Pillar Drilling Machine

ALZMETALL Alzstar 40/SV

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U distance spindle /table 117 / 701 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1840 mm Furnishing: - autom. Feed 0.10 + 0.20 mm / rev - stepless speed adjustment - Short spindle MK 3 - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Digital speed display - Feed overload protection - Spindle protection with electrical fuse - 2 m cable with plug 16A - Operating instructions in German including special equipment: Bodpjxaakajfx Al Aeln - Coolant device "B" pos. 25.

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Bsdpfx Aozkvkqel Ajln

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Center of spindle to wall or column 293 mm Bsdpfxsyvvmrs Al Aeln Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Bledpfx Asy S Artjl Ajn Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm Bjdsvxpp Hopfx Al Ajln spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: new, Year of construction: 2024, == Exhibition Machine == ALZMETALL Pillar Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of a separate container (33 l), pump with motor protection switch, complete valve assembly) and LED machine light standard equipment: mushroom push button, reversing switch (for clockwise and counterclockwise rotation), motor protection switch Bledpfx Asd Hy Elsl Aon speed adjustment stepless, digital speed display, feed overload protection, protection class IP54, connecting plug spindle protection with electrical protection technical data: drilling capacity steel E335 (St 60) 40 mm thread cutting: steel E335 (St 60) M 24 cast iron EN-GJL-200 (GG20) M 30 short spindle MK 3 spindle stroke 120 mm overhang 293 mm column diameter 115 mm machine table, usable support area 514 x 360 mm T-slots, number x width x spacing 2 x 14 x 224 mm distance spindle-table min./max. 117/701 mm feed 0.10 + 0.20 mm/rev machine height without options approx. 1840 mm net weight approx. 285 kg drive stepless motor 1500 / 3000 rpm power 1.45 / 1.9 kW spindle speed 160-2250 rpm

Condition: new, range L-W-H 675 x 510 x 880 mm weight 56 kg 5 St. Bodpfju Iml Ijx Al Ajln Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm.

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox Bjdjharwvepfx Al Aoln - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition

Condition: ready for operation (used), Deckel FP 2 NC Universal Milling Machine Universal Milling Machine TNC 320 / 321 Travel distances: x- 300mm | y- 300mm | z- 400mm Stepless spindle speed 31.5 - 5000 rpm Feed rates 2-4000 mm/min Rapid traverse 4000 mm/min Tool holder SK 40 Quill stroke 80 mm Machine weight 1350 kg You are welcome to arrange an inspection appointment. We can also organise affordable shipping for you! You will receive a proper invoice. For international customers, we can also provide a net invoice. The requirement is a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Bodpfexfkm Aox Al Asln Variations in technical data or errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm Bledpew E Nnbsfx Al Aon z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.