Used Baumann Gx 80/12/60 Tr for sale (58,560)

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Bsdpfezt N R Nsx Al Ajwu

Condition: new, functionality: fully functional, machine/vehicle number: 11696, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 5,700 mm, free lift: 1,865 mm, fuel type: diesel, mast type: triplex, construction height: 2,890 mm, power: 85 kW (115.57 HP), fork carriage width: 1,520 mm, fork length: 1,600 mm, total length: 5,000 mm, drive type: Diesel, construction width: 2,470 mm, Side loader Chassis number: 11696 Load center: 800 Fork width: 200 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Rexroth hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Solid rubber Front tire size: 355/65-15 Front tire condition: New Rear tire type: Solid rubber Rear tire size: 355/65-15 Rear tire condition: New Bodpfxoyhm Iij Al Aowu Spreader beam with manually foldable forks – Residual capacity with spreader beam 6,000 kg @LC800 Rotating beacon and reverse alarm (standard) 870 mm wide cab with sliding window on the door No. 4 Load post protections (height 1,800 mm) No. 2 LED working lights on the mast (deck direction) Differential lock system (ASR) Centralized (manual) lubrication system at 4 points (one front, one rear, and 2 points on the mast) Winter package (engine, hydraulic oils, battery pre-heaters)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, load capacity: 6,000 kg, fuel type: diesel, motor manufacturer: Perkins, overall weight: 9,400 kg, Equipment: cabin, - Water-cooled-engine and starts well - manually operated directional control valves for up, down, balance and extend the fork and retract it Bwodpjzzw Raofx Al Aou - brakes work

Condition: used, Table dimensions: 1800 x 550 mm Bwjdpfx Ajzg Ec Ujl Aju Magnetic table: SELTER SN 5536 Magnetic table dimensions: 1210 x 610 mm Grindable dimensions: 1200 x 550 mm Maximum transverse travel: approx. 500 mm Maximum grinding weight: 1200 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Bwsdpfxeukhlto Al Aeu Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Bwodexwmacspfx Al Asu Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 8,935 h, load capacity: 4,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, drive type: Diesel, Side loader ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Bodpfx Ajz Ddfyol Aewu Condition: Ready for use and fully functional Technical condition: good

Condition: used, Indramat TRK 6-4U-380/60-G0 TSS10/633 Bedoz Hz N Uopfx Al Aswu

Condition: used, functionality: fully functional, machine/vehicle number: 6323, Year of construction: 2004, operating hours: 9,825 h, load capacity: 4,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,850 mm, fork length: 1,400 mm, empty load weight: 7,250 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,150 mm, Side loader Chassis number: 6323 Load centre: 700 Fork width: 150 mm Fork thickness: 60 mm Mast type: Duplex Transmission: REX ROTH A4VG71 Condition: Refurbished with warranty Technical condition: good Front tyre type: Pneumatic Front tyre size: 27x10-12 Front tyre condition: 40 - 60% Rear tyre type: Pneumatic Rear tyre size: 27x10-12 Bwjdpfx Aox Ekyfel Aou Rear tyre condition: 40 - 60%

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,867 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,350 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Bwjdpfx Alszgyv Ae Aou

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,472 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, drive type: Diesel, Side loader Bjdpfx Ajzwzcxel Ajwu ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Heater, fully enclosed cabin

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7783, Year of construction: 2010, operating hours: 13,980 h, load capacity: 6,000 kg, lifting height: 6,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, motor manufacturer: Perkins, gearing type: other, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 80 %, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), total height: 2,800 mm, total length: 4,800 mm, total width: 2,200 mm, color: red, Equipment: UVV, cabin, full service history, lighting, trailer coupling, We offer this ready-to-use Baumann DFQ 60/14/60 side loader; 6 tons; triplex mast, manufactured in 2010. Manufacturer: Baumann Model: DFQ 60/14/60 Year of manufacture: 2010 Condition: ready for use Bsdpfx Aszkr D Tjl Aswu Load capacity: 6 t Mast type: triplex mast If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Bwedpfxoy Eviro Al Aeu Minimum heat input: 40,000 Btu/hr

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Bwodpfxjm T Amuo Al Asu Very good condition

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Bwsdpfotmyifjx Al Aeu Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 7,970 h, lifting height: 7,200 mm, mast type: triplex, construction height: 3,250 mm, fork length: 1,400 mm, Sideload forklift Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Bwsdpfxoy Tzwws Al Aeu

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Bwedpfx Ajwhk E Hol Aou Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: used, Indramat TRK 6-4U-380/60-G0 TSS10/633 Bsdpsz Dbzlsfx Al Ajwu

Condition: used, Year of construction: 2013, fuel type: diesel, Mast: articulated arm Lifting capacity: 227 kg Bwodpozflnzsfx Al Aeu Please contact Gebrauchtgeräte Center for more information

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 14,458 h, load capacity: 5,000 kg, lifting height: 8,240 mm, free lift: 3,060 mm, fuel type: electric, mast type: triplex, construction height: 3,940 mm, fork carriage width: 1,500 mm, fork length: 1,490 mm, empty load weight: 11,694 kg, total length: 3,600 mm, drive type: Elektro, construction width: 2,300 mm, Four-way side loader Load center: 800 Fork width: 200 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Battery voltage: 80V Bwjdjz Evyfopfx Al Aju Battery Ah: 620Ah Battery year of manufacture: 2014 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease-purchase and financing at favorable conditions are always possible for us. We also gladly buy your used vehicles, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this EMS 50/14-15.3/87-82TR QSTH. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom manufacturing for forklifts from 8 tons upwards. We also gladly offer consignment sales for your vehicle. Platform height: 430 mm, forklift has height-adjustable cabin Full free lift

Condition: used, load capacity: 500 kg, total height: 200 mm, total width: 600 mm, total length: 800 mm, 20,000 roller dollies, 80 x 60 cm, 500 kg load capacity Used, good condition, see pictures Load capacity: 500 kg Own weight: 7.7 kg Length: 80 cm Width: 60 cm Height: 20 cm 2 fixed and 2 swivel casters Caster diameter 125mm Color: black Material: PP Dimensionally stable and robust Stackable Negotiable price: €12.00 net ex warehouse Selling price: €10.00 net ex warehouse for a minimum purchase of 100 units Selling price: €9.00 net ex warehouse for a full truckload (924 units) Also available: 1500 roller pallets 120 x 80 cm! (Link) Goods are in stock. Transport and assembly possible upon request. Inspection possible by appointment. Further information upon request. Bwedpotymgpefx Al Aju Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description: Are you looking to buy high-quality warehouse racking? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel structures immediately available • 30–50 semi-trailer trucks of merchandise turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance jobs, we offer a complete all-round package: 1. Lump sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full service is provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you came across us because of heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system - we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, tube diameter 50,8 mm wall strength 1,0 mm Bwsdpoupxlzsfx Al Aou square edge steel 50 x 50 x 1 mm round bar steel 25 x 6 mm weight of the machine ca. 46 Kg dimensions 0,6 x 0,4 x 0,5 m

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 5,273 h, load capacity: 4,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 2,850 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Standard Bwjdpfx Alou Acy Ds Asu Condition: Ready for use and fully functional Technical condition: good

Condition: ready for operation (used), Bosch VM 60-T / Supply module, serial number: 800297, professionally completely overhauled and tested with a 12-month warranty, 100% functional. Delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please enquire about the price separately. Bsdpfox Eq Atox Al Ajwu

Condition: used, functionality: fully functional, machine/vehicle number: 6862, Year of construction: 2006, operating hours: 11,697 h, load capacity: 4,000 kg, lifting height: 6,300 mm, free lift: 2,070 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, power: 62 kW (84.30 HP), fork length: 1,600 mm, empty load weight: 7,350 kg, total length: 4,100 mm, drive type: Diesel, construction width: 2,350 mm, Sideloader Chassis number: 6862 Load centre: 800 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Speed class: 20 Condition: Refurbished with warranty Technical condition: good Front tyres type: Pneumatic Front tyres size: 27x10-12 Front tyres condition: 40 - 60% Bsdpfex Ekzcex Al Ajwu Rear tyres type: Pneumatic Rear tyres size: 27x10-12 Rear tyres condition: 40 - 60% Fork positioner,