Used Toskar Ta 2100-40 for sale (31,965)

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000, Empty weight: 4.760 kg Cedpszkk H Tsfx Al Aehc Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Chodpozd Rmgjfx Al Aec Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1993, operating hours: 6,740 h, load capacity: 4,000 kg, lifting height: 4,400 mm, fuel type: diesel, construction height: 2,970 mm, gearing type: automatic, Equipment: cabin, H 40 D front loader with full cab own forklift truck from GLW various repairs, always serviced Total operating hours 6,740 h Lifting height 4.4m Total height 2.97 m Subject to errors and prior sale. Price ex warehouse Riederich. Chodpfxeurpwte Al Aec

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000, Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm Chodpfx Alezi Dnho Asc We have the possibility to stack trailers!

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW Chsdpfx Aljgp Dyxo Aec height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: used, axle configuration: 3 axles, first registration: 08/1995, color: other, Year of construction: 1995, Empty weight: 5.600 kg Axle 1: left 3 mm right 5 mm Axle 2: left 4 mm right 4 mm Chsdpfx Aezw Evpol Asc Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: good (used), mileage: 652,170 km, power: 252 kW (342.62 HP), first registration: 09/2020, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,920 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, spoiler, General information Number of doors: 2 Cab: Comfort Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 8000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.032 kg Carrying capacity: 12.468 kg GVW: 19.500 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6d History Number of owners: 2 Condition Technical condition: average Visual appearance: good Number of keys: 2 (2 hand transmitters) Chsdpfx Aoz Iwwkjl Aec Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Stability control - Toolbox - Visor

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Chodpfx Aozdrzxel Asc Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: used, mileage: 496,296 km, first registration: 12/2013, fuel type: diesel, number of seats: 38, next inspection (TÜV): 09/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 118) First registration: 16.12.2013 496,296 km Engine: 6,871 ccm 213 kW / 289 hp Euro 5 EEV MOT valid until 12/2026 / Technical Inspection valid until 09/2027 Permissible total weight: 19,500 kg, unladen weight: 11,255 kg, payload: 7,245 kg Overall length: 11,895 mm x Overall width: 2,550 mm x Overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38 + 2 emergency seats + 40 + 1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system via IBIS cash register Tires 275/70R22.5, approximately 50% tread all around 06/26/2025: Upper rear right wishbone replaced; 12/10/2025: Front left brake hose replaced Various signs of wear and tear, consistent with the vehicle's age Good overall condition Last inspection on 12/09/2024 at 448,298 km, next inspection due at 508,828 km Chedpfxoz Id S Io Al Aec Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Errors, typos, and prior sale are subject to change.

Condition: new, Year of construction: 2024, == Exhibition Machine == ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of a separate container (33 l), pump with motor protection switch, complete valve assembly) and LED machine light Chjdpfx Aed Hy Elsl Aoc standard equipment: mushroom push button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch speed adjustment stepless, digital speed display, feed overload protection, protection class IP54, connecting plug spindle protection with electrical protection technical data: drilling capacity steel E335 (St 60) 40 mm thread cutting: steel E335 (St 60) M 24 cast iron EN-GJL-200 (GG20) M 30 short spindle MK 3 spindle stroke 120 mm overhang 293 mm column diameter 115 mm machine table, usable support area 514 x 360 mm T-slots, number x width x spacing 2 x 14 x 224 mm distance spindle-table min./max. 117/701 mm feed 0.10 + 0.20 mm/rev machine height without options approx. 1840 mm net weight approx. 285 kg drive stepless motor 1500 / 3000 rpm power 1.45 / 1.9 kW spindle speed 160-2250 rpm

Condition: used, axle configuration: 3 axles, first registration: 08/2007, color: other, Year of construction: 2007, Empty weight: 5.500 kg Axle 1: left 4 mm right 4 mm Axle 2: left 6 mm right 6 mm Axle 3: left 4 mm right 4 mm Chjdpfxoza T Uyo Al Ajc We have the possibility to stack trailers!

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame Csdpfx Ajxpfl Ijl Aohc -Clamping surface: 2400 x 2100 mm -Table height: 750 mm -Plate thickness: 130 mm -Transport dimensions: 2400/2100/H750 mm -Weight: 4900 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Distance between chucks: 625 mm Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Cedpfx Aey Hk Niel Aehc Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: used, mileage: 1,000,820 km, power: 220 kW (299.12 HP), first registration: 01/2011, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: beige, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü 100 Km/h (40+1+3 emergency seats) with seatbelts, full air conditioning (Vehicle 729) First registration: 18.01.2011 1,000,820 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 04/2027 Permissible gross vehicle weight (GVW) 18,600 kg, unladen weight 11,760 kg, payload 6,840 kg Overall length 11,950 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5, front approximately 90%, rear approximately 40/40% Double doors front and rear Driver's cab with door Ramp Fully automatic transmission Chsdpfoz H Ecfsx Al Aoc Microphone Electric windows 2 x electric + heated mirrors Full air conditioning Auxiliary heating + 2nd heater Stop brake 40+1+3 emergency seats Emergency exit 12-volt socket Chassis with slight surface rust 01.12.2024: Air suspension on the rear axle, left side, replaced 20.02.2024: Air conditioning compressor replaced 20.03.2024: Axle ventilation replaced ABS sensor on the rear axle, right side, replaced with sealant Rear axle hub replaced Front axle triangular wishbone replaced 06.05.2024: Rear axle, right side, sensor replaced 10.07.2024: Triangular wishbone, right side, lower arm replaced Air suspension on the rear axle, left side, rear, replaced Multi-circuit safety valve replaced 24.09.2024: Water hose for transmission cooler, thermostat, and water filter replaced 08.08.2025: Front axle brake pads replaced 08.08.2025: Rear axle brake pads replaced 06.01.2026: 6 x valve covers replaced 20.02.2026: Seal between crankshaft and flywheel replaced Stabilizer bar on rear axle replaced Various signs of wear and tear, consistent with age Last inspection on 02.10.2025 at 974,472 km, next inspection due at 1,034,472 km Price: 8,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Chodpfouiafuex Al Aoc

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 10/1992, total width: 2,440 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,810 mm, Year of construction: 1992, = Additional Options and Accessories = - Lift axle - Air suspension - Drum brakes = Remarks = Groenewegen 1992, flat 40-foot swap chassis with ROR axles and drum brakes, non-extendable, suitable for 1 x 40ft / 2 x 20ft / 1 x 20ft central / 1 x 30ft containers; first axle is a lift axle, unladen weight: 5,660 kg, gross vehicle weight: 36,000 kg, tires: 385/65-R22.5 (Tread depth: L: 7/9/9 mm; R: 10/12/12 mm), Dutch registration = Further Information = Chodexui Ahspfx Al Aoc Axle configuration Tire size: 385/65-R22.5 Axle manufacturer: ROR DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 8,000 kg; Left tire tread: 45%; Right tire tread: 60% Rear axle 2: Max. axle load: 8,000 kg; Left tire tread: 55%; Right tire tread: 75% Rear axle 3: Max. axle load: 8,000 kg; Left tire tread: 55%; Right tire tread: 75% Weights Unladen weight: 5,660 kg Payload: 30,340 kg Gross vehicle weight (GVW): 36,000 kg Functional Body make: Groenewegen 40.05CC-12-24 Condition Technical condition: good Visual condition: good Identification Registration number: OB-28-ZK Additional Information Please contact Arne Honingh for further details.

Condition: used, mileage: 554,000 km, power: 324 kW (440.52 HP), first registration: 01/2011, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGS 26.440 6x2-2 LL tank truck * EEV * Willig superstructure from year 2011 * Top/bottom filling * 3 compartments: 8000L/5000L/8000L, 2x hose reels * Additive system * F.A Sening pump/Multiflow * Printer * Air suspension * Lift/steer axle * Long-distance cab with 1 sleeper bunk * PTO (power take-off) * Differential lock * Parking heater * Heated seats Cedpfx Aleygp Rwj Aehc * Cooling box * Trailer coupling * Radio/CD * 1st owner * Exchange engine Tank documentation available Tank inspection 01/29

Condition: used, functionality: fully functional, Year of construction: 1990, color: beige, loading space length: 5,500 mm, Roll-off container, 17 m³, 5.5 m, €1,500.00 net Roll-off container, 20 m³, 6 m, €1,700.00 net Roll-off container, 36 m³, 6.5 m, €1,800.00 net Chjdpfx Aloz E R Tts Asc Roll-off container, 40 m³, 7 m, €2,200.00 net Additional containers available. Loading possible.

Condition: ready for operation (used), functionality: fully functional, This used Jungheinrich Esmena pallet racking is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay shelving is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load capacity of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 10,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow lacquered - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue lacquered - Levels: floor + 2 - Pallet positions: 324 incl. floor locations - Condition: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 037 x uprights (approx. 400 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 288 x safety pins Price: €6,580.00 net €7,830.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or extension – we offer professional advice on your racking configuration. Chjdpoz Iw Enjfx Al Asc SHOWROOM: Visit us in our showroom! See a wide range of our pallet racking, warehouse shelving, and other solutions on display. Many systems are assembled and can be experienced firsthand. Our specialists are available for questions and personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2004, total length: 11,310 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,990 mm, Year of construction: 2004, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension - Disc brakes = Notes = 2004 SCHMITZ CARGOBULL SCF24G 40FT High Cube chassis with ABS/EBS, SAF axles with disc brakes, lift axle on the third axle, unladen weight: 5,570 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 8/7/3 mm; tread depth right: 0/7/0 mm), Dutch registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF DISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; tire tread depth left: 50%; tire tread depth right: 5% Rear axle 2: Max. axle load: 9000 kg; tire tread depth left: 45%; tire tread depth right: 45% Rear axle 3: Lift axle; Max. axle load: 9000 kg; tire tread depth left: 20%; tire tread depth right: 5% Cjdpfxjz Ia Ryo Al Ashc Weights Unladen weight: 5,570 kg Payload: 33,430 kg GVW: 39,000 kg Functional Body brand: Schmitz Cargobull SCF24G Condition Overall condition: average Technical condition: average Optical condition: average Identification License plate: OH-74-VD Further Information Please contact Arne Honingh for further information.

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE Chsdpfjxab Rhsx Al Asc 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2004, suspension: air, color: black, Year of construction: 2004, Equipment: ABS, Make axles: Mercedez-Benz Empty weight: 5.360 kg Carrying capacity: 33.640 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - Lift axle - MB axles - Twist-locks = Remarks = Chjdpfxozzq T Io Al Ajc Renders ROC 12.27CC / Container Chassis 20FT-40FT / Mercedes + Disc / 1x Lift Axle

Condition: used, axle configuration: > 3 axles, first registration: 01/2004, color: other, Year of construction: 2004, Empty weight: 8.950 kg Axle 1: left 6 mm right 6 mm Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm Axle 4 left 6 mm right 6 mm We have the possibility to stack trailers!  Csdpszh Iv Hsfx Al Aohc

Condition: used, Year of construction: 2025, 40-foot High Cube container with side door and 2 window openings! ----* Year of manufacture: 2025 * With side door and 2 window openings * Like new, used only once * Tare weight: approx. 4,080 KG * Gross weight: 30,480 KG * Payload: 26,400 KG * Small crack due to loading. See photos. * Price: 4,900 Euro, net + 19% VAT. Codpoz E Uaksfx Al Ashc ----For further questions, please call: Erik Kortum: WhatsApp ?All information is subject to change without notice and without guarantee. Errors and prior sale are reserved.?

Condition: used, mileage: 558,740 km, power: 132 kW (179.47 HP), first registration: 11/1992, fuel type: diesel, empty load weight: 6,200 kg, maximum load weight: 4,400 kg, overall weight: 10,600 kg, tire size: 445/70 24, axle configuration: 4x4, wheelbase: 3,200 mm, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, Year of construction: 1992, operating hours: 558,740 h, front tire size: 445/70 24, rear tire size: 445/70 24, Equipment: all wheel drive, trailer coupling, truck registration, Vehicle number for inquiries: 41571 Unimog, 437/40 * Year of manufacture: 1992 * Trailer hitch * Analog tachograph * Transmission type: Manual * Suspension: Leaf spring * Gross vehicle weight: 10,600 kg * Unladen weight: 6,200 kg * Payload: 4,400 kg * Permissible gross vehicle weight: 10,600 kg * Tire condition 1st axle: -- - Tire size: 445/70 R24 * Tire condition 2nd axle: -- - Tire size: 445/70 R24 * Wheelbase: 3200 mm * Tire sizes: 445/70 R24 * Tank inspection valid until 05-2028 Cedpfx Aozxa Hljl Aehc * ADR certificate available * Tank: 5200 liters * Pump and meter * 3 seats * On request, we will send you a video and more pictures. Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you.