4-axis bar machining center
elumatec SBZ 140

Name: elumatec SBZ 140
Brand: elumatec
Price: 78000 EUR
Availability: InStock

EXW Fixed price plus VAT

€78,000

Year of construction

2014

Condition

Used (fully functional)

Location

Bretten

4-axis bar machining center elumatec SBZ 140

Machine data

Machine type:: 4-axis bar machining center

Manufacturer:: elumatec

Model:: SBZ 140

Machine number:: 1400040685

Year of construction:: 2014

Condition:: excellent (used)

Functionality:: fully functional

Price & Location

EXW Fixed price plus VAT

€78,000

Location:: Gewerbestraße 22, 75015 Bretten, Deutschland

Call

Details about the offer

Listing ID:: A21699528

Update:: 12.04.2026

Description

Special Features:
Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS
Water-cooled spindle, 9.5 kW S1
3-layer machining possible
Carefully cleaned and overhauled – excellent condition
Hsdpfx Aey Ah Tkodzsn

Description:
Graphical operator guidance and graphical service support
A-axis for stepless machining from above – swivel angle 180°
HSC milling spindle for speeds up to 24,000 rpm
Large machining width
Standard with clamping detection and automatic clamp positioning
8 tool stations
Complete profile machining with stationary profile bar
Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis
Robust, low-wear direct drive
Protective hood
Digital axis controllers for all 4 axes with high-resolution measuring system
4-axis industrial PC control
2 1/2 D interpolation
15" TFT color screen
Network connection RJ45 10/100 MBit
Hard disk
Full PC keyboard
Remote maintenance via TCP/IP (requirement: internet access)

Technical Specifications:

Max. machining length without frontal machining: 7,600 mm
Max. machining length with frontal machining: 7,500 mm (tool-dependent)
Travel X-axis: 7,700 mm
Travel speed X-axis: 65 m/min
Travel Y-axis: 850 mm
Travel speed Y-axis: 60 m/min
Travel Z-axis: 650 mm
Travel speed Z-axis: 60 m/min
Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180°
Positioning accuracy:
X-axis: +/- 0.1 mm / 1 m
Y-axis: +/- 0.1 mm
Z-axis: +/- 0.1 mm
A-axis: +/- 0.1°
Max. spindle speed: 24,000 rpm
Max. spindle power: 9.5 kW S1
Tool holder: HSK F 63
Max. cutter diameter: 80 mm
Max. milling cutter diameter: 200 mm
Compressed air connection: > 7 bar
Voltage: 400 V, 3 PH, 50 Hz
Fuse: 35 A
8 tool stations

Included Accessories:
Tool setting gauge
8 pneumatic material clamps
Automatic clamp detection
Dosing spray device
Protective hood
Front light barrier
Side safety fences (left and right)
Central chip extraction
2 pneumatic material stops
3-circuit clamping system

Length measurement for profile bar
Barcode scanner with wireless transmission
Special version with light barrier

Additional options available on request:
Programming software (office) eluCad, incl. hotline contract for 6 months
3D import license for one machine of category "L"
Data import license package for one machine of category "L"
CSV import license for one machine of category "L"
Macro hashing license for one machine of category "L"

Other information:
The machine is delivered ready for transport, including transport locks, loaded onto truck

Additionally, we optionally offer the following services on request:
Installation and commissioning
Machine training
4/5-axis training package for machine and eluCad

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2005

6 listings online

Call

Send inquiry

Telephone & Fax

+49 7043 ... show

These listings may also fit your interest.

Listing

Gütersloh

869 km

2003 Elumatec SBZ 140
ElumatecSBZ 140

€44,000

Fixed price plus VAT

Call

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Hjdpfouwq S Dsx Adzon Max. Processing length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 RPM Windows operating system minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed fume extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg Very good condition

See details

Listing

Light metal / aluminum circular saw Elumatec SA 142

Emmendingen

1,119 km

Light metal / aluminum circular saw
ElumatecSA 142

Call

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control Hsdpeuiy Nyefx Adzjn - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

See details

Listing

Opende

671 km

4-axis CNC machine
ElumatecSBZ 140

€42,500

Fixed price plus VAT

Call

Listing

Balgoij

724 km

Profile machining center
elumatecsbz 140

€39,500

~~€42,500~~

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2009, functionality: fully functional, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. Hjdpfx Aex E Ahzodzon In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

See details

Listing

Wheel set press 250 ton HOESCH HEGENSCHEIDT MFD PR-250

Babberich

740 km

Wheel set press 250 ton
HOESCH HEGENSCHEIDT MFDPR-250

Call

Year of construction: 2010, condition: good (used), Make: Hegenscheidt MFD Type: PR 250 / 1000 Control: Siemens TOUCH Year: 2010 Rebuild in 2010 with SIEMENS TOUCH Rebuild cost EUR 200.000 Distance measuring device with double taster Big package with pressing tools in several diameters Specifications Metric US Standard Centre height 550 mm Max. wheel tread Ø 1100 mm Hsdpskvnggjfx Adzon Max. wheelset length 2500 mm Max. pressing force 250 T Max. cylinder stroke 500 mm Cylinder Ø 300 Working speed 10 - 80 mm/min. Pinole feed 1300 mm/min. Return speed 1300 mm/min. Dimensions (Estimate) Length 6100 mm Width 5730 mm Height 3750 mm Weight 15900 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Germany

1,034 km

Profile Machining Center
ElumatecSBZ 140

Call

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Hjdjy Aafxopfx Adzon

See details

Listing

CNC turning and milling center Elumatec SBZ 140

Lithuania

1,751 km

CNC turning and milling center
ElumatecSBZ 140

€50,000

ONO plus VAT

Call

Listing

Bar machining center Emmegi Phantomatic M4 L

Cochem

920 km

Bar machining center
EmmegiPhantomatic M4 L

Call

Year of construction: 2019, condition: excellent (used), functionality: fully functional, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This enables the machine to reach all 3 profile sides of the workpiece without manual repositioning. The machine is equipped with a water-cooled spindle capable of 20,000 rpm. It is suitable for machining profile bars or parts made of aluminum, PVC, light metal alloys, and steel up to 2 mm. Features a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, it has a second automatic tool magazine with 4 slots on the right side of the enclosure. The profile is positioned by a pneumatically operated stop on the left, and secured by 4 robust clamps that are positioned and monitored automatically. With a second pneumatic stop on the right-hand side, processing of long bars—twice the machining length (overlength machining)—is possible. A movable clamping area also simplifies loading and unloading of workpieces and considerably increases the maximum workable cross-section. The machine comes with the following special equipment: - CamPlus software - Shape software for creating custom machining operations and for importing machining drawings/contours - An additional tool magazine - A second stop Hodpeyzb Ekefx Adzon - A safety enclosure (fully enclosed) Setup, commissioning, and operator training can also be provided by us!

See details

Auction

Päijät-Häme

1,800 km

Rod machining center
ElumatecSBZ 140

Details

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Hjdpfx Aexy Hcisdzen Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

See details

Listing

Dugo Selo

1,740 km

Profile machining centre
ElumatecSBZ 140

€79,000

Fixed price plus VAT

Call

Year of construction: 2016, operating hours: 10,900 h, condition: excellent (used), functionality: fully functional, The machine is in very good condition and fully operational. We don't need it anymore so it is for sale. It is regularly maintained. Dismantling and load on truck are included in price. Some other informations: Hjdpowwtylefx Adzon 4-axis profile machining centre Designed for flexible and efficient machining of aluminium Autonomous clamp positioning Max. working lenght: 7.600 mm 8 pneumatic clamps Tool magazine with 8 tools capacity Spindle working hours 5100h Additional tehnical specifications available on request

See details

Listing

Nattheim

1,192 km

Mini crane
MaedaMC 285-3 CWME

Call

Year of construction: 2022, condition: used, Uplifter mini crane MC 285-3 CWME, lifting capacity 2,820 kg at a radius of 1,400 mm. Maximum lifting height: 8,700 mm. Maximum working radius: 8,200 mm (at a load of approx. 150 kg). Equipped with assembly jib and transport cart UPT 200. Less than 100 operating hours. Storage location: at customer site. Hodpfeytrd Tsx Adzsn

See details

Auction

Rod machining center Elumatec SBZ 140/60

Brandenburg

1,148 km

Rod machining center
ElumatecSBZ 140/60

Details

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, swivel angle A-axis (max.): 180 °, TECHNICAL DETAILS Max. machining length without end face processing: 4,200 mm Max. machining length with end face processing: 4,080 mm Travel distances X-axis travel: 4,200 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Traverse speeds X-axis traverse speed: 65 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 60 m/min Swivel range A-axis: 0° - 180° Positioning accuracy X-axis positioning accuracy: ± 0.1 mm Y-axis positioning accuracy: ± 0.1 mm Z-axis positioning accuracy: ± 0.1 mm A-axis positioning accuracy: ± 0.1° Hodpfx Adjw Svmiszen Max. spindle speed: 24,000 rpm Spindle rated power: 7 kW S1 Tool holder: HSK-F63 Max. cutter diameter: 80 mm Max. saw blade diameter: 200 mm MACHINE DETAILS Air consumption: approx. 180 l/min Machine weight: 4,200 kg Operating hours Spindle hours: 1,280 h Machine hours: 13,066 h

See details

Listing

Gütersloh

869 km

2010 Elumatec SBZ 140
ElumatecSBZ 140

€47,000

Fixed price plus VAT

Call

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Maximum machining length: 3,100 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Hedpfx Aoxvp Nkedzen Loading is included in the price

See details

Listing