Used Zopf Zb 60 Md for sale (22,247)

Condition: used, Year of construction: 1993, 3 Rollers Bending Machine ZOPF TRENNJAEGER RS 302 ME Year of construction: 1993 Capacity: 1/4'' to 1 1/2'' - Ø 10 mm to Ø 60 mm Rectangular tube 50 x 30 x 3 Square tube 40 x 40 x 3 (see description on photo) Delivered with: 1 set of rollers 1'' - 6/4'' - 1 1/4'' + various (see photos) Nodpfxezwcnpo Afwsda Voltage: 380 V Dimensions (L x W x H): 1000 x 1000 x 1600 mm Weight: approx 200 kg

Condition: used, mileage: 467,100 km, power: 260 kW (353.50 HP), first registration: 01/2016, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1168 * S 516 MD * Retarder * French inspection certificate is available. * Currently fitted with 58 seats (no reclining seats) --> therefore, the number of seats can be increased. * An additional row of seats is included separately, allowing for 60 seats. * The following repairs were carried out at EVOBUS in June 2026: * Retarder replaced * Retarder control unit replaced * Exhaust gas recirculation valve replaced * Haldex separator replaced * 2 x V-belts replaced * Air reservoir with drain replaced Nsdpsxwr Apefx Afweda * Oil separator replaced * Cost: 8,500 EUR / net * In July 2026: Air conditioning service performed * Side matrix (without control unit) * Interior route display * Seats can be adjusted to face backwards * LIFT * Lifting mechanism - trunk lid on the right side * Storage compartments * Convector heater * Auxiliary heater * Air conditioning * Rear entrance * No toilet, no refrigerator. * Wheelchair-accessible bus * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in operation / mileage and condition may vary. * All information is subject to change without notice. * We reserve the right to sell the vehicle in the meantime. * We refer to our general terms and conditions.

Condition: new, roll diameter 350 mm 110 mm bending speed 1-5 m/min Ndsdsy H N Hgjpfx Afwja Bending capacity 157 Wcm³ total power requirement 7,5 kW weight of the machine ca. 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control Nsdpfx Afsm Nb Riowjda >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm >max. piece length 340 mm

Condition: new, Year of construction: 2025, Bending machine ZB 70/3 H ECO - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings Nsdpfxohmbh Hs Afwsda - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x650x1070 mm - colour RAL5012 / RAL7015

Condition: good (used), Year of construction: 1991, We are selling our Hydrap 160-ton press. The system is only available for sale as a complete unit. Operating hours: 20,242 Condition: good Ndsdotu Szlepfx Afwoa Inspection is possible and welcome. Location: Szügy / Hungary

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Ndjdjyt Eldspfx Afwja Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x800x1500 mm weight 450 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set Nodpfxey H N Hms Afwsda

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical Njdpfoy H N H Hjx Afwjda - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles

Condition: new, 80 mm roll diameter 260 mm 7 U/min 170 mm 27 kN 160 mm 450 mm total power requirement 3,7 kW dimensions 980x1430x1600 mm weight 1380 kg Accessories / equipment: Nsdpfsy H N Hyex Afwsda - Three driven rollers with a smooth surface - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can bend different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW range L-W-H 1100x850x1350 mm weight 495 kg Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings Ndedpoy H N Iksfx Afwja - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set

Condition: new, Year of construction: 2026, Maximum pressure: 40 tons Ndodjhgihkspfx Afwsa Stroke length: 250 mm Maximum speed: 10mm/sec Return speed: 20mm/sec Work table: 660x1250 mm Working height: 900 mm Oil tank: 60 Liter Maximum workpiece height: 250 mm Strip capacity: 200x26 mm Pipe capacity: 60x5.0 mm *not with standard tools - Digital limitation of the stroke and the return stroke. - NC control. - Hydraulic pressure adjustable - Bending speed adjustable - Completely closed table - The ZOPF construction makes it possible to change tools quickly and without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, which means that even under heavy load there is no loss of accuracy occurs. - With the universal tool holder and the various tools, you can work extremely flexibly.

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min Ndedpfxsgh T Hrs Afwea - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2023, mandrel bending machine ZB 55 H - mandrel length 2000 mm - pipe bender for tubes and profiles up to 54 mm - solid construction for heavy using standard equipment: - modern electromecanic movement - SPS control unit Ndsdpfod H Rhijx Afwsa - up to 1000 different programs - electronic measurement of length and angle - manual stop system - hydraulic tube clamping - adjustable hydraulic pressure - three jaw chuck - total power 5,2 KW - bending speed 28 degrees per second - min. bending radius 50 mm, max. bending radius 150 mm - minimum tube diameter 15 mm - 400 Volt 50 Hz 3 ph. - weight 900 kg HS-Code: 8462 2998

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: Nsdpfoy H N I Dox Afwsda - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Nsdpfjy H N H Tex Afweda Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. Ndjdpfx Aoqvm Ukefwja - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: BB 60, Tube Bender BB 60 - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed Njdpfx Afod Eywyjweda - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph.

Condition: new, 50 mm 8,5 U/min 100 kN roll diameter 162 mm Drive 1,5 kW weight 495 kg range L-W-H 1100x850x1100 mm Equipment / Accessories: Ndodpfx Aoy H N Hasfwja - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage

Year of construction: 1973, condition: excellent (used), turning length 125 mm weight of the machine ca. 0,4 t Nedpfx Aoxpxqwsfweda

Condition: new, roll diameter 215 mm shaft diameter 60 mm Shaft revolutions 6 U/min 100x2 mm 80x15 mm pressure hydraulic cylinder 180 kN total power requirement 2,2 kW weight 720 kg dimensions 1200x900x1700 mm Accessories / Equipment: Njdpfxjy H N E Aj Afweda - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, for sale second hand brick - machinery Handle -extruder 600/560 Händle and Mixer MDV920b -filermixer Händle -roller mill 800x800 Händle WFZ880a Ndjdpozmxi Uefx Afwja - conveyer 40m x 80 cm gummi

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Nedpfx Afshgiuhsweda Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: good (used), Year of construction: 2004, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, Hyster H3.00XM Duplo 460 Sideshift / Cascade Fork Positioner Perkins Diesel 2004 Video available via Whatsapp. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a changing inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can arrange a viewing and/or test drive without obligation. Nsdpfx Afeyk D Niewsda Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, shaft diameter 60 mm Shaft revolutions 6 U/min roll diameter 215 mm pressure hydraulic cylinder 180 kN dimensions 1125x870x1620 mm weight 820 kg Accessories / Equipment: Ndodpjy H N Evofx Afwsa - Three driven rollers - Hydraulic delivery of the upper roller - Working position horizontal and vertical - Digital display with memory function - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. It can bend various profiles flat iron, T-iron, solid material etc.