Used Arctiko Ultf 80 for sale (16,791)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Bodey Hkd Hspfx Al Ijlg Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 8,000 kg, lifting height: 5,070 mm, free lift: 1,615 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 81 kW (110.13 HP), fork carriage width: 2,200 mm, fork length: 1,200 mm, empty load weight: 12,169 kg, total length: 3,970 mm, drive type: Diesel, construction width: 2,200 mm, Diesel Forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Condition: New machine Technical condition: New Front tire type: Superelastic Blsdjy Hm Dcspfx Al Isg Rear tire type: Superelastic Description: - 2.9-liter HMC D4CC diesel engine, 81 kW, EU Stage V - Common Rail incl. DOC, SCR, and DPF - Kessler front axle - ZF transmission - Engine power selector - Reduced noise level in the cabin - Multifunctional digital display - Air conditioning with multiple air vents - Improved visibility thanks to one-piece curved windshield - Automatic parking brake: OPSS system - Speed limiter - Slope indicator - Easy maintenance access - Tiltable cabin with heating and A/C - Engine self-diagnosis and consumables management - Automatic particulate filter and SCR regeneration - Grammer seat with belt, contact switch, and armrest 3rd valve, 4th valve, rear work lights, front work lights, heater, load guard, particulate filter, full cabin, air conditioning, full free lift, CE certificate, twin tires, interior mirror, exterior mirrors, windshield wiper, single pedal, LED, seat,

Condition: excellent (used), Year of construction: 2018, turning diameter over cross slide: 800 mm, spindle bore: 92 mm, turning diameter: 800 mm, turning length: 6,000 mm, total length: 9,000 mm, total width: 1,900 mm, total height: 2,100 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 14 rpm, HeidenHain ND-780 with 3 axis Read-outX, Zo, Z  HeidenHain LS388C Scales 2 x CE Chuck covers for 500 & 900 mm SCHUNK 3 chuck Ø 400-102  Bison 4 chuck.... Steady rest Ø 30 - 210 mm Steady rest Ø 210 - 370 mm DBC Turning Length: 6000mm Swing over bed Ø: 800mm Swing over cross slide Ø:520mm Swing in the gap Ø: 870mm Bjdovn Svuopfx Al Iolg Gap length: 320mm Spindle bore: 92mm Spindle power: 15kW Bed width: 550mm Spindle taper: 6Mk Speeds / ranges: 14 - 1400rpm Length: 9000mm Width: 1900mm Height: 2100mm Weight: 7670kg

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 6 h, lifting height: 6,500 mm, fuel type: diesel, mast type: triplex, power: 85 kW (115.57 HP), motor manufacturer: Deutz, total height: 3,550 mm, total length: 4,050 mm, total width: 2,260 mm, color: other, General information Year of manufacture: 2024 Blodpfx Alexyuuts Ijg Technical information Number of cylinders: 4 Engine capacity: 4.038 cc Empty weight: 14.807 kg Engine type: Deutz TCD 4.1 L4 Functional Lifting capacity: 8.000 kg CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Blower - Freelift - Non marking tires - Side shift - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Germany Condition CE type: CE Kaup fork positioner & side shift, 2400 mm forks, Trelleborg non-marking tires, Closed cabin with heating, Road lighting, Work lights

Condition: excellent (used), Year of construction: 2023, operating hours: 1,108 h, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, total height: 3,210 mm, total length: 6,350 mm, total width: 2,260 mm, color: other, Year of manufacture: 2023 Empty weight: 16.539 kg Lifting capacity: 8.000 kg CE mark: yes Technical condition: very good Bsdpfx Alew U U Aho Ijlg Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit - Blower - Freelift - Non marking tires - Side shift - Work lamp(s) = Remarks = General Country of production: Germany Condition CE type: CE Kaup forkpositioner and side-shift, Forks 2400 mm, Battery charger, Non marking tyres

Condition: new, Year of construction: 2019, operating hours: 174 h, load capacity: 8,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, construction height: 2,750 mm, Manufacturer + model: KALMAR ECG 80 - 6 Mast: 3F4700 ID: 25106.8337 Category: Demo Mast: 3F4700 Forks: 2400 mm Lowered height: 2750 mm Lifting height: 4700 mm Capacity: 8000 kg Year: 2019 Operating hours: 174 hours Battery: 80 V / 1550 Ah - Year 2019 Bsdey Itdropfx Al Ielg Options - FULL cabin (safety gates) - Joystick control forwards/backwards - Spreader / sideshift - Complete road lighting!! - LED work lamp - Triplex FFL mast - Flashing beacon Complete, LIKE NEW!!!!

Condition: like new (used), Year of construction: 2004, operating hours: 6,090 h, load capacity: 8,000 kg, lifting height: 5,700 mm, fuel type: electric, mast type: duplex, construction height: 4,100 mm, Manufacturer + model: KALMAR ECE 80 - 6 Mast: 2F5750 ID: 24051.5020 Category: Used Mast: 2F5750 Forks: 2400 mm Lowered height: 4100 mm Lifting height: 5750 mm Capacity: 8000 kg Year: 2004 Operating hours: 6090 hrs Battery: 80 V / 1550 - NEW - Mfg. 09/2024 Options: - FULL cabin - LINDE steering - Duo pedal!!! Bodpfx Aoy Itdlel Ijlg - Spreader / S.s. - Spotlight - Duplex FFL mast - Completely NEW -> FEM 4 A - FORKS

Condition: like new (used), Year of construction: 2016, operating hours: 1,234 h, load capacity: 8,000 kg, fuel type: electric, Manufacturer + model: LINDE P 80 (1191) Tow tractor ID: 24073.0301 Bjdey Itamepfx Al Ijlg Category: Demo Capacity: 8000 kg Year: 2016 Hours: 1234 hours Battery: Completely NEW * 48V / 375Ah * Year 2026 Options: FULL cabin!! HEATING!! Condition LIKE NEW

Condition: new, The double-sided cantilever rack by BLT, with a height of 315 cm, is ideally suited for storing medium-weight long goods such as profiles, pipes, and bars in warehouses, workshops, or craft businesses. With an approximate rack length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack offers clearly arranged and easily accessible storage space for long and bulky items on both sides. Each cantilever arm can support up to 500 kg, and each upright can handle up to 1,800 kg per side. The bolt-on cantilever arms with deflectors ensure robust and practical use in day-to-day operations. Made in Germany. Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with even load distribution) - Load per upright: max. 1,800 kg per side (without base level, with even load distribution) - Levels per side: base + 4 storage levels (5 levels per side total) - Design: Double-sided, bolt-on cantilever arms with deflectors - Upright profile: IPE140 Bsdpfxey Ixuij Al Iolg - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacturing: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3,150 mm - 40 × cantilever arms, approx. 80 cm length, made from IPE80 - Including mounting hardware - Including heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design for storage space accessible from both sides - Bolt-on cantilever arms with deflectors - 5 levels per side, including base, for optimal use of storage space - Up to 500 kg load capacity per arm and up to 1,800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany included Delivery: - Freight within Germany included - Delivery includes mounting hardware - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation for your individual storage solution. Inform us of your required dimensions, stored goods, and available space. Our experienced consultants are happy to provide you with a non-binding offer featuring custom planning and structural calculation for your bespoke cantilever racking system. Use our enquiry list or contact us directly by phone. Together, we will plan your tailor-made racking system.

Condition: good (used), Year of construction: 2012, functionality: fully functional, - Max. bar length: 1,615 mm Bljdsy Hth Uepfx Al Isg depending on the spindle of the automatic lathe - Material diameter: 5-80 mm - Material support surface: 650 mm - Dimensions LxWxH: 2260 x 1200 x 1400 mm - Weight approx. 600 kg

Condition: new, Year of construction: 2022, 9.56 linear meters Wide Span Rack, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Rack offer includes: - 06 x frames approx. 200 x 60 cm, disassembled - 40 x crossbeams approx. 185 cm - 20 x shelf panels approx. 184.5 x 79.5 cm - 40 x cross braces (approx. 80 cm, galvanized) - Includes locking pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - New stock, available from warehouse - Other quantities available on request Pre-assembly of the frames can be carried out by us for a small additional charge of €6 net per unit. Blodpfsy Iwxasx Al Iog Delivery is available at a favorable rate upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €1,242.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Shipping: Delivery by our partner shipping company is available on request; costs are based on your postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you throughout your project—from planning and ordering to installation.

Condition: new, Year of construction: 2022, 1.95 linear meters wide-span rack, 80 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 1.95 linear meters Rack offer consists of: - 02 x frames approx. 200 x 80 cm, disassembled - 08 x beams approx. 185 cm - 04 x shelf panels approx. 184.5 x 79.5 cm - 08 x support bars (approx. 80 cm, galvanized) - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf level with evenly distributed load - Levels: 4 storage levels Bledpfx Aey Iww Ael Ijg - Chipboard, natural finish - Blue uprights - New stock item - Other quantities available! Pre-assembly of frames can be carried out by us for a small surcharge of €6/net per unit. Delivery can be arranged at a favorable cost upon request. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €278 net plus statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner freight company on request; cost depends on postal code. Assembly: Our trained personnel are at your disposal for the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements... We are pleased to assist you in realizing your projects—from planning and ordering to final assembly.

Condition: new, Year of construction: 2022, 7.65 linear meters wide-span shelving, 80 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 9.56 linear meters Shelving package includes: - 05 x frames, approx. 200 x 60 cm, disassembled - 32 x beams, approx. 185 cm - 16 x shelf panels, approx. 184.5 x 79.5 cm - 32 x support bars (approx. 80 cm, galvanized) - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Chipboard, natural finish - Uprights blue - New goods, available from stock - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6/net each. Delivery available on request at competitive rates. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,001.00 net plus VAT as required by law. You will receive an invoice with VAT shown separately. Transport: Delivery is performed as requested by our partner shipping company; cost depends on postal code. Assembly: Our trained staff are at your disposal, providing professional assembly and disassembly of your facility as needed. Bljdpfjy Iwwcex Al Ijg Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Condition: new, Year of construction: 2022, 3.85 linear meters Wide-span Shelf, 80 cm Deep Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 3.85 linear meters Shelf offer includes: - 03 x Frames approx. 200 x 80 cm, disassembled - 12 x Beams approx. 185 cm - 06 x Shelf boards approx. 184.5 x 79.5 cm - 12 x Bottom braces (approx. 80 cm, galvanized) - Including safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 3 storage levels - Chipboard, natural finish - Uprights blue - New in stock - Other quantities available! Optional: Assembled frames available for a small extra charge of €6 net per piece. Blsdpfx Asy Iwv Sel Isg Delivery available on request at competitive rates. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES -- Price: 417 € net plus legally applicable VAT You will receive an invoice with shown VAT. Transport: Delivery is provided upon request by our partner freight forwarder. Costs depend on postcode. Assembly: Our trained personnel are available to assist you with professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm Blsdjy Iwv Espfx Al Iog - Length : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 180 x traverse approx. 185 cm. - 090 x support shelf approx. 184.5 x 79.5 cm. - 180 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5737,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 13.35 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 13.35 running meters Shelf offer consisting of: - 08 x frame approx. 200 x 80 cm, disassembled. - 56 x traverse approx. 185 cm. - 28 x support shelf approx. 184.5 x 79.5 cm. - 56 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1724,00 € net Blsdpfjy Iwuzox Al Ijg plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 11.45 m Long-Span Racking, 80 cm Deep – Workshop Shelving, Warehouse Racking, Wide Span Shelving, Manual Storage, Shelving Systems, Small Parts Storage Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 11.45 linear meters Rack offer includes: - 07 x frames, approx. 200 x 80 cm, disassembled - 36 x beams, approx. 185 cm Blsdpfey Iwunex Al Ijg - 18 x shelf panels, approx. 184.5 x 79.5 cm - 36 x load distribution bars/crossbars - Incl. safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 3 storage levels - Shelves made from natural chipboard - Uprights in blue - Galvanized crossbars - New stock, available from warehouse - Other quantities available! Pre-assembly of the frames can be carried out by us for a small additional charge of €6.00/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,175.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Delivery: Delivery can be arranged by our partner freight forwarder on request. Cost depends on the delivery postcode. Assembly: Our trained personnel can assist you with professional assembly and disassembly of your equipment as required. Our recommendation: Let us know your requirements… We are happy to support you in realizing your projects, from planning to ordering and installation.

Condition: new, Year of construction: 2022, 57 running meters Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage , Data : - H : approx. 200 cm - D : approx. 80 cm - L : approx. 57 running meters Shelf offer consisting of: - 031 x frame approx. 200 x 80 cm, disassembled. - 240 x traverse approx. 185 cm. Bsdpfx Aley Iwube Islg - 120 x support shelf approx. 184.5 x 79.5 cm. - 240 x joist / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 4 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 7267,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, 28.55 rm. Wide span shelving 80 cm deep , Workshop shelving , Storage shelving , Large shelving , Manual storage , Shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 80 cm - Length : approx. 28.55 running meters Shelf offer consisting of: - 16 x frame approx. 200 x 80 cm, disassembled. - 90 x crossbar approx. 185 cm. - 45 x support shelf approx. 184.5 x 79.5 cm. - 90 x beam / load distributor. - Incl. safety pins - Model : BLT , Type WR20/80 - Load: 400 kg shelf load, with evenly distributed load. - Levels: 3 x storage levels. - Chipboard, natural. - Uprights blue. - Galvanized beam - New from stock. - other quantities available! We can pre-assemble the frames for a small surcharge of 6€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Bljdpfxsy Iwtws Al Iog Price : 2887,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2025, Horizontal thin-cut band saw 400 mm working width Bsdpfxsy Dpn Ej Al Islg New 2024 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: used, Year of construction: 2001, Amada HFE 80-25 SL Hydraulic Press Brake. S/No. VO11137 (2001), Remanufactured JTES 2018 Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Bodpfx Asy D Rhysl Ijlg

Condition: used, Year of construction: 2022, Bystronic Xpress 80/2100 Hydraulic Press Brake. S/No. Xpress 22334EU (10/2022), Max Press Force 800KN, Max Working Length 2100mm, Max Stroke 200mm, Machine Weight 6000kg Location: These lots are located in Yeovil, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Bjdey D Rbaspfx Al Ijlg

Condition: good (used), Used press brake by Donewell / Safan Bjdpfey A Ey Iox Al Ijlg Model 80 3100 Capacity 3100 x 80 tons 1 set of tooling

Condition: like new (used), Year of construction: 2004, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstoke CNC Press brake Year 2004 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Bedou A Dgrjpfx Al Ijlg Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Blsdpjyzy D Eofx Al Ieg Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW