokes 80 Hub/min Laodpfszupkfsx Anxeg ram adjustment 110 mm table surface area 1400 x 880 mm ram surface 900 x 450 mm total power requirement 11 + 2,2 (Hydraulik) kW weight of the machine ca. 14 t dimensions of the machine ca. BxTxH 1,55 x 2,68 x 3,46 m Features: - hydraulic clutch - hydraulic overload protection - hydraulic ram adjustment - cam-operated shift mechanism - enlarged table The machine is being partially overhauled at our facility as follows: - complete disassembly and inspection - new paint job - new main drive - new separate control cabinet with touch panel, including machine wiring - Left/right work area enclosure with safety light curtain and cycle operation - New two-hand control panel on a separate stand

Condition: used, Year of construction: 1996, pressure 45 t throat 230 mm stroke 0 - 160 mm no. of strokes 120 Hub/min ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,95 t Lasdpfxjykb Dwe Anxog

Condition: used, Year of construction: 1990, machine/vehicle number: 9417, functionality: fully functional, operating hours: 85,640 h, power: 28 kW (38.07 HP), input voltage: 380 V, input frequency: 50 Hz, pressing force: 50 t, stroke length: 51 mm, total length: 1,820 mm, total width: 2,890 mm, total height: 3,090 mm, Pressing force: 50 t Adjustable ram stroke: 16 - 51 mm (currently fixed at 51 mm) Ram adjustment: 64 mm Table clamping surface area, approx.: 930 x 590 mm Ledpfszp Ukyex Anxsag Number of strokes per minute: 100 - 750 min-1 Power consumption: 28 kW

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm ram adjustment 63 mm Ljdpfx Asztfz Renxjag weight of the machine ca. 2600 t

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system Ledpfx Anjxabvksxoag - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW Ljdpfxsxabrrs Anxsag weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm

Condition: new, pressure 10 t throat 160 mm stroke 0 - 40 mm table: 270 x 370 mm table: 100 mm - Bohrung no. of strokes 200 Hub/min Lasdpjxaad Hsfx Anxog bore 25,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 180 mm total power requirement 0,75 kW weight 590 kg range L-W-H 1.168 x 1.010 x 1.670 mm

Condition: used, Year of construction: 1970, functionality: fully functional, pressing force: 100 t, overall weight: 4,000 kg, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden Laodpfx Anevxltbexeg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min Lajdsy Tvdxepfx Anxjg - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: good (used), Year of construction: 1973, machine/vehicle number: 727173, Offer 25450 Technical Data: - Pressing force: 100 t - Throat depth: 300 mm Lodpexxvzlsfx Anxsag - Table size: approx. 650 x 450 mm - Table height adjustable - Pass-through hole in table: approx. 200 x 100 mm - Max. installation height: approx. 450 mm - Ram surface: 70 x 140 mm - Pin hole in ram: 40 x 80 mm - Ram adjustability: 60 mm - Stroke adjustment: 10 - 100 mm - Strokes per minute: 80 /min - Pneumatically assisted clutch - Drive: 380 V / 5.5 kW - Space requirement (approx.): W 1350 x H 2550 x D 1600 mm - Weight (approx.): 5000 kg