Used Arc Feed Attachment for sale (17,465)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm Godpozvnpijfx Aanokb - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Sample images of the machines are attached.

Condition: used, Starrett HF750 (Shadowgraph) Gsdpfx Aaozy Rg Esnekb With Metronics - Quadra-Chek Control. 750mm/ 30" screen horizontal bench-top profile projector 12" x 8" X-Y travel workstage (300 x 200mm). Fully usable 762mm diameter screen with on screen overlay clips. Workstage capacity: 150kg maximum. 200mm power driven vertical travel with variable speed adjustment for fast and fine setting. Fibre optic surface illumination. Turret mounted condenser system complete with two lenses and yellow/green filter. Extended workstage to 500mm axis travel with 820mm x 200mm top plate, replacing 300mm travel stage. Digital screen protractor for accurate angular measurements reading to one minute of arc, via Q axis on DRO. Motorised precision workstage with 30mm x 230mm top plate. 300mm lateral travel with free run and fine control. NOTE - See Lot Description for Important Information on Final Bids and Equipment Collection. NOTE: Removed carefully in a working condition, however due to the nature of the machine, this is being sold as spares or repairs incase any damage was caused during relocation from the original building to storage. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful.

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 1.511.030, functionality: fully functional, planing width: 240 mm, spindle diameter: 40 mm, number of spindles: 6, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 6 Min. planing width: 44 mm Max. planing width: 240 mm Min. planing height: 18 mm Max. planing height: 150 mm Infeed table length: 1,150 mm Spindle 1 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 2 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 3 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 5 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 6 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Feed rate: Automatic Min. feed rate: 6 m/min Max. feed rate: 24.1 m/min Feed rate control: Stepless Conveyor motor power: 8.7 kW Conveyor drive: Cardan drive Diameter of feed rollers: 140 mm MACHINE DETAILS Control system: Schneider Voltage: 415 V Current consumption: 144.3 A Gedpfxjzxch Ee Aanekb Fuse rating: 200 A Connected load: 60 kW Diameter of dust extraction nozzle: 125 mm Lubrication system: Manual Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,800 mm Unladen weight: 2,000 kg Shipping packages: 1 unit

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 281008, A fully automatic round capper from ALWID is offered of the type FAVORIT 12SK The details of the machine: - Stainless steel design (frame, paneling, etc.) - Fully automatic cap sorting and cap feed - 12 screw heads with magnetic coupling and torque setting - The machine is suitable for line integration - Output: 2,000 - 24,000 bottles / h - Bottle height: 90 - 300mm - Suitable for plastic screw caps (only one format available) Only plastic bottles with plastic screw caps were processed on the machine. Gkjdpfotlrlxex Aansb The machine is currently not in use and can be viewed by arrangement at the production site in Thuringia. The machine layout including dimensions is attached as a PDF document.

Condition: used, Year of construction: 1997, machine/vehicle number: 971004, functionality: fully functional, input voltage: 230 V, input current: 24 A, input frequency: 50 Hz, type of input current: DC, year of last overhaul: 2026, Equipment: CE marking, 5 C – Schaeffer SH2000-160 Industrial Snap Fastening Machine – Dual Head Semi-Automatic Unit Description: For sale is a Schaeffer industrial snap fastening machine, model SH2000-160, designed for efficient attachment of metal snaps and similar fasteners in garment production. This industrial unit features a dual-head fastening system and semi-automatic operation modes, allowing improved productivity and consistent results compared to manual setups. The machine is equipped with a belt-driven mechanical press system and integrated control panel with selectable operating modes. The machine has been used in a professional garment factory environment and is being sold due to factory closure. Its construction enables stable and repeatable fastening operations, making it suitable for continuous production processes where consistency and efficiency are required. Includes: • Schaeffer SH2000-160 fastening machine • Dual-head fastening system • Integrated motor (Georgii Kobold) • Electrical control panel with operating modes • Hopper feeding capability • Heavy-duty pedestal base • Foot pedal control Technical details: • Manufacturer: Schaeffer GmbH (Germany) • Model: SH2000-160 • Dual-head configuration • Belt-driven mechanical press system • Operating modes: manual / automatic / hopper • Power supply: 3-phase (according to machine plate) Condition: Used industrial condition. Operational prior to factory shutdown. Sold as-is, where-is, without warranty. Inspection possible prior to dismantling. Typical applications: • Snap button / press stud attachment • Denim and workwear production • Outerwear manufacturing • Industrial garment production Sales terms: This equipment is sold due to factory closure and is being liquidated directly from production use. Sold as-is, where-is, without warranty. Buyer is responsible for: – ensuring suitability for own materials and production No claims accepted after sale. Removal & transport: Buyer responsible for dismantling and transport. Godpfxoy Aiafj Aanekb Serviced 27.2.2026. Video in working situation taken 5.3.2026.

Condition: ready for operation (used), Tool milling machine DECKEL FP 2 LB incl. 3-axis digital control (ACU-RITE) -Travel ranges X/Y/Z 795x300x400mm -Automatic longitudinal / transverse / planar feeds -Rapid traverse in all three axes -Spindle speeds 40 - 2000 rpm -Table clamping area 1000x440mm -Tilting table -Digital display, 3-axis (ACU-RITE) -Vertical - horizontal milling attachment -Vertical head with drilling quill -Tool holder ISO 40 -Coolant system -Machine lamp -Various tool holders -Machine documentation Dimensions: L x W x H 2.5 x 2.3 x 1.8 meters / Weight 2200 kg Errors and omissions excepted. Gkjdozu Nhwspfx Aanjb

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Gjdpfx Aezl Rqheanskb Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: good (used), Year of construction: 2008, functionality: fully functional, A fully automatic round capper from ALWID is offered Godpfx Aajtlttfjnokb of the type FAVORIT 4SK The details of the machine: - Stainless steel design (frame, paneling, etc.) - Fully automatic cap sorting and cap feed - 4 screwing heads with magnetic coupling and torque setting - The machine is suitable for line integration - Output: 2,000 - 8,000 bottles / h - Bottle height: 90 - 300mm - Suitable for plastic screw caps (three formats available) The machine was used to process glass and plastic bottles with plastic screw caps. The machine is currently not in use and can be viewed at the production site in Thuringia by arrangement. The machine layout including dimensions is attached as a PDF document.

Condition: reconditioned (used), Now in stock at Glendale we have this Morgana Major Folder. This Morgana Major is in perfect working condition having been refurbished by a Morgana trained engineer. It includes a recently replaced new motor and rollers. The sheet count is very low at just 283,000 sheets. This Major folder also includes the perforation and scoring unit. The Morgana Major has been designed to offer a wide range of ‘big machine’ features within a compact and easy to operate design. Changing from one size to another, or for different folds, can be accomplished in seconds. The Morgana Major incorporates counting and batching, with perforating and scoring as standard. A number of unique features have been developed to ensure that the Morgana Major can handle output from digital processes, as well as litho printing. The fold rollers are extremely durable and have the ability to handle a wide variety of stock without adjustment. Not affected by paper dust, their unique composite material will positively grip high gloss papers or work from digital print engines. The Dial-a-Fold plate settings enable all adjustments to be made without removing the covers. An LED display, accurate to 0.1mm, shows the fold plate position and allows easy and accurate repeat job settings. A powerful suction feed handles a wide range of coated or non-coated material and incorporates side lay alignment of the sheets before they enter the fold plates. The feed table also has a suction chamber to control curled or statically charged paper. Godpfx Aaev Hr D Nenjkb A larger sheet size of 365mm width and 648mm length makes the Morgana Major even more flexible, capable of producing 6pp A4 documents. The machine speed is fully adjustable from 4500 to 27,500 sheets per hour, giving the operator complete control over the production of a wide range of stocks. The plug-in perforator/scorer is included with this Morgana Major and work is delivered into a catch tray. Key Product Features • Powerful suction feeder handles a wide range of paper weights • Side lay alignment of the sheets, prior to folding • Low pressure suction chamber to control curled paper before it enters the fold rollers • Fully enclosed fold plates with ‘dial-a-fold’ and LED display, fitted with anti-static brushes, skew and micro adjustments • Plug in perforating and scoring attachment • Variable speed • Tray to catch work when perforating or scoring • Long delivery belt stacker • Counting & batching • Double sheet, anti jam detector Specifications Manufacturer Morgana Model Major Folder Condition Refurbished Stock Number 114925 Max sheet size 674mm x 365mm Min sheet size 148mm x 140mm (94mm with optional narrow sheet attachment) Max paper weight 240gsm (grain direction depending) Min paper weight 56gsm Feeder capacity 500 sheets 80gsm Feeder Suction Feed Speed 4,500 to 27,000 per hour Perforating & Scoring Attachment included Power requirements 240v 50/60hz Machine weight 120kgs Dimensions (L)1168mm x (W)493mm x (H)990mm

Year of construction: 2012, operating hours: 5,000 h, condition: used, functionality: fully functional, The Italforni TSC Tunnel Electric Stone Deck Conveyor Oven (31") is a premium, high-output commercial pizza oven that bridges the gap between traditional stone baking and automated conveyor convenience. It features a unique refractory ceramic stone conveyor belt that allows operators to cook genuine Italian-style stone-baked pizzas, flatbreads, and focaccia directly on the stone surface at high volumes. Key Specifications: According to technical data from Italforni and official suppliers like External Dimensions: 1100 mm (H) x 2520 mm (L) x 1200 mm (W) Internal Chamber Dimensions: 2500mm (L) x 870mm (W) x 110mm (H) Belt Width: 31 inches / 790 mm Weight: 420 kg Power Requirements: 34 kW, 415 V three-phase (requires a 63-amp feed) Hourly Production Output The 31-inch variable speed belt handles large quantities efficiently, achieving a standard bake time of roughly 3 minutes per pizza: Core Features: Static Heating Elements: Uses individually controlled top and bottom static Incoloy heating elements. This design provides up to 30% more cooking capacity compared to standard convection models. Precise Digital Controls: Features touchscreen menu programming with an accuracy of +/-1°C. Maximum cooking temperatures reach up to 450°C to 500°C. Energy Efficiency: Includes a built-in standby mode that lowers energy consumption by up to 50% during off-peak hours. Simplified Maintenance: Built with premium stainless steel, a self-diagnostic service function, and removable crumb-collecting trays for easy cleanup. Gkodpfx Aez Ad S Hsansb

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Gedpfezp E Sbjx Aanskb Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Gedpfxezzcc Is Aanekb Excellent condition

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Gkodpexx Tigefx Aansb Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: not inspected (used), Welding Technology Complete Package – Kemppi, Artec & Kemper MIG/MAG, TIG and electrode welding / Welding fume extraction / Oxy-fuel welding For sale is a comprehensive used welding technology complete package for professional workshop and industrial use. It includes welding machines for MIG/MAG, TIG and electrode welding, wire feeder, welding fume extraction and oxy-fuel / flame cutting equipment. Technical data: Kemppi RA 450 W MIG/MAG welding power source Manufacturer: Kemppi, Finland Model: RA 450 W Serial number: 6224531 Welding process: MIG/MAG Welding current range: 40–450 A 450 A / 36.5 V at 45% duty cycle 400 A / 34.0 V at 60% duty cycle 310 A / 29.5 V at 100% duty cycle Mains connection: 380 V / 50 Hz / 3-phase Integrated water cooling Mobile industrial design Kemppi FU 20 wire feeder Manufacturer: Kemppi, Finland Model: FU 20 Device type: MIG/MAG wire feeder Wire feed speed: stepless 0–18 m/min 2-cycle/4-cycle operation Suitable for Kemppi RA 450 W Artec TIG 250 AC/DC TIG welding machine Manufacturer: Artec / W-TEC Schweißtechnik GmbH, Bochum Model: TIG 250 AC/DC Factory number: 00301991 Welding process: WIG/TIG AC/DC Welding current range: 6–260 A 250 A at 60% duty cycle / 200 A at 100% duty cycle Open circuit voltage: 68 V Mains connection: 380 V / 50 Hz Power consumption: 14 kVA Protection class: IP23 AC/DC and pulse operation Water-cooled TIG torch with hose pack Mobile industrial design Artec GL 320 welding machine Manufacturer: Artec Model: GL 320 Welding current: up to 320 A Stepless welding current adjustment Adjustable arc dynamics Remote control connection Three-phase connection Mobile industrial design Kemper welding fume extraction unit Type 91510 Manufacturer: Kemper GmbH, Vreden Type: 91510 Machine number: 8708418 Gedpfx Aszwfppoanskb Device type: mobile welding fume extraction / filter unit Airflow rate: 1,200 m³/h Static pressure: 145 mm WS Power: 0.75 kW Rated current: 2.0 A Connection: 380 V / three-phase With two extraction hoses/arms and extraction hoods Mobile cutting / oxy-fuel flame cutting carriage Manufacturer / Type: not identifiable For oxy-fuel flame cutting and welding Design for oxygen and fuel gas Robust two-wheeled industrial design With hand cutting torch, pressure regulators / gauges and oxygen and fuel gas hoses Equipment / Scope of delivery: Kemppi RA 450 W Kemppi FU 20 wire feeder Artec TIG 250 AC/DC Artec GL 320 Kemper Type 91510 welding fume extraction unit Mobile cutting / torch carriage Oxy-fuel welding and flame cutting equipment TIG torch and hose pack MIG/MAG hose and connection packs Hand cutting torch Pressure regulators / gauges Oxygen / fuel gas hoses Connection and welding cables Further accessories as shown in the pictures Condition: Used. Optical condition as shown in the pictures. Normal age-related signs of wear are present. All machines, devices and accessories are offered in their existing condition. No functional test has been performed. The devices are explicitly understood to be untested. Items not explicitly mentioned or only shown in the background are not part of the sale. Shipping by freight forwarder possible. Changes, errors and prior sale reserved. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: E1361000, overall weight: 600 kg, load capacity: 8 kg, arm reach: 2,028 mm, pivoting range: 360 °, controller manufacturer: Fanuc, controller model: R-30iB Plus, teach pendant manufacturer: Fanuc, teach pendant model: Fanuc A05B-2256-C101#EGN, control cabinet width: 600 mm, control cabinet height: 600 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, welding current (max.): 400 A, Equipment: documentation/manual, Fully functional and in excellent condition robot welding cell. Fanuc arm and 2-axis positioner, Fronius powersource, wire feeding and push-pull torch. FANUC ARC Mate AM-100iC/8L robot R-30iB Plus controller FANUC 2-axis postitioner A05B-1220-J201-N, payload 500kg Fronius TPS 400i powersource with PMC package Gksdpjzu Irnefx Aanjb Thielmanni nozzle cleaner SICK curtains Installed 2021 Robot station is fully operational, in good condition and can be seen in use.

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Manufacturer - Wick und Schaefer GmbH. Gjdjza Eyuepfx Aanokb Model - MIN.FM.Servo. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high.

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Gsdpfx Aajzbyt Ejnokb Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1989, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, cutting height (max.): 130 mm, cutting width (max.): 230 mm, saw blade diameter: 380 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,200 rpm, total length: 5,200 mm, total width: 2,500 mm, total height: 1,800 mm, overall weight: 4,300 kg, table height: 850 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, We are offering this used WEINIG KR 230 E high-performance parallel trimming saw with automatic return, manufactured in 1989. Additional equipment: - Electronic 1-axis adjustment with digital target/actual value display including subtraction electronics - Attachment sleeve for multi-blade cutting Gedpfx Aozkhbbsanskb - Feed chain with screwed-on spikes - 2 lasers for indicating the saw blade position including adjustment spindle - Automatic cross and return conveyor - Central lubrication system Type: KR 230 E Year of manufacture: 1989 Machine No.: 24484 Serial No.: 91300 Order No.: 91307 Operating voltage: 380 V Frequency: 50 Hz Rated current: 50 A Wiring diagram No.: 862218 Weight: approx. 4,300 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1995, CNC Universal Milling and Drilling Machine Stock number: 3101 Manufacturer: Deckel MAHO Year of manufacture: 1996 Type: MH 600W Machine number: 662106 Operating hours: 33,066 h Control system: Heidenhain Travel ranges x-y-z: 600 – 400 – 450 mm Quill stroke: 80 mm Table: 900 x 480 mm Spindle speed range: 20 to 4,000 rpm Feed rate: 1 to 4,000 mm/min Rapid traverse x and z axes: 6,000 mm/min y axis: 5,000 mm/min Spindle mount: ISO 40 Tool magazine: 16 positions Equipment/accessories: Tool changer, 4th axis, various attachments Defects: Right-hand door needs to be straightened, discs on the right and left sides are missing Condition: good Gedpfxozg S Iqs Aanjkb Connection: 12 kW Weight: approx. 3.2 t Dimensions: 2,400 x 3,200 x 1,900 mm

Condition: ready for operation (used), Year of construction: 2017, total height: 1,900 mm, overall weight: 1,260 kg, This RAPID DGL 200-E sawing machine was manufactured in 2017. It features a manual swivel range from 45° to 90°, a 500mm saw blade, and pneumatic saw feed. It includes both horizontal and vertical clamping cylinders, enhancing its versatility. Dimensions for the 3700mm cutting length are 5250 x 1420 x 1900 mm, and it weighs 1260kg. A robust choice for diverse cutting needs. Contact us for further details regarding this sawing machine. Additional equipment • Pneumatic saw feed • Clamping device:2 horizontal clamping cylinders 2 vertical clamping cylinders Machine Benefits Qualitative Machine Benefits • The machine ran in two shifts for approximately 3 years and in one shift for the last few years. Technical Machine Benefits • Max blade diameter: 500 mm • Swivel range: manual 45° to 90° Gkodezvu Npjpfx Aanob • Cutting lengths: 3700 mm Extra Information Drive: 2 x 2.2 kW motors Unit adjustment: Motor-initiated Saw feed: Pneumatic Swivel range: 45-90°, manually adjustable Clamping device: Two horizontal clamping cylinders Control system: Prepared for the attachment of a Rapid control system Fixed center support to support the profiles Saw blades D=500 2x ball screw spindle for unit adjustment Smallest sawing dimension: approx. 310 mm Equipment: DGL-200/R600 ELEKTRONIK with ATV 32 DGL200SE VERT. CLAMP NO. M. AGAINST DGL-200E DGL200TK SHORT T. CONNECTION DGL-200RB Movable roller conveyor, width 215 mm DGL-200E CONNECTION 2.2KW Preparation for FRENIC EXTRACTION CONNECTION Socket connection for extraction up to max. 2.2 kW prepared at the factory DGL200VP - PLANK PACK. FIXED CONTROL PANEL DG1.200 Dimensions Machine Depth 5250 mm

Condition: used, Year of construction: 2022, power: 13 kW (17.68 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 8,500 kg, We are offering this used KiMLA BPF 2171 4-axis CNC machining center, manufactured in 2022. The package includes a KOGI dust extraction unit in a two-bag configuration (2.2 kW / 1,650 Pa), SCHMALZ distance and vacuum suction cups (suitable for 4-axis operation), an adjustable angular head for 4-axis machining, and a wide range of additional accessories. A valuation report is attached. Key features 4-axis machine – wide machining capabilities HSD 9 kW spindle, 24,000 rpm, ISO30 Automatic tool changer Dual vacuum foot with automatic lowering system Working area: 2,100 × 7,100 mm Tandem working mode: simultaneous machining on one side of the table while loading/unloading parts on the other, significantly increasing productivity Large working area enabling machining of non-standard and extra-long parts Pneumatic positioning pin system for fast and precise material positioning SCHMALZ vacuum cups for high-quality workpiece holding Condition and usage Machine currently in continuous production (can be inspected in operation) Regularly serviced Ready for immediate deployment Inspection in person or video presentation is possible. Additional equipment Chip extraction system included Optional (separate offer) Becker VariAir Control vacuum system Possibility to operate 2–3 CNC centers simultaneously, significantly improving energy efficiency Machine data Type: BPF Model: 2171 Serial number: 3586 Year of manufacture: 2022 Power supply: ~400 V Frequency: 50 Hz Power: 13 kW Weight: 8,500 kg Air pressure: 8 bar Axis travel (X × Y): 2,100 × 7,100 mm Z-axis travel: 400 mm Spindle: HSD 9 kW, 24,000 rpm, ISO30 Table type: Vacuum table Control system: 3D control module Drives: Digital AC servo drives Technology: High-Speed Machining (HSM) Tool length correction sensor included Godsy Exytepfx Aanokb Control computer and operator panel included C-axis for angular aggregates Adjustable angle aggregate Extraction hood with support foot Automatic tool changer Rotary tool magazine Positioning pins, automatic (2 × 7 pcs) Base positioning pins (4 pcs) 6 SCHMALZ vacuum cups (single-ring type) PC-CAM machine control software Control system with dynamic toolpath optimization improving cutting smoothness and feed dynamics Integrated CAD/CAM module for part design and toolpath generation Remote diagnostics via internet Electronic gantry angle correction 20 kHz position controller frequency enabling higher dynamics, especially in curves Direct support for .dxf and .dwg files in control system Real-time hardware interpolation via control computer Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 Godpfx Aaoy Tzhpjnekb - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: excellent (used), Year of construction: 2018, 2018 Prima Power Platino Fiber PLTF 1530 CNC Laser Cutting Machine With O.M.S Sordella Pallet Loading System with Siemens Touch Simatic HMI Gjdozvc I Hopfx Aanekb With IPG Laser YLS-4000 4,000 Watt high Power Laser. Working Area 'X'=3,048mm, 'Y'=1,524mm. Maximum Table Load 1,050kg. Axis Travel 'X'=3,065mm, 'Y'=1,565mm, 'Z'=150mm. Maximum Feed 'X,Y'=100m/min, Trajectory 'X, Y'=140m/min. Trajectory Acceleration 17m/s2. Positioning Accuracy (Pa) & Repeatability (Ps) According To VDI/DGQ 3441 Standards* 'X, Y'=0.03mm. Working Hours 57,510. S/No. P5.03.00.01 (2018). Pallet Loading Capacity 10 Pallets, Maximum Weight On Loading System 3,300kg. With Sick M4000 Safety Light Curtain, Cosmotec Chiller Unit, Chiller Unit, Internal Camera & Manual. Overall Dimensions L10,600 x W3,450 x H2,185mm. Weight 10,000kg. Note: Machine Has Full Service History Records Since Purchase 2018.

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Gkjdpswu Nw Uefx Aaneb Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Gkjdpfx Aaszx Anxjneb Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting