Used Dmg Dmu60 P for sale (41,215)

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm Ksdpfxjvwgp Uo Ag Uodt y-travel 560 mm z-travel 560 mm Control MillPlus HEIDENHAIN table dimension - longitudinal 1000 mm table dimension - cross 600 mm spindle turning speed range 12000 U/min Number of axles 4 St. rapid traverse 30 m/min tool change unit 24 -fach weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Condition: ready for operation (used), DMG Suppl. 110498 Flat control panel, TFT 15". 2386389, SN: 504822207, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Kdedpfxsi I Iz Ae Ag Uet

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,672 h, functionality: fully functional, machine/vehicle number: 0040000281C, turning length: 500 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,300 kg, controller model: Heidenhain Plus IT DinPlus/TurnPlus V7, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Turning length: 500 mm Kdjdpfx Ajztb Adjg Ust Y-axis stroke for cross slide: ±40 mm Spindle type: Integrated spindle motor ISM 52 Plus Drive power: 20/27 kW at 100/40% duty cycle Spindle speed: 6,000 rpm Turret: 12-station disc turret Sauter Tool holder: VDI 30, DIN 69880-30 Tool drive: Connection/drive according to DIN 5480 MACHINE DETAILS Control: Heidenhain Plus IT DinPlus/TurnPlus V7 Clamping system: Hydraulic sub-collet chuck Draw tube inner diameter: 52 mm Measuring system: Direct measuring system Glass scale: X-axis Connection power: 25 kVA Rated current: max. 40 A Fuse: 44 A Mains voltage: 400 V Mains frequency: 50/60 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,300 kg Operating hours (according to counter) Spindle hours: 7,672 h 2nd counter: 22,936 h EQUIPMENT C-axis Hydraulic spindle brake Tailstock Chip conveyor with coolant system Connection nozzle for oil mist separator including electrical connection Coolant spray gun Separate speed limiting device for the main spindle for power chucks with reference speeds below the maximum machine speed Documentation Tool case for disc turret Ø 30

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Kjdjzr Rugspfx Ag Uodt

Condition: like new (used), Year of construction: 2022, operating hours: 3,955 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 13 kVA, torque: 83 Nm, controller manufacturer: SIMENS 828D OP, workpiece weight (max.): 600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,955 h, number of spindles: 1, number of slots in tool magazine: 24, We are selling a very well preserved DMG MORI M1 CNC milling center, year 2022, with only 3111 hours of operation. The machine is in excellent condition and can be tested before purchase. Technical details: X-Travel 550 mm Y-Travel 550 mm Z-Travel 510 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min Feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid Motion -Longitudinal/Cross/Vertical 30 m/min No. of tools in magazine 20 Workpiece diameter at full load 80 mm Workpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg Table load 600 kg spindle drive 9 / 11 kW control SIEMENS 828D total power requirement 30 kVA Additional information cnc SIEMENS 828 D Chip conveyer Cooling throug the spindle 20bar Kjdpswl N Tqofx Ag Usdt RENISHOW Measuring probe Tool taster

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Ksdpjzz I Dkefx Ag Uodt Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Year of construction: 2005, condition: good (used), Pallet with 18H7 T-slots compatible with the DMG DMC 100 H and DMG DMC 100 U, as well as the DMC 125H/U Duoblock >10 pallets available Kedjzkbt Dspfx Ag Ujdt

Condition: used, Year of construction: 2007, B-axis swival range +/- -90° / +12 ° C-axis 360 ° control HEIDENHAIN - Millplus number of spindle speeds 12.000 U/min numbers of positions in the tool changer 60 tool taper SK40 NC rotary table diameter 600 mm fixed clamping table 1.000 x 600 mm max. table load 500 kg 5-axis simultaneous machining center | DMG - DMU 60 monoBlock equipped with ITC (40bar), a 60-way tool changer, NC - rotary table, Renishaw measuring probe and chip conveyor. Additional equipment information: - NC swivelling head B-axis - NC rotary table C-axis integrated in the fixed table - Direct position measuring system in X/Y/Z (glass scales) - Extraction system Kdedpfx Aey A Tbysg Uot - 3D Quickset - Handwheel HR 410 The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU60monoBlock | DMU60 monoBlock | DMU60 | 60 monoBlock

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h Kjdjxgnz Topfx Ag Usdt The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9088000069A, travel distance X-axis: 1,100 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,700 kg, overall weight: 6,950 kg, For sale is a DMG MORI M2 Pro machining center, manufactured in 2023, in good condition. The machine was in operation for approximately 2.5 years, is fully functional, and can be inspected by appointment. The sale is due to a restructuring of our machine park. Kdjdpfezh U Ngex Ag Ust Technical data: Manufacturer: DMG MORI Model: M2 Pro Year of manufacture: 2023 Control system: Siemens SINUMERIK ONE Spindle speed: 12,000 rpm Travel distances (X/Y/Z): 1,100 / 550 / 510 mm Table size: 1,400 × 600 mm Maximum table load: 1,700 kg Machine weight: approx. 6,950 kg Condition: Good condition Fully functional Inspection possible by arrangement We will gladly provide the current operating hours upon request. If you are interested or have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm Kjdpfew S Efzex Ag Ujdt revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Kjdpfsv T Rtisx Ag Uodt Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Kedpjyz S T Sofx Ag Uodt

Condition: ready for operation (used), Year of construction: 2009, operating hours: 16,616 h, travel distance X-axis: 120 mm, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details. • Manufacturer: SAUER GmbH Ultrasonic • Component: Main Drive, 40,000 rpm • Operational mode: S1 • Speed 1: 36,000 rpm • Speed 2: 42,000 rpm • Output performance 1: 6 kW • Output performance 2: 6 kW • Torque 1: 1.7 Nm • Torque 2: 1.3 Nm • Voltage 1: 400 V • Voltage 2: 420 V Kdsdpfxjy Hhwks Ag Ust • Current 1: 10 A • Current 2: 9 A • Frequency 1: 1,200 Hz • Frequency 2: 1,400 Hz • Connection: Star • Protection type: IP54 • Vibration quality: < 1 mm/s • Cooling: Water • Rotor moment of inertia: 0.000252 kg·m² • Insulation class: F • Connection diagram: 635 • Max. ambient temperature: 40 °C • Thermal protection: KTY 84-130 and PTC

Condition: ready for operation (used), Year of construction: 2003, operating hours: 20,317 h, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, total width: 1,630 mm, total height: 1,920 mm, overall weight: 4,350 kg, controller manufacturer: FANUC, controller model: Series 160i-8, product length (max.): 4,900 mm, number of axes: 8, This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details. • Turning length: 120 mm • Turning diameter: 32 mm • Axis travels: • X1: 65 mm • Y1: 350 mm • Z1: 120 mm Kodpfx Agoy E Nq Ao Usdt • X2: 265 mm • Y2: 235 mm • Z2: 320 mm • C1: 360° • C2: 360° • Spindle bore: 42 mm • Total power requirement: 34 kVA • Condition: Very good; connected and ready for testing Additional equipment • Set of accessories and tool holders included Technical Specification Counter Spindle No

Condition: ready for operation (used), Year of construction: 2012, operating hours: 23,197 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 7, This 7-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details. • number of cross slides 3 • main spindle yes • sub spindle yes • max turning diameter 50 mm • max turning length 550 mm • main spindle speed max 5000 rpm • sub spindle speed max 5000 rpm • main spindle power 11 kW • sub spindle power 11 kW • driven tool speed max 6000 rpm • turret speed 401 rpm • X1/X2 axis travel 160 mm • Z1/Z2 axis travel 550 mm • Y axis travel ±40 mm Kedsy Ey U Eepfx Ag Uodt • rapid traverse speed 30 m/min • electrical connection 34 kVA • max current 135 A • tailstock force 300 daN • tailstock stroke 510 mm • tailstock connection MK3 • coolant tank capacity 980 l • coolant filter 50 µm • coolant pump pressure 20 bar • collet size 52 • max hex 43 mm • max square 35 mm • 3-jaw chuck type BBD 140/39 • optional accessories tool holders driven tools collets • spindle hours 23198 h • Optional: bar loader • loading area 500 x 630 x 1250 mm • max load 350 kg • max bar weight 40 kg • material diameter range 6 to 70 mm • square min edge 6 mm • hex range 5 to 60 mm • bar length 500 to 1200 mm • spindle liner max length 2000 mm Additional equipment • Tool holders • Driven tools • Collets Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), DMG Microset ECO 210: a professional tool setting and measuring device for cutting tools. This machine is used for the precise measurement of length, diameter, and geometry of tools before they are installed in a CNC machine tool, which significantly reduces setup time and increases machining accuracy. The device is complete and equipped with a control computer, monitor, keyboard, mouse, and a set of measuring adapters as shown in the pictures. Technical data: Kdedpszgcdiefx Ag Uet * Manufacturer: DMG Microset GmbH * Model: ECO 210 * Year of manufacture: 2008 * Power supply: 230 V * Maximum power consumption: 650 VA * Country of manufacture: Germany Equipment: * Control computer * LCD monitor * Keyboard and mouse * Tool and accessory cabinet * SK50 / HSK63A adapter * SK50 / SK40 adapter * HSK40 ring * DMG Microset calibration standard * Microvision III documentation (as shown in the pictures) Technical condition: * Used * Functional * Last service performed by HAIMER (service sticker visible on the device) * Good visual condition, normal signs of use Applications: * CNC machining centers * CNC milling machines * Tool rooms * Maintenance departments * Manufacturing plants and precision metalworking The sale includes exactly what is shown in the pictures. The device can be inspected before purchase, by prior arrangement.

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Kedpfx Agjza Apao Uodt Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Control system Siemens Sinumerik ONE, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, Tool changer with 24 positions, Linear axes X/Y/Z 24 m/min Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor Renishaw probing system kit Coolant spray gun Enclosure roof Kdjdpfx Ageza Alus Ujt Internal high-pressure cooling 20 bar, Bed flushing via M-function Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator, Ø 150 mm, 4th axis package, -Rotary table Lehmann, type: EA-510.L NE with indirect measuring system, Electrical and pneumatic preparation Software preparation for Rotary table machining lRACYL software for surface machining Tilting cycle (Cycle 800) Holding torque spindle clamping: 800 Nm Max. speed: 65 rpm, Center height 150 mm, Rotary table positioned along the X-axis on the right side of the work table, Manual chuck (three-jaw), diameter 160 mm, Tailstock, manual, for NC rotary table, stroke: 40 mm, center height 150 mm, Tropical package, Active cooling unit for control cabinet, Compressed air, external and internal (through spindle center), can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 1800 spindle hours.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center Kdsdpfx Agoy D Hvao Uot • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: good (used), We offer you: 6 pallets for DMC 80 U Kedpeyvqfvsfx Ag Usdt Price per pallet Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information. Subject to change and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine. • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel Kedpfxjx D Iirs Ag Usdt • BA4 mode Additional equipment • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2017, Main spindle changed 2025. Kodpjy S U Tcjfx Ag Uodt Technical details shown on photo. Parts shown by hand not come.

Condition: like new (used), Year of construction: 2019, operating hours: 31,241 h, functionality: fully functional, See AB in the attachment Kodpoxqm Tvofx Ag Uodt

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT Kedoza Alhjpfx Ag Uodt IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle