Used Dörries Sde 125 for sale (3,538)

Condition: new, diameter / mm Psdpfxjy S Drnj Apvept Cutting (quantity) / 0 weight / kg Standard cylinder Make: FESTO Type: DSBG-125-935-KE-P-CS Material no.: 2801899 F108 p max: 10 bar

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137. Podpfxjlkchre Apvept

Condition: used, functionality: fully functional, machine/vehicle number: 8701, Year of construction: 1999, operating hours: 2,117 h, load capacity: 1,250 kg, lifting height: 4,360 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, fork length: 1,250 mm, drive type: Elektro, High-lift order picker Chassis number: 8701 Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Pjdpfx Aoy Upl Sepvspt Battery voltage: 48V Battery type: PzS

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Pedpfxowrxqxj Apvspt Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Height: 2200mm Weight: 60000kg

Condition: good (used), Year of construction: 2004, overall weight: 6,000 kg, total height: 245 mm, total length: 5,990 mm, total width: 1,250 mm, Floorplate Length: 6000mm Floorplate Width: 1250mm Height: 245mm No. Of T-slots: 5 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Length: 5990mm Width: 1250mm Height: 245mm Weight: 6000kg Ppsdpjxdltuefx Apvst Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, year of last overhaul: 2026, tank capacity: 240 l, input frequency: 50 Hz, type of input current: three-phase, electrical fuse: 32 A, Kemper ST 125 A Spiral Mixer Dough machine with 2 timers for min/max. 15 - 200 kg of dough Mixer with 2 mixing bowls Stationary machine Connection 400V, 32A-CEE plug Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Truck delivery Additional mixing bowls Maintenance contract Service package Kemper base plate Floor mounting Instruction and commissioning Pedpfxow S Snpo Apvopt Come and see our wide selection of bakery machines!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, year of last overhaul: 2026, total length: 1,320 mm, total width: 940 mm, total height: 1,370 mm, input frequency: 50 Hz, type of input current: three-phase, power: 9 kW (12.24 HP), electrical fuse: 32 A, Kemper SPL 125 spiral mixer Dough machine with stainless steel bowl 2 speeds, 2 timer clocks Machine is mobile Connection: 400V, 32A-CEE plug Dimensions: 940 x 1320 x 1370/1850 mm (W x D x H) Only available from us, DGUV V3 certified Used machine, refurbished & SAB inspected With warranty + spare parts service Optional: Maintenance contract Ppsdpox Htu Ijfx Apvjt Spare parts box Delivery service Instruction & commissioning We have a large selection of spiral mixers!

Condition: used, spindle diameter 125 mm spindle travel 1130 mm Ppedpsyuqc Refx Apvet column travel 6000 mm headstock travel cross 1700 mm column travel on cross-slide 400 mm spindle speeds 2,24 - 450 (27x) U/min volt 380 V total power requirement 14 kW Facing head D.R.O.

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm Ppodpfx Asyuql Espvot headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. total power requirement 25 kW

Condition: used, spindle diameter 125 mm x-travel 8000 mm y-travel 3000 mm Ppjdpfx Asyuqkujpvjt spindle bore 240 mm w-axis 1650 mm total power requirement . kW

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,400 mm, number of axes: 4, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 4-axis IMA BIMA/300/125/530 CNC processing center was manufactured in 2012. It features an extensive working range with an X-direction of 5300 mm and Y-direction of 1400 mm. The machine includes a powerful main spindle with a speed range of 0-24,000 rpm and a tool holder of HSK F63. If you are looking to get high-quality CNC machining capabilities, consider the IMA BIMA/300/125/530 machine we have for sale. Contact us for further details. Working range • Y (main spindle + tool Ø20 mm): 1400 mm • Y (drilling unit, all vertical drills): 890 mm • Single-station machining: X = 2 × 2550 mm; center clearance X = 200 mm • Indexing table machining: X = 2 × 2250 mm; free space in center = 800 mmTool magazine • Automatic tool/adapter changer, turret type, 18 slots • Mounted on support, moves in X-directionGuiding and lubrication • Preloaded, surface-hardened precision roller guides on all axes • Manual central lubrication for main-axis linear guides and Z-axis ballscrewVacuum/fixturing and table • 1 vacuum pump, 90 m³/h • Console table with 2 fixed right and 2 fixed left workpiece stops (X-direction) for Y movement • 10 support arms, infinitely adjustable in X, each with rear stop Pjdpfx Apsy Tw Ilsvjpt • All stops program-controlled • Suction plates with patented 2-circuit clamping system (hose-free) • 8 smooth support rails, automatically lowerable • 2 mushroom buttons for clamp/releaseSpindle and machining units • Main spindle: 10.0 kW (S6), 7.5 kW (S1); HSK F63 (Ø38 mm, per DIN 69893); 0–24,000 rpm, programmable • Centrally integrated CNC axis: 360° rotation for adapter units, torque support on main spindle, pneumatic interface • Drilling/grooving: Vertical drilling unit l14 with 6 horizontal spindles; horizontal units each with 2 outlets • Attached groove saw unit, swivel 0°/90°Control and software • ICOS CNC control: PC-based, Windows UI, path control of all servo axes, job list/order processing, IMA backup & recovery on two hard drives, UPS • IMAWOP software: Dialog programming, 3D view and basic simulation of workpiece, suction cups, brackets, tools, and adapters Additional equipment • Additional 2nd vacuum pump, 90 m³/h • Additional center stop row for centering workpieces • Chip conveyor belt

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Ppjdoy R S Eaopfx Apvot Stepless speed adjustment via handwheel Right and left rotation Hydraulic delivery via foot switch Weight: approx. 550 kg Additional tool on request

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder Ppodpfx Apsu Idw Isvot - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. * Psdpfsu Idwbex Apvjpt

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm Pedpfx Aou Nfibspvjpt height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: used, Year of construction: 2018, Technical details: lifting capacity: 0,125 t swival range : 180 ° Arm length: 4000 mm arm length:: Säule - Kranhaken: 3850 mm height lower edge cantilever arm: 3000 mm column diameter: Ø 220 mm rotation: 270 ° Dimensions of the crane assembled: LxWxH: 4800 x 1300 x 3250 mm Ppjdpsu Utmpefx Apvjt Dimensions of filling container: LxWxH: 1100 x 1000 x 740 mm Column height: 3200 mm Heavy-duty operation = manual with swivel stop Hoist: Hans Hebetechnik load capacity 1000kg; lifting height approx. 2400mm; hook Ø 30mm with rope safety device; travel distance hoist 2700mm; control via pendant control The crane can be moved via the filling container. *

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed Pjdju Idvkopfx Apvspt i.D. *

Condition: used, Technical details: number of spindles: 9 Stück weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible Pjdpsu Idwnefx Apvopt i.D. *

Year of construction: 1979, condition: used, Technical details: Flow rate: 400 m³/h negative pressure : 1250 pa motor: Typ B5-71 mit 2850 U/min connection electric: 380 V total power requirement: 0,37 kW weight of the machine approx.: 35 / 28 kg dimension machine xH: Ø 0,5 x 1,3 m Trockenabscheider mit Ventilator, beide Geräte stehen als Ersatzteilspender zum Verkauf! Psdpfxou Nwwqj Apvspt Nr. 1 = 400 m³/h BJ 1979 (Zustand: Motor i.O., Saugprozess außer Funktion) Nr. 3 = 400 m³/h BJ 1979 (Zustand: unvollständig!) Dry separator with fan Nr. 1 + Nr. 2 (Nr. 1 = 400 m³/h + Nr. 3) Suction nozzle Ø 40 x 50mm Operating temperature 50°. Filter space = approx. Ø 400 x 500m i.D. *

Condition: new, Year of construction: 2025, power: 125 kW (169.95 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 3.701 kg Functional Generator capacity: 125 kVA Dimensions of cargo space: 225 x 135 x 225 cm Ppodjw A E U Sspfx Apvot CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), motor manufacturer: Cummins, General information Field of application: Construction Weights Empty weight: 4.000 kg Functional Generator capacity: 125 kVA Dimensions of cargo space: 290 x 130 x 160 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 300 l Ppedpfjw Dx T Rjx Apvst Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Psdpfx Aehmmfkepvspt Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Year of construction: 1991, Press brake Manufacturer: AMADA PROMECAM Type: HFB 125/40 Year of manufacture: 1991 Control: DELEM DA 58 Maximum pressing force: 1,250 kg Maximum stroke: 180 mm Sheet thickness: 8 mm Working width/Throat: 3.7 m Number of phases: 3 Power consumption: 11 kW Voltage/Frequency: 380/50 Pjdpfx Apex Tzl Iovspt Rated current: 24 Weight: 9,900 kg ä19526 Availability: immediate

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Entry-level model panel bender bending center For detailed information and a personalized quote, please send us your inquiry. We will process it as quickly as possible and get in touch with you. Pedpfxsy H Huhj Apvjpt

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AP00103831, total height: 660 mm, total width: 560 mm, total length: 480 mm, type of input current: AC, overall weight: 50 kg, power: 0.6 kW (0.82 HP), Specification - PS 125 OneStep Weight: 50 kg Podsy U D Twspfx Apvspt Electrical: Switchable 110/220 VAC, 50/60 Hz 5.0/2.0 Amps Width: 56 cm Height: 66 cm Depth: 48 cm Throat depth: Up to 86 mm Film thickness: 35-100 µm Bag size: W 55-260 mm, L 102-430 mm Material stock: - 2 pallets of film (250x400x50my) - a few boxes of film (125x175x50my) - a few boxes of thermal transfer film