Pipe-Bending Machine

ZOPF ZB 70/2M

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings Todpfet Hwfnsx Al Asc - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run) Todpfx Ajt U R H Usl Ajc

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 Todoyx Dg Sjpfx Al Ajc -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions L x W x H 4100 x 2100 x 2100 mm -External dimensions (with rails) L 9970 x W 3060 x H (with lift-up door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at rated temperature without load) ±5°C Tsdpfx Aju Hma Nel Aoc -Automatic inlet and outlet air dampers -Electric lift-up door -Electrically driven hearth carriage -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be pleased to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enamelling furnace, drying oven, industrial furnace, heating chamber, heating oven, temperature oven, drying cabinet, chamber furnace, large-volume furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. Tjdpeghrguofx Al Asc The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Todpfx Ajtmqi Dol Aoc Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, Tubend hydraulic profile ring bending machine HPK 50 3 driven rollers Digital display Incl. standard roller set steel Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 3 driven rollers 3 motor-driven rollers Hydraulic infeed of the top roller Hydraulic: 8 tons Rollers are hardened Left/right rotation via foot pedal Mounting: shaft 50 mm Roller Ø 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection 400 V Todpfxeum R U Ae Al Aoc According to CE standard Weight 510 kg L.W.H. 810 x 950 x 1500mm Power table see PDF file

Year of construction: 2010, operating hours: 9,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Year of Man. 2010 Working hours 9500 Base carrier BAUER BT 45 Attachments : Vibrator MR 70 V general overhauled, Pre drilling rotary ABI MDBA 3500 Engine CAT313 kW Tsdpfeh Tyzmox Al Asc Aux winch Air condiion Good working condition !

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, working width: 250 mm, Coating machine / brush applicator Manufacturer: Ceetec Type: A 250 Automatic coating machine with brush application Workpiece dimensions: Width max. 250 mm Height max. approx. 100 mm Length from approx. 800 mm The coating machine is suitable for applying paints, wood preservatives, as well as oils and waxes (e.g., for exterior cladding, decking boards, etc.) Technical data: - electronic diaphragm pump (no compressed air required) - spray nozzles for all-round application of wood preservatives - 12 rotating applicator brushes on 8 axes (standard nylon bristles) for 4-sided application of coating materials Workpiece feed adjustable via feed roller, approx. 16-45 m/min. Capacity approx. 960 – 2500 meters/hour Power connection 3 × 380 V EU Machine weight approx. 350 kg Tsdsyuaptepfx Al Ajc The machine has been cleaned and technically inspected. Hose connections, diaphragm, and brush set have been renewed. Ready for immediate use!

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. Todom H Unhepfx Al Asc The weight of the machine itself is 44 tons, the total weight is 55 tons. I can send a lot of photos before dismentling.