Used Arc Feed Attachment for sale (15,988)

Condition: used, used, good conditionmake Stegherrtype BVspeeds infinitely variable 3 - 18 m/rage location 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as viewed,without guarantee and warranty Nlodpfxevwfn As Ahzsb

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Number of heating elements: 4 Power (per heater): approx. 10 kW (230 V/400 V) Max. temperature: 700 °C Max. process temperature: 600 °C Thermocouple: Type K Temperature control: PLC software-based regulation Thyristor controller: AEG Thyro 1A-230-60H Nsdpfx Ajy Htgwehzslb Cooling (chamber): Consumption 2: (4.0...8.5) m³/h Inlet temperature: (15...18) °C Outlet temperature: (20...28) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l Cooling (evaporator): Consumption 3: (1.5...2.5) m³/h Inlet temperature: (6...10) °C Outlet temperature: (12...15) °C Pressure: (3.5...4.5) bar Water quality: mechanically clean, visually clear pH value (at 20 °C): (6.5...8) Max. particle size: < 25 μm Water hardness: < 15 °dH Chloride ions: < 80 mg/l Total chloride and sulfate content: < 160 mg/l

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Nlodpfxj Sdrfj Ahzob space needed: 820 x 1220 x 930 mm weight: 750 kg

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier Nodpfx Ahei Huvhjzslb -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1270, overall weight: 280 kg, table length: 457 mm, table width: 660 mm, Electro-Discharge Drilling Machine (Disintegrator) ELECTRO ARC 2-DBQT FOR SPARK ERODING BROKEN DRILLS AND TAPS Ideal for quickly and cleanly removing broken taps, drills, studs, and screws with precision, while leaving the surrounding material intact. - Year of manufacture: 1999 - For taps M1.6 to M38 - For drills Ø1 to Ø38 - 1x collet Ø4 mm - 1x collet Ø4.5 mm - 1x collet Ø5 mm Njdpfx Aeymw Spjhzelb - 2x collets Ø6 mm - 380 V - 10 kVA - 15 A - 50 Hz - Serial No.: 1270 Free loaded onto truck

Condition: excellent (used), 1) Main Welding Station – ACR6-P Type: Rotary welding station for narrow groove (Narrow Gap) Axes: 4-axis rotary system Control: Beckhoff CNC / HMI Weld monitoring: Stenning Video Weld Monitor System Approximate footprint: approx. 10,000 mm × 6,500 mm 2) Welder / Power Source Miller XMT 456 CC/CV — backup unit Type: CC/CV welding power source (MMA / MIG / FCAW / TIG – depending on equipment) Type: Multiprocessing Power supply: 400 V (via attached transformer) 3) Power Transformer Voltage: 400 V Dimensions: 970 × 760 × 1,200 mm (H) Application: powering machines in the welding station 4) Power Sockets Quantity: 3 × 415 V Mounting: on aluminium frame Nljdpfx Ahjx Upf Sjzeb 5) Welding Lathe Dimensions: 3,000 mm × 1,200 mm × 780 mm (H) Purpose: rotary positioning of workpieces for circumferential/narrow gap welding 6) Heavy Duty Work Table Dimensions: 900 mm × 600 mm × 600 mm (H) Design: robust, industrial-grade 7) Curtains and Guarding System Welding curtains: included KEMPER system: adjustable, 50 kg, wide range of adjustment

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 330 kg, load capacity: 6 kg, arm reach: 1,373 mm, controller manufacturer: Fanuc, controller model: R-J3IB Mate, teach pendant manufacturer: Fanuc, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.08 mm, industrial robot 6 axis FANUC Arc Mate 100i Be 6kg load capacity loading or welding robot for sale Robot FANUC Arc Mate 100iBe Robot Model A05B-1215-B651 year of manufacture: 2008 Axis: 6 Load capacity: 6 kg Reach: 1373 mm Repeatability: ±0.08 mm Robot weight: 238 kg Structure: Articulated Mounting: Floor Controller: R-J3IB Mate Control cabinet: AO5B-2445-B200 Electric power: 3kw 50 Hz 380v Nlsdpfx Aoyf Ha Tshzob year of manufacture: 2008/06 Weight: 100kg

Condition: new, 0.6m3 Polyp attachment from stock Nledpevk Dv Esfx Ahzsb Rotation is not included

Condition: not inspected (used), Year of construction: 1959, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 mm to 56 mm Ram adjustability: 30 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Feed hopper (diameter: 500 mm) External reference: 36 Nodpfx Ajy D S H Rohzjlb

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, pressing force: 8 t, stroke length: 56 mm, total length: 1,600 mm, total width: 1,000 mm, overall weight: 300 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obliges prompt collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Press force: 8 t Adjustable stroke: 8 to 56 mm Ram adjustment: 30 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,000 x 1,500 mm Weight: 300 kg EQUIPMENT Nljdpfx Ahsy D S A Eszjb Feeder bowl (diameter: 500 mm) External reference: 37

Condition: not inspected (used), Year of construction: 1956, machine/vehicle number: 9904, functionality: unexamined, pressing force: 8 t, stroke length: 70 mm, table width: 350 mm, table length: 440 mm, overall weight: 600 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pressing force: 8 t Adjustable stroke: 8 - 70 mm Ram adjustment: 30 mm Table dimensions: 440 x 350 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,300 x 1,100 x 1,300 mm Weight: 600 kg EQUIPMENT Nsdjy D Sp Sopfx Ahzjlb Conveyor by manufacturer RNA (diameter: 550 mm) External reference: 62

Condition: not inspected (used), Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0278, turning diameter over cross slide: 240 mm, turning diameter over bed slide: 400 mm, center height: 120 mm, spindle speed (max.): 2,000 rpm, bar passage: 53 mm, No reserve price – guaranteed sale to the highest bidder! Bidding commits you to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Swing diameter over bed: 400 mm Swing diameter over cross-slide: 240 mm Spindle speed: 45 - 2,000 rpm Spindle bore: 53 mm Centre distance: 1,000 mm Centre height over bed: 200 mm Centre height over cross-slide: 120 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 900 x 1,600 mm Machine weight: 1,500 kg EQUIPMENT Nlsdpfxsy D Sdie Ahzeb Tailstock Multifix quick-change toolpost Three-jaw chuck (diameter: 200 mm) + additional three-jaw chuck Toolholder Turning tools Indexable inserts External reference: 11

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 1,200 mm, rotational speed (max.): 3,000 rpm, machine/vehicle number: 05133, No reserve price – guaranteed sale to the highest bidder! Nledpfx Ahsy D Nhljzeb Placing a bid obligates the buyer to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Speed: 3,000 rpm MACHINE DETAILS Rated voltage: 200 V Frequency: 50 Hz Rated current: 3.77 A Power: 753 VA Vibration frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 1,200 mm Weight: 80 kg External reference: 61

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. Nlodpey Urtfjfx Ahzob The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Feed unit WGOMA VS 34 – used – including stand ----- Technical data ----- Rollers: 3 pieces, Number of speeds: 4 Nledpfew Nv N Sex Ahzob

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos Nedpfxoq Hr Rze Ahzolb - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets

Condition: ready for operation (used), Year of construction: 2021, load capacity: 1,400 kg, Brand: KAUP Model: 4.5T413 Nlsdpfey Tw Thex Ahzeb Year of manufacture: 05/2021 Load capacity: 1400 kg Widest opening distance: 168.5 cm FEM 2 Condition: very good

Condition: used, Year of construction: 2022, functionality: unexamined, machine/vehicle number: R22620E82, overall weight: 1,100 kg, load capacity: 12 kg, arm reach: 2,272 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, repeat accuracy: 0.03 mm, Equipment: documentation/manual, ARC Mate 120iD/12L Njdpfx Ahjy T Uh Aezjlb

Condition: used, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm Nedpfx Aewnhabehzslb - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis OTC Daihen EASY ARC V02.04 was manufactured in 2019. It features a robot working range with a radius of 1,445 mm and a maximum payload of 6 kg. The integrated welding table measures approximately 2,200 mm in width and 1,100 mm in depth, with a load capacity of around 1,000 kg. If you are looking to get high-quality welding capabilities, consider the OTC Daihen EASY ARC V02.04 welding robot we have for sale. Contact us for further details. - System Type: Mobile Robotic Welding Cell (EasyArc)- Robot Kinematics: 6-axis vertical articulated robot- Robot Payload: 6 kg (Max. upper arm load: 10 kg)- Robot Working Range (P-Point): Radius 1,445 mm- Robot Repeatability: ±0.08 mm (Path), ±0.2 mm (Point)- Robot Drive System: AC Servo Motor- Robot Weight: 145 kg- Welding Power Source Model: OTC Daihen Welbee Inverter P400 (MIG/MAG, Gas-cooled)- Power Source Mains Voltage: 3 x 400 V / 50 Hz (+/- 15%)- Power Source Rated Input Capacity: 18.2 kVA- Welding Current Range: 30 - 400 A- Welding Voltage Range: 12 - 34 V- Power Source Duty Cycle: 400 A at 30%- Robot Controller: OTC Daihen FD11 (Model: EAFDB6-S000, Rated Input: 3.1 kVA, Phases: 3, Voltage: 400 V, Freq: 50/60 Hz, Mass: 60 kg)- Safety Enclosure: Lightweight protective housing with setup and loading doors equipped with electric safety interlocking switches- Welding Table: Integrated hole-pattern welding plate table prepared for clamping elements (Dimensions: ~2,200 mm width x 1,100 mm depth, Weight: ~600 kg, Load Capacity: ~1,000 kg)- Table Mobility: Legs equipped with swivel guide rollers and locking brakes- Horizontal Rotary Positioner: OTC Positioner PB Type (Max. payload 250 kg, Rotation speed 26°/s, Torque 205 Nm, Repeatability ±0.1 mm, Weight 110 kg, central bore in flange plate for media feed-through)- Environmental Conditions: Operating temp 0-45 °C, Humidity 20-80% (non-condensing)- max. 100 operating hours- 1 electronic axis is defective and needs to be repaired Njdpfx Ahsy T Iyfjzslb

Year of construction: 2012, condition: excellent (used), 1 used feed water tank ----- cylindrical, horizontal on saddle feet, insulated with degaser Nledpfx Ahsmfq Rkezjb capacity approx. : 5.900 ltr max. allow. work. pressure : 0 / + 6 bar max. allow. work. temp. : 0 / + 200°C year of construction : 2012

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Nljdokpwuujpfx Ahzjb Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm Njdpfxou Ic Ewj Ahzelb number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Technical details: welding current: 330A / 50% und 210A / 100% protection class: IP 23 total power requirement: 13,8 kVA weight of the machine approx.: 71 kg dimensions of machine: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG and electrode - cooling method water-cooled AF - insulation class B - power range 3A / 20V to 330A / 34V - wire feeder DS III (wire Ø 0,8 - 1,6mm) optinal possible! Nledpfxju Nxv Io Ahzeb Steuerung über Roboterinterface *

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Nedpfxsvgbgao Ahzolb Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *