Used Weiler Commodor B - Teilüberholt for sale (39,078)

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! Hfodpfext Ngqex Afreh All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: as good as new (ex-display), WEILER COMMODOR 180 GSD / New Machine – Exhibition Model - Available from stock - Exhibition machine / NEW – UNUSED - 3-axis digital readout - CE marking - Center height 180 mm - Swing over bed 380 mm - Swing over cross slide 215 mm - Distance between centers 1000 mm - Bar capacity 56 mm - Speeds / gearbox: 25 – 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting inch / metric etc. - Chuck guard - Tailstock / quill taper MK 4 - Quill stroke 150 mm - Coolant system - Multifix quick-change toolpost with insert - 3-jaw chuck 200 mm - Work lamp - Chip guard (rear) - Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000 kg Errors and omissions excepted Hfjdpfoy Dc Tzjx Afrsh

Condition: ready for operation (used), functionality: fully functional, Weiler Commodor in good working condition. Specifications: Swing diameter over bed: 380 mm Swing diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Speed: 25–2000 rpm Motor power: 4 kW Machine equipped with: Hedpfxox Ngpdj Afrefh 3-axis digital readout 3-jaw chuck with multiple jaws Coolant system Multifix quick-change tool post with 4 holders Collet system with collets Bed stop

Condition: ready for operation (used), Year of construction: 1997, Lead and feed screw lathe / WEILER CONDOR B incl. 3-axis digital readout / Heidenhain - Machine from educational facility - Center height: 165 mm - Swing over bed: 330 mm - Swing over cross slide: 185 mm - Turning length: approx. 800 mm - Spindle speeds: 22 - 2800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric, etc. Hsdpjy A Ey Ujfx Afrofh - Bar capacity: 40 mm - Tailstock / quill taper: MT 3 - Electrical chuck guard - Multifix tool post with holders - 3-jaw chuck - Forkardt - Machine lamp - Chip guard at rear - Bed stop - Machine feet - Documentation Dimensions (LxWxH): 1.8 x 0.8 x 1.6 meters / Weight: 1100 kg Subject to errors and input mistakes.

Condition: repair required (used), turning length 1000 mm turning diameter over bed 380 mm turning diameter over slide rest 190 mm number of spindle speeds 25 - 2000 U/min. turning speeds 18 Stk. spindle bore Ø 56,0 mm tailstock quill taper MT DIN 228 / MK 4 quill stroke 150 mm Hedpfxsw U U Uqe Afrefh bed width 310 mm spindle taper DIN 55027 / 6 feeds - longitudinal 0,022 - 0,8 mm/U feeds - cross 0,011 - 0,4 mm/U thread M 0,3 - 10,0 mm voltage 380 V total power requirement 7,5 kW weight of the machine ca. 1600 kg Basic functions are available Machine with various leaks Sold in current condition at a special price ! Lathe with precision ground and induction hardened bed. Very suitable, for example, for use in workshops and teaching facilities. - machine video - ?v=zCGu4i6V5dM Furnishing: - robust lead and pull spindle lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX steel holder - size B - with 3x inserts - movable tailstock, including keyless chuck - Chip protection back wall - EMERGENCY stop button at the front - adjustable bed stop - Coolant system including coolant pan - User manual (PDF)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by Heidenhain – Very Good Condition! Technical Data: >> Year of manufacture: 1991 | Machine No.: 3140 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short-taper spindle nose DIN 55027 size 6 with bayonet lock >> Tailstock taper: MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake selectable >> Motor power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Includes and features: >> Heidenhain 3-axis digital readout >> 200 mm three-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders Hfjdsylh Ncopfx Afrjh >> Drill chuck, live centre >> Bed stop >> Machine feet About the machine: For sale is a Weiler Commodor lathe in very good, fully operational condition. The machine comes from a state-operated workshop and has seen little use. The Commodor is one of the largest manual lathes manufactured by Weiler – a very robust and powerful machine. The 3-axis digital readout by Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Condition: ready for operation (used), Year of construction: 2002, Lead and feed screw lathe / WEILER COMMODOR 230 AC - CE marking - Year of manufacture: 2002 - Center height: 230 mm - Swing over bed: 475 mm - Swing over cross slide: 270 mm - Distance between centers: 1000 mm - Spindle speeds: 25 – 2000 rpm - Automatic longitudinal / cross feeds - Thread cutting: metric / imperial / module etc. - Spindle nose DIN 55027 / size 6 - Tailstock taper: MT 4 - Drive power: 11 kW - Electric chuck guard - Multifix toolpost with inserts - Three-jaw chuck - Chip guard with work light - 2x Emergency stop - Coolant system - Machine feet - Documentation Hfodpfx Asywtiyjfreh Dimensions (LxWxH): 2.6 x 1.1 x 1.6 meters / Weight: 1900 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Weiler precision lathe model Condor B, lead and feed screw lathe with brand new K&C 3-axis digital readout, CE compliant! Technical data: Hsdjxcuazopfx Afrofh >> Machine No. 2442, year of manufacture 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake, selectable >> Length: 1.83 m, height: 1.29 m, depth: 0.88 m Equipment and features: >> New K&C 3-axis digital readout, 12-month manufacturer's warranty, supplied with operating manual Features: mm/inch switching, selectable ABS/INC coordinates, value halving function, reference mark, tool memory for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 x brand new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 x 200 mm 4-jaw chuck with 1 set of jaws >> New collet chuck system and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, changewheel box with safety interlock, spindle brake About the machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes work easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Center Lathe Model Condor B Guide & Feed Shaft Lathe with 3-Axis Digital Readout by K&C NEW from Training Workshop!! Technical Data: >> Machine No. 91-1814, Year of manufacture: 1991 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread leads: from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Scope of Delivery and Features: >> NEW 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating manual Hedjw Nw Dqopfx Afrefh Functions: mm/inch switch, ABS/INC coordinate selection, display value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> 1 pc. NEW 160 mm 3-jaw chuck, 2 sets of jaws >> 1 pc. 160 mm 4-jaw chuck, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle safety guard >> Rear splash guard >> Fixed steady rest >> Machine feet Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: We are offering a Weiler Condor in very good condition. The machine is, of course, fully operational. It is a very robust and powerful lathe. The brand new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Condition: good (used), WEILER COMMODOR L&Z Lathe from German Army (Bundeswehr) stock - Good, fully operational condition - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25 - 2000 rpm - Threads: Metric / Inch etc. - Automatic longitudinal & cross feeds - Tailstock MT 4 - 3-jaw chuck 250 mm - Electric chuck guard - Multifix base holder & inserts Hsdoykknfspfx Afrofh - Coolant system - Chip guard rear wall - Machine documentation Dimensions (LxWxH): 2.5 x 1.3 x 1.7 meters / Weight: 1500 kg Subject to errors and omissions

Condition: used, Year of construction: 2001, gebraucht 2001 010191 prompt, Zwischenverkauf v Deutschland 24500 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 80 - 2 Gänge/" 0.2 - 4 200 - 5 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm Hsdpjyxxygefx Afrofh 715 mm 1245 mm 720 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with collets from 3 to 30,5 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest Hfsdey D N Dajpfx Afroh - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears Hfsdpsy Tmkvsfx Afroh >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. Hjdofhnr Iopfx Afrofh We can overhaul a machine from you or deliver a machine from us.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: Hodpfxoymdyms Afrofh For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard Hjdpfx Afevrdlcorofh >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: Hjdpjwrm Dtsfx Afrefh >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Dear Sir or Madam, For sale is a CNC milling machine of the type Kunzmann WF4/3 from year of manufacture 2004. The machine can be operated manually and under control. The Heidenhain TNC124 control is excellent for learning the basics of CNC programming and is still very popular in production as well as for machining special parts. The very quickly folding vertical milling head makes the Kunzmann a real all-rounder with nevertheless low space requirements. Hfjdpfsu H U Hkex Afroh You will receive this machine from us workshop tested, partially overhauled or completely overhauled, available with or without cabin. Availability: on request Year: 2004 Control: Heidenhain TNC124 Table: fixed angle table 650x350mm Travel: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request we can completely or partially overhaul the selected machine for you - On request you can order additional accessories such as tools, etc., directly - On request we can also install other accessories such as safety devices - We are also happy to take care of shipping and/or installation

Condition: reconditioned (used), Product Information "Voest Alpine DA 160" Lead and feed screw lathe Voest Hfodpjy Ndqrefx Afreh Model DA 160 Condition: Refurbished Technical Specifications Centre height: 165 mm Distance between centres: 650 mm Swing over bed: 330 mm Swing over cross slide: 190 mm Bed width: 210 mm Lead screw diameter: 25 mm Chuck diameter: 160 mm Tailstock taper: MT 3 Spindle speeds (16): 30 - 2,500 rpm Motor power: 2 / 2.4 kW Quill travel: 100 mm Dimensions (LxWxH): 1,500 mm x 900 mm x 1,650 mm Equipment: - 3-axis digital readout, brand Sino – NEW - 3-jaw lathe chuck - Emergency-stop push button - Multifix quick-change toolholder system, 6 holders - Machine light NEW - Bed stop - Coolant system NEW - Drill chuck with Morse taper arbor - Live centre - Lead and feedscrew cover NEW - Chuck guard, secured with limit switch - Operating tools - Operating manual - Machine feet

Condition: reconditioned (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, quill stroke: 50 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table length: 360 mm, table width: 800 mm, overall weight: 1,600 kg, table load: 200 kg, year of last overhaul: 2026, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), Dear Sir or Madam, For sale is a universal milling machine of the type Maho MH500M, which particularly stands out due to its extremely simple and comfortable operation. For example, all feed rates can be continuously adjusted via potentiometer. The machine has undergone extensive partial overhaul in our workshop, so it is in excellent technical and optical condition. All guideways are in order, the gearboxes run quietly, and the levers shift smoothly. Availability: on request X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 350 mm Main spindle speed range: 63 - 4,000 rpm Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table type: Fixed Clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse (X/Y/Z): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work light, electrical documentation, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can fully or partially overhaul the selected machine - Upon request, we can repaint the machine in your preferred color - Upon request, you can order further accessories such as tools, etc., directly Hfsdpornnf Nefx Afreh - Upon request, we can install further accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation on site

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv. This newer model is particularly notable for its infinitely variable spindle speed control with Heidenhain Aktiv control, making operation both very simple and extremely comfortable. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. Delivery time: on request Machine number: 2202-xxxx Table: Rigid angle table or rotary-tilting-swiveling table Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Infinitely variable Hfodpfx Asx Hr Dzefrsh Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital readout with Aktiv control, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can fully or partially overhaul the selected machine for you - If desired, you can order further accessories such as tools, etc. directly - If desired, we can install additional equipment such as safety devices, etc. directly - We are also happy to handle shipping and/or installation for you

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 25 rpm, year of last overhaul: 2026, Equipment: documentation/manual, Dear Sir or Madam, We are offering a partially overhauled Deckel FP2 for sale. This newer model stands out particularly due to its stepless speed control, which makes operation very easy and extremely comfortable. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. --- Currently 3 units available for immediate delivery! --- Availability: 3x immediately Machine no.: 2202-xxxx Table: fixed angular table or rotary-tilt-swivel table Travel distances: X 400mm / Y 220mm / Z 400mm Drive power: 3kW Number of spindle speeds: 16 Speed range: 25-2500 rpm Tool holder: SK40 Drawbar thread: S20x2 Feed: stepless Equipment and accessories: Heidenhain 3-axis digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected Hfedpfxey Exayj Afrsh - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can fully or partially overhaul your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If required, we can directly install further equipment such as safety devices - We are happy to arrange shipping and/or installation for you

Condition: reconditioned (used), functionality: fully functional, Equipment: documentation/manual, Dear Sir or Madam, We hereby offer a Deckel FP3 milling machine. The machine is undergoing comprehensive partial refurbishment in our workshop and is therefore in excellent condition. We are happy to retrofit safety devices or additional equipment according to your requirements. We look forward to your inquiry! Delivery time: on request Dimensions: 2.00x1.60x1.90 m (LxWxH) Weight: approx. 1,500 kg Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 380 mm Table clamping surface: 800x420 mm Speed range: 40-2,000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Axes with feed: X, Y, Z Feed rate: 10-500 mm/min Rapid traverse: approx. 1,500 mm/min Further equipment and accessories: on request Our service promise to you: - We are a certified master craft business specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - We can perform a complete or partial overhaul of your selected machine upon request Hodpeq H Eabjfx Afrjfh - You are free to choose the paint color for your selected machine - On request, you can order additional accessories such as tools, etc., directly - On request, we can also install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation at your location

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, Equipment: documentation/manual, Dear Sir or Madam, We are pleased to offer you a partially refurbished milling machine, type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly partially overhauled in our workshop, so it is in absolute top condition, both technically and visually, and is almost indistinguishable from a new machine in terms of geometry. We look forward to your inquiry! Hjdpfx Aox Irwdsfrsfh Delivery time: on request Spindle speed: 50 - 2,500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1,300 mm/min Drive power: 3.7 kW / 4.4 kW Travel paths X/Y/Z: 500/400/400 mm Tool holder: SK40 Clamping system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1,600 kg Table version: Fixed angle table or rotary-swivel-tilt table Additional features and accessories include: 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, machine levelling feet, technical documentation, and much more on request. Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can carry out a partial or complete overhaul of the selected machine - You are free to choose the paint colour of your machine - You can optionally order additional accessories such as tooling, etc. directly - On request, we can install further accessories such as safety equipment, etc. - We are happy to take care of shipping and/or machine installation

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Hodpspy Eldjfx Afrofh Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation