Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any ...
bar length 3.000 mm - - - - - - - - - Fe9pkcz - - - - - - - - - Round bar loader | FMB - TURBO 3000-1700 LMS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3000/1700 | 3000 1700
Heat output capacity: KW air volumen: m³/h weight of the machine ca.: t control: Siemens D3xb08ijy bar material dia.: min: 6 / max: 80 mm Bar length: 1200 mm voltage: 400 V / Hz Dimensions (LxWxH): 2,0 x 1,4 x 1,5 m weight: ca. 520 kg The bar feeder is currently in the technical department.
Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: DBM/DBMF Design: Surface loading magazine or bundle loading magazine diameter range: 6-67mm DB-EVO at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unlocking t...
Automatic bar loading magazine for single spindle automatic lathe / short lathe, new TEST the new DB-EVO bar loader 4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request) very high speeds even with profile material Manufacturer: Giovanni Cucchi Machine type: Automatic bar loading magazine for single-spindle / short turning Type: DB-EVO Design: Surface loading magazine or bundle loading magazine diameter range: 20-110mm DB-EVO at a glance: Scope of delivery and optionally orderable funct...
We sell here our bar feeder KUPA LM 92 pro. Operating instructions unfortunately not available. Was attached to a Gildemeister CTX 400 E. Circuit diagram available. Space requirement B2,2m x D 1,1m x H 1,4m F0esl2q Inspection in 49733 Haren possible.
Bar loading magazine for multi spindle automatic lathe Schütte SG18, new Special offer! Save space and loading time! Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Schütte SG18 Type: DBM Design: lateral loading magazine / integral loading magazine Yob: 2021 length of bars: 3000mm There are 5 pieces available brand new! Please, contact us for getting more information and pictures on mail(at) or Bvtabkq0o2
diameter 35 - max. 65 mm Guide channels 6 control SPS max. bar length 3.200 mm bar material dia. min. 35 mm bar material dia. max. 65 mm total power requirement 2 kW weight of the machine ca. 2,0 t dimensions of the machine ca. 4,0 x 1,1 x 1,6 m Multi-Channel-Bar-Feeding-System BREUNING IRCO - 65.6 196.6 Vz9yuowc - has been installed at a Mori Seiki ZL 200 SMC
Barfeeder Capacity and type of bars Xnm7tjs Round bars 8 - 65 mm Hexagonal bars 7 - 55 mm Length of bars max. 2100 mm Machine has been used behind Dosan TT 1800 SY with Fanuc 31i- Model A If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.
ILS IRCO Breuning barfeeder offered. Type: RBK 10012 Power: 400 V Remote control: Esitron HBG 10 Year of built: 2007 Included documentation and software Dimensions: 200x100x140 cm LxWxH For more information call us or send an e-mail. Fb90m2p
max. bar length max. 3.200 mm bar material dia. 5 - 70 mm Yr0xjo change time ca. 30 sec Loading Length 3.250 mm rapid traverse 30 (70) m/min dimensions of the machine ca. 5,0 x 1,5 x 2,0 m weight ca. 1,5 t total power requirement 2 kW Single-Channel bar loading magazine BREUNING IRCO - SiMag 70.1 R - incl. misc. feed-channels 13, (23), 33mm
Short bar loader LNS Quickload Warehouse number: 007 Delivery time: immediately Zsea0f9f LxWxH: about 2700x1800x1700 Weight: about 500kg Control: via CNC machine Rod diameter: about 8-80mm Rod length: approx. 150-1525mm Max. Bar weight: about 100kg Max. Feed path: about 1400mm Equipment: - Support bracket - Operating manual Price and further technical data on request
bar Ø: 5 - 100 mm bar length: 150 - 1600 mm (depends on spindle length) servo drive double feed system autom. adjustment of guid channel autom. adjustment of bar separation mobile control panel Bn3maeayjs loading area: 650 mm x 1650 mm Only use for one short job!
-Machined bar diameter Min. Ø 3 mm - Max. Ø 22 mm Ihzaku3fk - Supply voltage 230 V 50 Hz Three-phase - Feeding speed 0-2000 mm / sec. 0-78,74"/sec. - Guide channel lubricant ISO VG 68 - Compressed air required 8 bar - Weight 800 kg - Maximum rod length 3200 mm - 4100 mm
Breuning IRCO 65.8270.8R Multi-channel bar feeder max. bar length: 3000 mm bar diameter: 5 - 65 mm guide channels: 8 pieces Ø 25 , 32 , 38 , 42 , 50 , 56 , 60 , 65 Garwels machines and service The right choice B9to7s7 We would be pleased to make you an offer for our additional services - Transport of the machine - Assembly of the machine - Commissioning of the machine - instruction We are exactly the right contact for - repair - maintenance - service Our team is ready for you. Please also visit ...
ILS IRCO Breuning barfeeder offered. Bth2x8gn9m Type: RBK 10012 Power: 400 V Remote control: Esitron HBG 10 Year of built: 2014 Included documentation and software Dimensions: 200x100x140 cm LxWxH For more information call us or send an e-mail.
FMB 10-65 Turbo barfeeder from 1998. Machine is in good working condition. Complete with - Conversion kit of 25mm (new in 11/2010) - Conversion kit of 42mm (new in 04/2011) - Conversion kit of 65mm Bs9a9cbior - Several (new and used) collets. - Books and documentation
- max. bar length: 3.200 mm - guide channel: Ø 22 + 11 mm - was installed at TRAUB A 25 Br8ywymuo2 - storage capacity 300 mm (e.g. 30 bars x 10 mm) - min. length of bar: 1000 mm - bar changeover time: ca. 25 sek. - weight: ca. 750 kg - dimensions LxWxH: 4500 x 460 x 1500 mm
Specifications Processable bar diameters Min. Ø 10 mm - Max. Ø 61 mm Supply voltage 230 V trifase 50/60 Hz three phase Buadw8f3xd Feed speed 0 - 627 mm/sec. 0 - 24,70"/sec. Lubricating oil for guide channels ISO VG 100 Required compressed air 8 bar Weight 1.000 kg Bar length 2 m
Automatic lathe unloading machine Breuning IRCO ILS-REX 7212 max. bar length: 1200 mm Nvvfb Rod diameter max. 72 mm Garwels machines and service The right choice We would be pleased to make you an offer for our additional services - Transport - Design of the machine - Commissioning - Briefing We are exactly the right contact for - Repair - Maintenance - Service Our team is ready for you. Please also visit our website www garwels de
- max. bar length: 1.615 mm depending on the spindle length of the lathe - bar-Ø: 5-80 mm - axial shifting - bar location surface: 650 mm - portable control unit - NEVER RUNS IN PRODUCTION Beegff7c7h - dimensions LxWxH: 2260 x 1200 x 1400 mm - weight ca. 600 kg
Bar feeder Fabr. IEMCA type AS 325/32 Masch.# 87041309 built in 1987 Technical data: Dv98vu Rod sizes from 3-25 mm Rod length of max. 3210 mm Magazine capacity (E.g. 30 x 10 mm) 300 mm Feed speed 200-600 mm / sec. 1.0 kW Weight 530 kg External dimensions approx. 4470 x 460 x 1500 mm used, in very good condition
Material passage in the supply pipe max .: 65 mm for material lengths up to: 3000 mm Gvdgpg Feed force infinitely adjustable up to max .: 550 N. Charging time approx .: 30 s elec. Connection / power requirement: 380 V / 1.5 kW Space requirement: 5810 x 920 x 1515 mm Weight: 1200 kg