Used Smeral Lenp 40 A for sale (78,861)

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less ____ Dcjdpfx Ajz Ap Imopben Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Wendelmixer Diosna W401A - machine for 400 kg of dough - 2 speeds - control panel with program memory - 4 bowls Dsdpeztz E Eefx Apbjcn - machine after refurbishment, in excellent condition - year of manufacture 2012 + Diosna HK1200 dough tipping device with drive and bowl scraper - complete with safety cage - year of manufacture 2020

Year of construction: 2000, condition: used, Spiral mixer Diosna W 240 A Condition: cleaned, serviced, and inspected Capacity for dough: 240 kg Capacity for flour: 150 kg Bowl volume: 370 l Gentle dough kneading at a lower temperature Suitable for all types of dough Dcedpfx Aoz A Sapjpbsn Scraper device with temperature sensor PT100 Digital control Includes 2 dough trough trolleys

Condition: good (used), Year of construction: 1997, Well-maintained, used column drill from Alzmetall. Model: Alzstar 40 Dedpfx Apez H T Euebscn Capacity: 40mm.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 teach pendant Dsdpfjzlry Rjx Apbecn Manufacturer: Stäubli Model: TS2-40 Robot year of manufacture: 02/2024 Controller year of manufacture: 02/2024 Machine type: 4-axis SCARA industrial robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot including CS9-TS2-40 robot controller, SP2 teach pendant and original robot connection cable. The compact robot system was designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for, among other things, electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 02/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Energy consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 02/2024 Controller version: Rack controller Teach pendant: SP2 Power supply: 1 × 230 V AC / 50–60 Hz Connection power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Version: Teach pendant / handheld device Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Date of manufacture: 11/2023 Connections: Controller power supply: 1 × 230 V AC / 50–60 Hz Power consumption: 1,700 VA PROFINET Device Ethernet Digital inputs and outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9-TS2-40 robot controller Stäubli SP2 teach pendant Original robot connection cable Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Tool mounting according to images Accessories according to images Dimensions: Robot dimensions (W × D × H): approx. 400 × 300 × 650 mm Controller CS9 dimensions (W × D × H): approx. 600 × 500 × 270 mm Teach pendant SP2 dimensions (W × D × H): approx. 290 × 180 × 90 mm Maximum reach: 460 mm Z-axis stroke: 200 mm Shipping data: Robot weight: approx. 38 kg Controller weight: approx. 30 kg Total weight without additional accessories: approx. 68 kg Shipping dimensions complete (W × D × H): approx. 1,200 × 800 × 700 mm Shipping on a pallet recommended Condition: Used Year of manufacture 2024 Optical condition according to images. System start and information menus were tested. Robot system including controller and SP2 teach pendant. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9-TS2-40 controller Stäubli SP2 teach pendant Original robot connection cable Tool mounting Accessories according to images Availability: upon agreement. Scope of delivery as shown in the images. The table shown in the photos is not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 3,000 h, SCM Accord 40 fx – CNC Machining Center for Timber Construction (Complete description available in the attachment) Used Machine, Year of Manufacture: 10/2022 Consisting of: - R21431 Accord 40 fx – Working field X-Y = 9000 x 1905 mm, Z = 350 mm, quantity: 1 - OF0158 Usable pass-through height Z = 350 mm (with H50 vacuum cups), quantity: 1 - OF0165 Traversing speed on all axes, Accord 40 fx (PRO-SPEED version), quantity: 1 - OF0168 Pendulum operation, quantity: 1 - OF0169 Automatic axis lubrication, quantity: 1 - OF0299 TELESOLVE remote maintenance via Internet, quantity: 1 - 450328 eye-M PRO operation console with integrated PC, quantity: 1 - 450291 Additional fixed operator panel, quantity: 1 - 870068 TECPAD – remote control for machine functions, quantity: 1 - 560058 No. 10 MATIC support rails, L1825, quantity: 1 - 230237 MAXI working unit – Prisma T, quantity: 1 Djdpfx Apeyzgxcebjcn - 870031 Chip hood on the electric spindle, adjustable, quantity: 1 - 870109 Preparation for angle gear "Prisma T-S", quantity: 1 - 470014 Air nozzle for tools, quantity: 1 - 870119 Tool length measuring device, quantity: 1 - 870016 BRC working unit, quantity: 1 - 510014 Jaw preparation H145 for worktable with 10 support rails, quantity: 1 - 480178 Front stop row H110 for worktable with 10 support rails, quantity: 1 - 480105 Rear stop row H110 for worktable with 10 support rails, quantity: 1 - 480137 First lateral stop row H110 for worktable with 10 support rails, quantity: 1 - 480005 Vacuum cup H110 145x145 mm, quantity: 12 - 480006 Rotatable vacuum cup H110 145x55 mm, quantity: 8 - 480018 Rotatable vacuum cup H110 145x30 mm, quantity: 5 - 480049 Rotatable vacuum cup H110 200x40 mm, quantity: 5 - 480149 First lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480153 Second lateral stop row H145 for worktable with 10 support rails, quantity: 1 - 480107 Round pneumatic clamping cylinders H145, quantity: 8 - 480108 Square pneumatic clamping cylinders H145, quantity: 30 - 480111 No. 6 lifting devices with double stroke H145, quantity: 1 - 450289 Laser and reference stop H145 for arcs (left), quantity: 1 - 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz, quantity: 1 - 190046 PRO-SPEED safety system, quantity: 1 - 210057 TRC 48 – rear-side tool magazine, quantity: 1 - 210190 MACH 5 – quick-change system, quantity: 1 - 870236 RTCP setting – self-calibration system for Prisma working unit, quantity: 1 - Air conditioning for the control cabinet, quantity: 1 - 450288 Safety enclosure with vertical ON-OFF adjustment, quantity: 1 - 210852 SCM angle head HSK 63E – underfloor milling unit, quantity: 1 - OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE, quantity: 1 - OF0543 Operating system Windows 10 embedded 64 bit, quantity: 1 - OF0422 Machine control interface software Maestro cnc, quantity: 1 - OF0435 Hardware dongle for Maestro cnc, quantity: 1 - 524309 Maestro 3D-Advanced module, quantity: 1 - 630359 Additional hardware dongle for Maestro cnc (for USB port), quantity: 1 - 523687 ProView simulation software, quantity: 1 - 109993 MACHINE LANGUAGE: German, quantity: 1 - SPEC01 Special design – Special Accord 9 meter processing in X - SPEC02 Special design – 2 pieces push-in double-stroke aids H145 - SPEC03 Special design – Spare spindle Maxi-Prisma-T

Condition: used, Year of construction: 1980, mit 50 Platten Plates maximum: 60 Dodpfjz Ibbtsx Apbecn Plate formats: 400x400 Platefilter features: Manual spindl dimension ca. 160x60x100 cm Distance between first plate and spindle approx ca. 120cm

Year of construction: 2014, condition: not inspected (used), Ilapak Carrera 1000/40 Flowrapper Model Carrera 1000/40 Year 05- 2014 Serial Number 0640490091 Electric 400 V 50 Hz – 5000 watts Jaw width 250 mm Bar transfer conveyor through the jaws Infeed length 2.2 metres Overall length 3.95 meters Dcjdpfsvkg A Iox Apbsn Overall width 1.4 metres 1 x folding box 120 mm wide product 1 x folding box 140 mm wide product The Machine is in good working condition It is offered at a huge discount to clear it from our stock Price reduced by 50 %

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm z-travel 375 mm control Siemens 840D sl Linear Dcodpfx Apozvhm Iebon

Condition: ready for operation (used), Year of construction: 2021, Edgebander manufactured in 2021. This BIESSE Akron 1440 A features a feed speed of 12–18 m/min and can process panel thicknesses from 10 to 60 mm. It includes automatic edgeband feeding from rolls and strips, along with a pre-milling unit and various trimming units for enhanced finishing. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical specifications: • Feed speed: 12–18 m/min • Feed motor: 1.5 kW • Panel thickness: 10–60 mm • Edge thickness (from rolls): 0.4–3 mm Dcodpoz Dwlmofx Apbon • Edge thickness (from strips): 0.4–12 mm • Glue pot capacity: approx. 2 kg • Glue heating time: approx. 10 min • Power supply: 400 V / 50 Hz / 3 Ph + N • Control voltage: 24 V DC • Processed edgeband: approx. 737,000 mIntegrated configuration/equipment: • Automatic edgeband feeding from rolls and strips • NC-controlled automatic group adjustment • Automatic program selection and diagnostics • Production statistics and maintenance software • Antistatic spraying unit • Pre-milling unit with 2 × 1.8 kW HF motors • Glue application and pressure unit • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Radius scraping unit • Surface scraping unit • Textile polishing brushes • Cleaning liquid spray unit • Hot air blower Technical Specification Feed Speed 18 m/min

Condition: good (used), Year of construction: 1988, Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes Dsdpfezw D Dfsx Apbjcn 630 kN --- ---

Year of construction: 1991, operating hours: 19,888 h, condition: used, - Year: 1991 Dcedpfx Apszldwboben - Documentation available: No - CE certificate present: No - Serial number: 1844 - Operating hours: 19888 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, for sale Machine types + quantity: - 1 unit: Linear transport system for 14 stations, type: LT-14-270 (original from sp280) - 1 unit: Automatic loading station - 1 unit: New infeed station - 1 unit: Double spiral mixer + power box, type: W240A, no.: 7402-978 - 1 unit: Dough return station - 1 unit: Lift-tilt unit, type: HK1200 Dsdpfonnz Hwox Apbocn - 2 units: 2 mixing bowls, type: W240A - The frames and platforms for this line - 1 unit: 1 weighing hopper - 1 unit: 1 screw feeder - Power box - The small parts you need for the line Inspecting the line is possible on-site. If you have any questions or comments, please do not hesitate to contact us. The seller will carefully load all goods into the container/truck. The buyer will be responsible for arranging the transportation. Sincerely, Leo Holland

Condition: used, mileage: 301,587 km, power: 213 kW (289.60 HP), first registration: 12/2012, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Dedpfxszydnij Apbscn MAN Lions LE Ü (A78) intercity bus (41+40+1+1 seats) (Vehicle 455) First registration: December 13, 2012 1,301,587 km Engine replaced at 600,000 km; now approximately 700,000 km with the new engine Engine: 6,871 ccm 213 kW / 290 hp TÜV (technical inspection) valid until 12/2026, emissions test valid until 09/2026 Permissible total weight: 19,000 kg Unladen weight: 11,000 kg Payload: 8,000 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,200 mm Fully automatic transmission 3-stage reinforced engine brake Cruise control Auxiliary heater Retarder Electric + heated mirrors Additional heater + auxiliary heater Isri comfort driver's seat, air-suspended Seats: 41+1 x wheelchair/stroller space + 1 driver Lawo Sigma-Control Single door at the front Double door at the rear Tires: 295/80R22.5, front approximately 40/80%, rear approximately 80/80% Auxiliary headlights + daytime running lights Last major inspection and repair in 07/2026 Price: €11,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: new, Year of construction: 2025, Machine to close cans by seaming the lid onto the can - Specifications: max. speed of the machine in neutral: of the machine in neutral: 40 cycles/min; spin speed for sealing: 340 spins/minute; range for can: diameter: 50-160mm, height: 50-200mm; power: 1.1kW; machine dimensions: L2050×W1000×H1800mm; weight: 1100kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Dodpsv Nk Tujfx Apbocn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), Year of construction: 1985, Mazak Slant Turn 40 MC CNC lathe with chip conveyor. Year of manufacture 1985, weight 8 tons. Control system Mazatrol T3, with three-jaw chuck, tool turret, tailstock. Ready for use, can be viewed while still powered. Dedpfjvzgyhox Apbecn

Condition: used, Year of construction: 2008, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Rover ROVER A 3.40 FT K2 CNC machining centre Description Working fields: X = 3685 mm; Y = 1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum tank Vacuum system for 2 300 m3/h pumps 300 m3/h rotary claw vacuum pump 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Dcedpjzqdqljfx Apbon Controls on remote keyboard Numerical Control XP600 User-friendly interface BIESSEWORKS - Advanced programming system BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with 2 mats and low fencing CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. It comes with the complete panel return system. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Dcedpfx Apjzug Smobsn Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is included with the machine.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Dsdpfxoy S Edxs Apbscn Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request Dcodpfx Apoxl Hi Tobon terms of payment: 100% prior to delivery

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 16960 € 325.63 € 40 mm MK 4 360 mm 61 - 1.169 (9) U/min 2.2 kW M33 550 mm 950 mm 2363 mm 610 kg 0,1 / 0,2 / 0,3 / 0,4 mm/U 200 mm 175 mm Dsdpowiq Htefx Apbjcn 35 - 835 mm 1240 mm 550 x 550 mm 950 x 550 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE automatic feed gear drive fixed machine table tiltable turntable front wheel for sensitive fine feed coolant equipment lighting OPTION (PRICE ON REQUEST): Manual tapping system ALTERNATIVE: ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST

Condition: as good as new (ex-display), Year of construction: 2023, pressure 40.0 t Dcodpfx Apoxabumjben chamfer lenght 1600 mm distance between columns 1200 mm column arm 200 mm ram stroke speed 60.0 mm/sec return speed 80. mm/sec work speed 60.0 mm/sec work stroke 100 mm table height 760 mm table width 150 mm oil volume 130 ltr. voltage 400 Volt Control ESA E21 total power requirement 4.0 kW weight 3030 kg range L-W-H 2050 x 1800 x 2030 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours Furnishing: - compact hydraulic press brake - BERNARDO NC control model E21 - swiveling control panel - electrical adjustment of the backgauge - Back stop on recirculating ball spindles - electrical adjustment of the immersion depth - Laser protection device in front - Upper deer foot tool - divided - Tool holder with quick change system - Universal die block - side + rear protective device - 2x front support arms - movable double foot switch (operation)

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 734, Drill diameter: 35/40 mm Spindle mounting: MK 3 Spindle speeds in 2 ranges and continuously adjustable: 160 - 2250 rpm Drilling stroke: 140 mm Overhang: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 250 kg Space requirement: 900 x 550 x 1830 mm Dedez Divqopfx Apbscn

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Professional sliding table saw in heavy-duty design - with scoring unit; externally adjustable with separate drive motor - format sliding carriage made of anodised aluminium with a proven and permanently smooth-running ball contact system on hardened guideways (10-year manufacturer's warranty from date of first commissioning) Dcodpfxjzlbq So Apbsn - saw rip fence with round-bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - table extension - table widening - with integrated on/off switch on the sliding carriage - with motorised height and tilt adjustment of the saw unit, digital display for tilt - programmed control of the saw blade height and tilt and the position of the rip fence - swivelling control panel at eye level - Made in Italy quality - Trimming length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Cutting-to-length width to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Tilt of the saw blade: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring saw blade: 120 mm - Speed main saw blade: 3500/5000 rpm - Speed scoring saw blade: 9200 rpm - Dimensions format sliding carriage: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Motor power scorer: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Dcedpoy Hl Iyofx Apbjn Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)