Used Cut Sets for sale (21,090)

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted Adjustable machine feet, designed for transport with a forklift. Fodpfx Aozgaazsl Sogh 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.

Condition: excellent (used), Bystronic BySprint 3015 2kW Fiber Laser With Byloader Sheet Loader And Shuttle Table. New 2011. Upgraded head and new fibre fitted in 2020 at a cost of £46k. Maintained by Bystronic. Fgodpfxez It U Se Al Ssh Fume extraction. Available with Nitrogen plant including Sauer Tornado Booster Compressor.

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: X 850 mm Y 520 mm Z 610 mm Tool interface: HSK 63 Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Machine weight: 6,800 kg Control system: Heidenhain TNC 640 Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle Fjdoy Ug Epopfx Al Sjgh BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, machine/vehicle number: W/S0202302027375, type of cooling: water, Equipment: documentation/manual, STAHLWERK CUT 160 P IGBT Plasma Cutter - powerful 160 amp, precise high-frequency (HF) pilot arc for first-class arc starting. The powerful STAHLWERK CUT 160 Pilot IGBT plasma cutter with 2T/4T mode and high-performance water cooling delivers a powerful 160 amps and features a precise high-frequency (HF) pilot arc for first-class arc starting. The cutting performance is up to 52 mm, depending on the material (structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm). In addition to common conductive metals, the plasma cutter is also suitable for coated sheets and surface rust. The cutting current can be adjusted steplessly from 20 to 160 amps. The compact unit features smart cooling and overheating protection and is easy to transport at only 38.3 kg. • Plasma / CUT - A plasma arc is generated by means of current, which melts the material, which is then removed with compressed air. This allows all conductive metals, such as standard steel, stainless steel, copper, aluminum, titanium, etc., to be cut precisely with ease. • Cutting thickness - Cutting up to 52 mm is possible, depending on the material. Structural steel P235 up to 52 mm, V2A or V4A up to 48 mm, aluminum up to 42 mm. • Pilot arc - High-frequency (HF) pilot arc for first-class arc starting. No contact with the workpiece is necessary! The pilot flame establishes the arc. This torch can be operated with a spacer, which is included. • Cutting current - Stepless adjustment from 20 to 160 A. • Airflow - After the cutting process is completed, air flows to cool the torch and reduce wear on the nozzle and electrode. • 2T/4T - determines the control of the operating mode and offers extended control over the current profile. In 2T mode, the high-frequency ignition (HF) remains active until the trigger on the torch is released. In 4T mode, the arc is ignited after the trigger is pressed and released once. After another press and release, the ignition is stopped. • Lightweight & compact design - With a weight of only 38.3 kg and dimensions of 630 x 320 x 600 mm, the unit is ideal for cutting work in any location. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more heavy lifting, thanks to the transport rollers under the unit! • Highest efficiency & performance - Three-phase alternating current (400 V) powers the unit and allows an output power of a true 160 amps. • Smart cooling & overheating protection - State-of-the-art technology, an integrated overheating protection and a high-performance cooling system enable the maximum performance to be achieved. • Water cooling - The high-performance water cooling guarantees optimal cooling of the entire hose pack at all times. The water cooler is already included in the scope of delivery! Product details Operation of the Stahlwerk plasma cutter Power connection 400 V | 20 A Compressed air as gas Required pressure no manufacturer's specification Air flow no manufacturer's specification Cutting Duty cycle at maximum 60 % Max. current for continuous cutting 32.6 A Cutting depth structural steel ST37 10 mm Cutting depth V2A and V4A stainless steel 7 mm Cutting depth aluminum 4 mm Cutting current 20 - 160 A Ignition Pilot arc Inverter IGBT Accessories Plasma torch Length 5 m Plasma nozzle Plasma electrode Ceramic cap Fjdpfjz Rivfox Al Sjgh Cutting nozzles, ceramic caps, protective clothing available as accessories.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200711, compressed air connection: 6 bar, type of input current: AC, Equipment: documentation/manual, Bührs (W+D) BB700 16K inserting system with Müller Apparatebau cut-sheet front end, built 2008. Currently in daily production at our site in Barnstaple, North Devon, UK. Viewing under power available by appointment. MACHINE DETAILS - Model: Bührs BB 700 16K, serial no. 200711, built 2008 - Speed: up to 16,000 mailpieces per hour (single page) - Total mailpieces: 25,932,497 (September 2026). Individual feeder counts available on request. - Feeders: 8 insert stations (7 x RF2 rotary, plus RF2K friction feeder on station 8) and envelope feeder - Envelope sizes: C4, C5 and DL - Integrity: Lake Image Systems camera reading system (v02.06.27) with 4 cameras fitted for full matching: one on the Müller front end, two on insert stations and one on the envelope station. Capacity for up to 8 cameras. Lake camera PC runs Windows XP; standalone operation recommended. - Software: W+D BSC 3.0 (03_03_24_00), Inserter 03_02_63_00, Bührs IBC controller 2.4.2.0 - Delivery conveyor included - Power: 400/230 V three-phase + N + PE, 50 Hz, 11.4 kVA total load, 25 A max fuse (BB700 plate rated 5 kW) - Compressed air: 6 bar filtered, 945 Nl/min MÜLLER FRONT END (model / serial) - Cut sheet feeder: 6687c / 54787 - Transport unit: 6995c / 57255 - Spacer: 6975c / 57230 - Accumulator C4: 6999c / 61322 - Accumulator C5: 6895c / 55307 - Folders: 6826c / 58116 and 6822c / 57630 - Exit transports: 6989c / 57997 and 6815c / 58037 CURRENT CONFIGURATION Fsdpfx Alsz Iy Tnj Segh The line has been modified from the original OEM layout (original June 2011 W+D drawing included in the pictures for reference only): - One RF2 feeder station added (original: 6 x RF2 + 1 x RF2K) - Müller front end reconfigured with folders and a C5 accumulator added - Turnover belt section, MT100 mailtable, distance module and eject gate removed. Output leg now approx. 3.5 m (originally 7.5 m). - Power and air figures are taken from the original drawing, which included the removed modules, so actual demand is likely to be lower. Please confirm as-installed dimensions on site before planning installation or transport. SERVICE AND MAINTENANCE - Annual service by BW Converting, most recently August 2026, including a rebuild of the crossover section - Accumulator EPROM upgrade fitted January 2026 - Maintained in-house by our own engineering team, with daily safety checks and weekly, monthly and quarterly PMs against documented checklists - Full CMMS maintenance history available from August 2024 - All manuals available, in physical and digital copies REMOVAL Collection only. The buyer is responsible for decommissioning, removal and transport. We do not arrange decommissioning or delivery.

Condition: new, welding current 15 - 40 A cutting capacity 1 - 16 mm open-circuit voltage 96 V Required air-pressure min. 4 bar connected load 3,6 kW connected load frequency 230 V weight 9,0 kg Dimensions (LxWxH) 371 x 153 x 232 mm Exhibition machine !! Inverter plasma cutter with accessories: Cutting torch with 4 m cable, earthing clamp with 2.5 m cable, air pressure gauge, Mask and brush. Fgedpoupxfhefx Al Sjh

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1450 kg traversing speed 200 m/min weight 5010 kg dimensions of the machine ca. 9450 x 2240 x 2520 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Intelligent adjustment to overheating Fgedpjwmwwmjfx Al Seh 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust removal function 22. Safety light curtains 23. Extraction 24. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, Year of construction: 2011, x-travel 1100 mm y-travel 610 mm z-travel 610 mm Fgedpfx Alsyk Ifhj Sjh control Heidenhain 530 weight of the machine ca. 7800 kg

Condition: new, Year of construction: 2023, welding current 30 - 100 A cutting capacity max. 50mm mm open-circuit voltage 170 V Required air-pressure min. 4 bar connected load frequency 400 V weight 0,75 kg Dimensions (LxWxH) 1,2 x 0,7 x 1,0 mm Fodpfjw En Erex Al Ssgh Plasma cutting machine with cart - 105 RTX torch - Includes 7m hose package - Spare nozzles - Like new, ready for immediate use

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Fgsdpfxjyzhl De Al Seh

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Fodpfxjz Ar Ags Al Sjgh Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Fgjdpfxoz A D Rye Al Ssh Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, The cutting tool can be used with 4 different attachments, with 2 currently in use. Manufactured in Germany. Fgedpszmyyzjfx Al Ssh

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Fedpezz Shysfx Al Segh Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: new, welding current 20 - 60 A cutting capacity 1 - 20 mm open-circuit voltage 104 V Required air-pressure min. 4 bar connected load 7,9 kW connected load frequency 400 V Fsdpfxsupxuvj Al Segh weight 16 kg Dimensions (LxWxH) 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology "Delivered without CEE plug".

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1095 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelligent maintenance reminder 19. WIFI internet connection 20. water cooler 21. extraction system 22. wear parts set CUTTING CAPACITY: CARBON STEEL (mm) 35 STAINLESS STEEL (mm) 35 ALUMINIUM (mm) 25 Fgjdpfjx I Sglox Al Ssh OPTIONAL: LANTEK EXPERT II CUT Sotware incl. postprocessor

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 911 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting machine with automatic shuttle table Configuration 1. Bodor Power 3kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Mortise-and-tenon type plate welded segmented bed 5. Stretched aluminum gantry 6. Bodor servo motor and driver 7. Bodor rack and pinion Fgsdpfxjwnt Eij Al Soh 8. One-click processing 9. Bodor Lightning perforation technology 10. Expert database for high-speed cutting 11. Automatic cutting gas pressure adjustment 12. Open door protection 13. Cutting malfunction alarm function 14. Ergonomic remote control (Bodor Mango®) 15. Active anti-collision function 16. Intelligent anti-shake 17. Gas-saving continuous flow nozzle 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooler 21. Extraction system 22. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 14 mm STAINLESS STEEL 10 mm ALUMINUM 6 mm OPTIONAL: LANTEK EXPERT II CUT software incl. postprocessor Translated with (free version)

Condition: new, Year of construction: 2026, table length 4000 mm table width 2000 mm burner heads 1 Control CNC workpiece weight 2510 kg traversing speed 200 m/min dimensions of the machine ca. 11599 x 3380 x 2718 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Intelligent adjustment to overheating 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust removal function 22. Safety light curtains 23. Extraction 24. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm Fjdpfx Alswh Ukyj Sogh ALUMINUM 20 mm

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Drive power: 15 kW EQUIPMENT Control system Fodpfxez Ngbvo Al Sjgh Suitable for secondary shredding The seller has a suitable conveyor belt in stock as an optional extra.

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) Fgedpfx Aozqnxtol Sjh - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting Fgedpez Arhvefx Al Soh -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 -inch thread: 1 1/2 - 3" -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Fgjdez Izu Tspfx Al Soh Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Fgsdpfjz D D N Ejx Al Ssh Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, J. Neu Piccolo EP 150 oscillating panel saw, manufactured in 2021, in like-new condition. The original saw blade is still installed, and the saw has been used for a maximum of 20 hours. Therefore, it is in very good condition! Equipped with infeed and outfeed roller conveyors: 600 cm each. Power: 3.7 kW Fgodpfez It Ewsx Al Ssh Saw blade: max. 500 mm (30 mm bore) Cutting height: 150 mm Optionally, a matching dust extraction unit from Holzkraft RLA 140 (manufactured in 2023) can also be purchased (see last picture). The machine can, of course, be inspected while powered on and thoroughly tested. The sale is to business customers only and excludes any warranty for defects. No guarantee, warranty, or right of return.

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles Fgjdpfx Ajz Hcr Dol Ssh - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.