Used Servo 4-Axis for sale (66,709)

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC O/N RA8616-0Y4A-46 S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Kdsdpfswywi Ajx Aqiet Weight: 8.5 kg Used, in very good condition

Year of construction: 2023, condition: excellent (used), Number of NC axes: 4 X-axis: 7200 mm Maximum tool length: 190 mm Number of tool positions in the tool magazine: 12 Number of clamping mandrels: 8 Kdodpfx Aezycltsqiot Number of fixed stops for profiling: 4 Clamping block positioning: Automatic Maximum profiling height: 300 mm Motor power: 7.5 A-axis: +/-90° continuous

Condition: used, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO, type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical travel via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw drive Guide type: ball bearing guide, size 20 Payload: 60 kg Maximum speed of ball screw spindle: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Kdjdegf Ix Aepfx Aqijt Current consumption: max. 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide slide - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition A virtually identical linear unit is available under storage number 59702.

Condition: used, Year of construction: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° mm control: Siemens 840 D number of spindle speeds: max. 15 000 U/min tool clamping: System nach DIN 69893 tool taper: HSK-A63 tool changer magazine: chain magazine: 12 places Stück traversing speed: x/y/z Axis: 40 total power requirement: 195 kW weight of the machine ca.: 13,0 t Traveling Column Milling Machine - the tool changing unit consist of 3 -NC axis and 1 NC- rotary table axis - ATC ( with magazine) - rotary table Type SKH-NC 4/029, diameter=460mm , table surface plate Ø 500 x20mm, revolution per minute max. 22 rpm - control panel SIEMENS - Spindel-Typ: DRF-WE-255-N-W-15-30, 15000 U/min., Spindelleistung = 30 kW Kdjdeu Idl Sopfx Aqiot - chip conveyor Make Knoll type 400K-3/280, ejection height 1150mm - cooling system for spindle make SCHIMBKE Type DK 80V, 3,36 kW i.D. *

Condition: used, Makatrol Smart Control Kdjdpfx Aezilpmeqiot Serial Number 254702 YOM 2014 EIA & Mazatrol Programming Full Factory 4th Axis 30 Tool Magazine CAT Tooling USB Ports No swarf conveyor or thru coolant UK Buyers - Price £39,000 +VAT Carriage/delivery is additional

Condition: used, Year of construction: 2022, machine/vehicle number: 13180, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Kdedpfxjz Aa E No Aqiot Technical data: - Year of construction: 2022 - Serial number: 13180 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2021, machine/vehicle number: 12986, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 12986 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request. Kedpfjz Aa Ecex Aqiodt

Condition: used, Linear guide, portal axis SCHNEIDER ELECTRIC / FESTO Electric slide Ksdpow Uc Tzefx Aqiodt Motor type: ILS1B571PC1A0 Year of manufacture: 2010 Axis travel: 300 mm Power supply: 36 Volt (DC) Carriage: 86 x 54 mm - Synchronous servo motor / stepper motor SCHNEIDER ELECTRIC, type: ILS1B571PC1A0 - Linear guide FESTO, type EGSK-33-300-6P - Ball screw Ø 10 mm, pitch 6 mm - 2 adjustable position sensors Dimensions L x W x H: 580 x 120 x 57 mm Weight: 6.5 kg in good condition

Condition: used, Technical details: x-travel: 1000 mm y-travel: 600 mm Kdedpfx Aoyfgiusqist z-travel: 650 mm control: Siemens 810D shopMill distance spindle /table: min 130mm / max. 780 mm number of spindle speeds: 10000 U/min. spindle taper:: SK 40 tool changer with: 24 Plätze table-size: 1160 x600 mm interface: ja Weight approx.: 5,45 t Machine YOM in 2007 / only put into operation in 2009! 4th axis Oil mist extractor *

Condition: used, Year of construction: 2021, machine/vehicle number: 13900, functionality: fully functional, DENER B-Servo 40-130 CNC servo-electric press brake. Technical data: - Year of construction: 2021 - Serial number: 13900 - Bending force: 40 t - Working length: 1300 mm - Back gauge: X + R axes - Tooling style: Eurostyle / AMADA Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request. Ksdpfoz Aa Eiox Aqijdt

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: C112161, Emmegi Phantomatic X4 CNC machining centre for aluminium, PVC and light-alloy profiles. Kjdsz Ahzrepfx Aqisdt Fully functional and can be seen running. The machine is attractively priced, as we are currently reorganising our workshop and need to free up production space. We can assist with packing and loading the machine for transport. Information: - Machine cabinet width: approx 1,600 mm (+600 mm for HMI) - Machine cabinet lenght: approx 6,000 mm (including hangouts) - Manufacturing year: 2011 - Serial number: C112161 - 4 axis cabinet machine center - X-axis: 4,300mm - Y-axis: 270 mm - Z-axis: 420 mm - A-axis, spindle rotation from 0° to 180° - Machining on the upper and both lateral faces without repositioning the profile - 7 kW Spindle - Tool holder: HSK-50F - Automatic tool changer with 8 tool positions - Automatic clamp positioning - Pneumatic profile clamping - Windows OS - Emmegi CAMplusCNC software installed - Network connection available for transferring machining programs and production data to the machine - Fully enclosed machining area for safe operation - Machine weight: 2,000 kg Please note: The cooling system pump shown in the last photo is operational but runs relatively warm. We suspect simple worn bearings and recommend servicing or replacing the pump.

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Kdjdpfx Aju Ndbpoqiot Cooling water recooler Hyfra The machine can be demonstrated under power. *

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 4,300 mm, total width: 2,300 mm, total height: 2,960 mm, overall weight: 10,600 kg, feed length X-axis: 600 mm, feed length Y-axis: 270 mm, spindle motor power: 22,000 W, product height (max.): 370 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 220×3200 | 220 T | MTP-3212 | 4 AXES X,Y,R+V The brand-new MTP 220×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system, heavy-duty welded construction, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains Ksdpfx Aqjzg Evhsiodt • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications • Pressing force: 220 T • Maximum bending length: 3100 mm • Distance between columns: 2550 mm • Throat depth: 450 mm • Ram stroke: 270 mm • Maximum opening height: 370 mm • Table height: 920 mm • Controlled axes: X, Y, R + V • Main motor power: 22 kW • Hydraulic oil tank capacity: 200 L • Machine dimensions (L × W × H): 4300 × 2300 × 2960 mm • Machine weight: 10,600 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 750 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Table width: 1,000 mm Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 Dimensions & Weight Installation dimensions (W x D x H): approx. 2.80 m x 2.30 m x 2.75 m Transport weight: approx. 4,700 kg Kodey R Rn Hopfx Aqisdt EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant unit

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Kdjdpfx Asyvqdfeqist Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar Kdjdezx Ehnjpfx Aqiet GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Kdjdsy Ah Tkjpfx Aqiet Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Kodjzlq E Sspfx Aqiedt Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Dimensions: Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: used, 2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot Pick-up device, handling device for presses, lathes, etc. GETECHA, Type GL-20S Serial No. 13836, Year of manufacture 10/2003 Travel range, Z-axis: 1900 mm Travel range, Y-axis: 250 mm Travel speed, Z-axis: max. 1100 mm/sec. Travel speed, Y-axis: max. 227 mm/sec. Continuously variable travel speed in the Y and Z axes via servo motors SMB - Precise axis movement via linear guides - Control system: epis Kjdpeharwyefx Aqiodt - Control panel located nearby - Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25998 hrs. The unit was used as a loader/pick-up device on a press. Space requirement L x W x H: 2900 x 1800 x 2000 mm Weight: approx. 800 kg Good condition

Year of construction: 2010, operating hours: 900 h, condition: excellent (used), functionality: fully functional, AXIS TRAVEL X-AXIS (longitudinal) (mm) 4,300 Y-AXIS (transversal) (mm) 270 Rotary table -90°/90° continuous Kdodpfx Aszq Rn Djqiot ELECTROSPINDLE Maximum power in S1 (kW) 5.5 Maximum speed (rpm) 20,000 Tool clamping cone HSK - 63F AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine 8 Maximum diameter of blade that can be inserted into the magazine (mm) Ø = 180

Condition: new, Year of construction: 2025, feed 2-22 m/min Weight 60 kg Kedpfxovz E Ukj Aqisdt Total power requirement 0,4 kw

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 | 125 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X and Y axes • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel Kdedjzg Dk Dopfx Aqiot The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. ## Technical Specifications • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: used, Year of construction: 2016, functionality: fully functional, Beckhoff Automation Package – C5102, CP2712, AX5203, CX5020, EtherCAT I/O & TwinSAFE Description For sale is a high-quality Beckhoff automation package from an industrial production facility (year of manufacture 2016). All components come from the same system and were operated together until professionally dismantled. This package is ideal as a spare parts stock, for expanding existing Beckhoff systems, or for rebuilding an EtherCAT controller. Scope of delivery (see numbering in the photos): No. 1 – Beckhoff C5102 Industrial PC Intel Core i7-3610QE 8 GB DDR3 RAM 1 TB SATA hard drive Windows 7 Embedded Year of manufacture 2016 No. 2 – Beckhoff CP2712-1002 Panel PC / Touch Panel 12.1" touchscreen Intel Celeron 1.46 GHz 4 GB RAM Windows 7 Embedded Year of manufacture 2016 No. 3 – Beckhoff AX5203-0000-0200 2-axis servo amplifier EtherCAT 2-axis version Year of manufacture 2016 No. 4 – Beckhoff CX5020 Embedded PC with EtherCAT I/O and TwinSAFE station Beckhoff CX5020 Embedded PC Beckhoff EK1122 EtherCAT Junction Beckhoff EL6900 TwinSAFE Logic Several TwinSAFE modules (including EL1904) Several digital Beckhoff EtherCAT input and output modules Completely assembled EtherCAT I/O station with a total of 24 Beckhoff modules The complete package is preferably sold as a set. Total price: €6,490 (negotiable) Kodpfx Aqezrgw Roiedt Individual components can also be sold separately after consultation. Recommended prices for individual sale: No. 1 – Beckhoff C5102 Industrial PC: €1,990 (negotiable) No. 2 – Beckhoff CP2712 Panel PC: €1,490 (negotiable) No. 3 – Beckhoff AX5203 Servo Amplifier: €1,490 (negotiable) No. 4 – Beckhoff CX5020 EtherCAT/TwinSAFE Station: €2,790 (negotiable)

Year of construction: 2026, condition: new, functionality: fully functional, The new KORPLEG PS range: • Multi-axis press brakes (X, Y1, Y2, R, Z) for greater precision and productivity • A robust and durable mechanical design • Very quick and easy operation • Ultra-comprehensive standard equipment • An affordable budget with no hidden costs or surprises Machine equipped with an ESA 630 CNC control system with a 10" graphic display, controlling the 4 axes X, Y1, Y2 and R, plus two external axes, for controlling the machine pressure and the crowning table. • High-precision digital rules for bending (Y1, Y2 axes, controlled by CNC). • CNC-controlled bending pressure regulation • Hydraulic crowning table with CNC-controlled pressure • A complete set of punches, 135 mm height, standard (deer foot), straight or gooseneck (to be specified) • A multi-V die with chain-driven reversal or single-V dies (to be specified) • Quick-release clamps for punches with a push button for quick removal of segmented tools • 2 front part support arms, mounted on linear guides for easy movement Machine equipped with an ESA 630 CNC control system with a 10" graphic display, controlling the 4 axes X, Y1, Y2 and R, plus two external axes, for controlling the machine pressure and the crowning table. THE MECHANICS AND HYDRAULICS DEDICATED TO BENDING • High-precision digital rules for bending (Y1, Y2 axes, controlled by CNC). • CNC-controlled bending pressure regulation • Hydraulic crowning table with CNC-controlled pressure • A complete set of punches, 135 mm height, standard (deer foot), straight or gooseneck (to be specified) Kedpozcyx Dsfx Aqisdt • A multi-V die with chain-driven reversal or single-V dies (to be specified) • Quick-release clamps for punches with a push button for quick removal of segmented tools • 2 front part support arms, mounted on linear guides for easy movement THE REAR MECHANISM: BENDING STOP ASSEMBLY • Rear stop (X-axis), driven by a servomotor and mounted on high-precision (0.05 mm) ball screw linear guides • Height-adjustable rear stop (R-axis), driven by a servomotor and controlled by the CNC. • 4 retractable bending stops that can be moved transversely (Z-axes): 2 manually and 2 with a joystick (Option Z1, Z2 digitized with CNC 640 or 650) OPTIMIZED OPERATOR SAFETY WHILE MAINTAINING GOOD ERGONOMICS: • Side guards with safety barriers and a Class 4 safety module • Rear protection with safety barriers • Assembly with 2 up/down pedals and an emergency stop. • All emergency stops and barriers are connected to a safety module that must be reset in the event of a stop. NUMERICAL CONTROL WITH TOUCH SCREEN: Thanks to the graphics and touch screen, programming and operating a press brake has never been so simple and intuitive. • Making a complex part becomes straightforward • Making simple parts becomes accessible to everyone

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Kedpfx Aezhuyfjqijdt Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks