Used Ecoca Mt-208Mc 750 for sale (6,134)

Condition: used, Year of construction: 2012, travel -x axis 1.630 mm travel -y axis 762 mm travel -z axis 650 mm control FANUC - 0I-MD Spindle speed 12.000 min -1 weight of the machine ca. 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. Nwsdpfx Aszw N E Iebusn The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750

Condition: new, functionality: fully functional, machine/vehicle number: 10000475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Low-bed trailer 125x250cm, 750kg, "Type U4" Passenger car trailer Type U4 with loading dimensions of 125 x 250 x 45cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Special features: Double-walled, anodized aluminum side wall 30mm (unique) Side wall with cargo securing system in V2A stainless steel (unique) Very stable rear door latches made of V2A stainless steel (unique) Side wall fastening completely with 8 mm V2A stainless steel (unique) Three-sided lashing rail / railing (unique) 2x M16 threaded tension anchors / stable threaded rods at the rear (unique) Additional equipment: Support wheel Rear door easily removable Stable screen-printed floor, non-slip birch wood, waterproof glued Nedji R Hw Aopfx Abujwn Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185 / 70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards screwed with 8 mm stainless steel screws 12 Volt electrical system, 13-pole connector with reversing light Other Vehicle registration document / registration certificate part 2 Various accessories available at an extra charge! If you would like to purchase this trailer or have further questions, please use our internal box trailer "No. 10000475".

Condition: like new (used), Year of construction: 2019, functionality: fully functional, pressure (max.): 16 bar, Adsorption dryer Parker Zander K-MT 35-95/D3 Generation 3 Manufacturer: Parker Hannifin Manufacturing S.r.l. / Parker Zander Model: K-MT 35 Design: K-MT 35-95/D3 Generation 3 Serial number: 399893960001 Year of manufacture: 2019 Nodpsz Dlafsfx Abujwn Voltage: 230 V Frequency: 50–60 Hz Protection class: IP65 Max. operating pressure: 16 bar Min. operating temperature: 1 °C Max. operating temperature: 50 °C Condition: new / unused Machine type: Adsorption dryer for compressed air

Condition: used, Year of construction: 2007, machine/vehicle number: TP126, Used ENOLMECCANICA VALLEBELBO capping machine - Year 2007Technical Specifications & Performance DataThis single-head capping machine is engineered for precise insertion of T stoppers on glass bottles. Manufactured by Enolmeccanica Vallebelbo, the MT/T model combines compact design with reliable mechanics, making it a strong choice for second hand bottling equipment in beverage production and industrial packaging environments. Its construction and format components are tailored for T-stopper applications where consistent torque and seating depth are critical to product quality.Manufacturer: Enolmeccanica VallebelboModel: MT/TYear: 2007Machine type: Single-head Capping MachineNumber of heads: 1Cap type: T stopperCap format: Diameter 67 mmContainer compatibility: Glass bottlesConstruction: Industrial-grade frame with guarded operating areaCompliance: CE markingAdvanced Automation & Control SystemsThe MT/T capping station is designed for stable and repeatable operations. Mechanical alignment and robust head guidance help maintain consistent insertion depth for T stoppers. A straightforward operator interface and accessible mechanical adjustments support fast setup and reliable changeovers of format parts. Integrated safety interlocks and emergency stop provide secure operation in busy packaging areas. Electrical controls are designed for dependable performance within modern bottling lines.Production Line Integration CapabilitiesThis capping machine integrates seamlessly into a used bottling line or can operate as a standalone workstation. In-line, it pairs effectively with rinsers, fillers, and downstream labeling and inspection systems. The infeed and outfeed can be connected to standard conveyor systems for smooth product transfer. Its single-head configuration suits short runs, format trials, and specialty products while maintaining professional capping quality in industrial packaging workflows.Machine Condition & Maintenance HistoryThe unit is presented in ready-for-operation condition, appropriate for immediate inclusion in beverage production. As a second hand asset, it offers an efficient path to upgrade or expand capping capability without the lead times associated with new machinery. Preventive maintenance is supported by accessible components and a serviceable design.Operational Performance & VersatilityThe MT/T delivers controlled insertion of T stoppers, ensuring secure seating and consistent appearance across batches. The single-head layout prioritizes precision and gentle handling, ideal for high-value products bottled in glass. Its format at 67 mm diameter is suitable for applications requiring larger T stoppers, and with the appropriate change parts, the platform can support additional formats to meet evolving product needs.Installation Requirements & Site PreparationThe compact footprint simplifies layout within existing bottling and beverage production lines. Standard utility connections and straightforward anchoring allow efficient commissioning. The ... Nwodpfx As Adt Azobuen

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. Nodpfx Aozbk Iyjbuown -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 180 mm, travel distance Z-axis: 750 mm, controller manufacturer: SIEMENS, number of axes: 2, Horizontal turning machine manufactured in 2013. This Weiler C30X 750 features a Siemens control system, ensuring reliable operation and precision. If you are looking to get high-quality turning capabilities, consider the Weiler C30X 750 machine we have for sale. Contact us for further details. - Control: Siemens Nwsdpfx Aez Hlcfebuen Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2019, chuck diameter 500 mm swing diameter over bed slide 700 mm control SIEMENS travel -x axis 630 mm travel -z axis 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. Nwedpfxox Szlro Abuon - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT

Condition: good (used), mileage: 359,808 km, power: 552 kW (750.51 HP), first registration: 06/2017, fuel type: diesel, tire size: 385/65 R22,5, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 6,800 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - FCW (Forward Collision Warning) - Remote central locking Nsdpfe Afdc Isx Abuswn - Speed limiter - Hydraulics - LDWS (Lane Departure Warning System) - Lift axle - Particle filter - PTO (Power Take-Off) - Radio - Rotating lights - Sleeper cab - Side fender - Sun visor - VEB = Further Information = General Information Model year: 2026 License plate: 93-BJK-6 Technical Information Number of cylinders: 6 Engine displacement: 16,123 cc Axle Configuration Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 8000 kg; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: Parabolic suspension Rear axle 1: Tire size: 385/55 R22.5; Lift axle; Max. axle load: 7500 kg; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R22.5; Double tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inner: 55%; Tire tread left outer: 55%; Tire tread right inner: 55%; Tire tread right outer: 55%; Suspension: Air suspension Weights Unladen weight: 9,210 kg Payload: 17,790 kg GVW (Gross Vehicle Weight): 27,000 kg Interior Interior: gray, leather Number of seats: 2 Maintenance, History, and Condition Number of owners: 1 APK (Technical Inspection): valid until 04/2027 Technical condition: good Optical condition: good Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 34, spindle bore: 86 mm, overall weight: 16,000 kg, Turning and Milling Center acquired through business takeover Manufacturer: Mori Seiki / Model: MT 250S / 1500 / Year of Construction: 2000 / Refurbishment cost: 200,000 Euros Condition: good, Control: CNC Mori Seiki MSC 501 Technical Data: See attached PDF Max. turning diameter: 570 mm Turning length: 1530 mm Max. swivel diameter: 800 mm Swivel diameter over cross slide: 420 - 860 mm Distance between centers: 1,828 mm Main spindle: Nodpfx Abezxg Sujujwn Speed range: 35 - 3500 min-1 Main spindle power: 18.5 kW / 15 kW Number of curve speeds: 2 Spindle nose: JIS A2-8 Max. bar capacity: 73 mm Spindle bore: 86 mm Spindle bearing diameter: 130 mm C-axis: 0.001° Tailstock: Tailstock spindle speeds: 50 - 3500 min-1 Tailstock power: 11 / 7.5 kW Number of curve speeds: 2 Spindle nose: JIS A2 - 6 Max. bar capacity: 60 mm Spindle bore: 73 mm Spindle bearing diameter: 110 mm C-axis: 0.001° Milling spindle: Spindle speeds: 8000 min-1 Power: 7.5 kW / 5.5 kW Tool taper: KM 63 Spindle bearing diameter: 80 mm B-axis: 120° / 105° Resolution: B 0.001° Number of tools: 42 Tool taper: KM 63 Max. tool diameter: 80 / 125 mm Max. tool length: 400 mm Max. tool weight: 8 kg Tool change time: 1.6 sec. X-axis: 635 mm / Y-axis: + / - 110 mm / Z-axis: 1595 mm / B-axis: 120° / 105° + Chuck: Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min Max. feed rate: 30,000 mm/min / Total power: 72.3 kW / Weight: 22 tons / Dimensions: 7.0 x 3.5 x 3.5 m, Steady rest: 30 Tailstock: Not required 31 Tool magazine capacity: 42 32 Chip conveyor: Available 33 Chip conveyor type: Slatted belt 34 Chip container: Available 35 Cooling system: Standard (635 W / 1040 W) 36 Coolant supply through the tool spindle: Available 37 Compressed air cleaning of chuck (spindle 1): Available 38 Compressed air cleaning of chuck (spindle 2): Available 39 Tool presetter (in the machine, spindle 1): Automatic 40 Bar loader: Interface only 41 Measuring system X-axis: Heidenhain 42 Signal light: 3-stage signal tower (red, milky white, green) 43 Foot switch for chuck: Double foot switch 44 Steady rest: Automatically centering steady rest (programmable) 45 Type of automatically centering steady rest: SLU3 (SMW) 46 Steady rest unit (SMW): Available 47 Automatic door: Available 48 Hydraulic fluid (fluorocarbon): Not compatible 49 Number of total counters: 1 50 Number of workpiece counters: 1 51 Automatic shutdown: Available 52 Language of NC screen: Spanish 53 Language of PC screen: Spanish 54 Language of warning screen: Spanish 55 Memory capacity for part program (m): 1160 m 56 Number of stored programs: 125 57 Number of tool correction pairs: 240 58 Optional sentence masking: Softkey version 59 Programmable data input: Available 60 Number of shared variables for user macros: 600 61 Tool life monitoring: B 62 Number of tool life monitoring (MORI): MAX. 128 PAIRS * 4 63 LOAD MONITORING: B

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull Nwsdpfxjyc Ewxe Abuen The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: new, Year of construction: 2020, Cantilever racking – NEW Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Center distance: 131 cm - NEW – immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized finish. - Cantilever arms in hot-dip galvanized finish. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Racking consists of: - 04 x uprights, incl. base approx. 416 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE 100 - incl. all necessary connecting elements and screws. Nwode Afgh Tepfx Abuen Why BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities of the racking uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are delivered in a hot-dip galvanized finish. This means they can be installed both indoors and outdoors and will not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets according to DIN EN 15048-1. - Long reorder guarantee - Upright base and upright back are welded together, providing additional safety and shorter assembly times, as the feet do not need to be screwed to the upright back. - Connections made of angle steel, eliminating the need for adjustment with tensioning bolts. This shortens assembly time. - No elongated hole system, thus no weakening of the upright profile. Price: €2,653.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Our recommendation: Let us know your requirements… We will be happy to assist you in realizing your projects, from planning to ordering to assembly. Delivery can be arranged by us at a favorable price upon request.

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, total height: 2,480 mm, total width: 2,080 mm, table load: 455 kg, overall weight: 4,540 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 11,000 W, product length (max.): 2,687 mm, number of axes: 3, This 3-axis Cincinnati Milacron Sabre 750 was manufactured in 1998. It features a table clamping surface of 865 x 510 mm and a maximum table load of 455 kg. The spindle speed reaches up to 5,000 RPM, powered by an 11 kW spindle motor. If you are looking to get high-quality machining capabilities, consider the Cincinnati Milacron Sabre 750 vertical machining centre we have for sale. Contact us for further details. - Table Clamping Surface: 865 x 510 mm - Maximum Table Load: 455 kg - Tool Taper / Holder: SK40 - Spindle Motor Power: 11 kW - Tool Magazine Capacity: 21 slots - Distance Spindle Nose to Table: 127 to 687 mm - Internal Coolant Supply: Yes, through spindle at 10 bar - Program Run Hours: 10,975 hours - Electrical Power Requirement: 30 kVA (24 kW) - Compressed Air Supply: 5.5 bar - Complete manuals and documentation, optional pull studs by agreement Technical Specification Nwjdpfx Ae Ad Arfsbuen Taper Size SK 40

Condition: used, mileage: 186,000 km, power: 552 kW (750.51 HP), first registration: 05/2018, fuel type: diesel, overall weight: 63,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Manufacturer Volvo Model FH16/750 12x4/8 JUNJIN JJRZ 63 m. Concrete pump / Betonpumpe Year 2018 Condition Very good Serial Number YV2R0P0K6GA784972 Ref. nr. 368212 Reg. date: 14-05-2018 Last seen: 30-03-2026 Hk: 750 Km: 186000 Gearbox: I-Shift Eurotype: 6 Diesel tank: 1 Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: L2H1 Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: VEB + Tire Size: 385/65 - 385/65 - 385/65 - 315/80 -315/80 - 385/65 Cover% left 60 - 60 - 50 - 50 - 50 - 50% Front suspension: Springs Njdpfx Abs Aa Hfueuswn Suspension rear: Air Wheelbase: 5100mm. Rear axle, hub reduction: ? Toolbox: ? Hydraulic system: ? Total weight: 63000 kg. Net weight: 58800 kg. Manufacturer: JUNJIN JJRZ63-5 Pump capacity: 173 m3/h Hour: 4305

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Njdpezc Ilxefx Abuswn

Condition: used, Year of construction: 2017, Year: 2017 Condition: very good Counter: N/A Technical Specifications - Format: 750 × 520 mm - Speed: 28 ± 2 sheets/min - Maximum cutting rule length: ≤ 15 m - Motor power: 2.2 kW Nwsdpezuy S Tofx Abujn - Machine weight: 2,000 kg - Overall machine dimensions: 1,650 × 1,540 × 1,650 mm Configuration - Self-locking chase - Automatic central lubrication The die-cutting platen machine is designed for die-cutting, creasing and perforating paper, corrugated board and plastics.

Condition: used, Werth Werth Messtechnik Scope-Check 650×750×500/MB/Z – 3D CNC Coordinate Measuring Machine For sale is a high-quality 3D CNC coordinate measuring machine from the renowned company Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This machine is impressive due to its precision, reliability, and versatility in industrial metrology. Features & Properties: CNC-controlled 3D coordinate measuring machine Multi-sensor capable (optical and tactile measurements possible) Version with Moving-Bridge system (MB/Z) for high stability and flexibility High precision in measuring complex workpieces Robust design, intended for continuous industrial use Suitable for quality assurance, production monitoring, and development areas Additional equipment – Renishaw TP200 probe system The highly precise, tactile Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It enables quick probe tip changes and precise measurements with long probes. Key features: Strain gauge technology: Minimal deflections are registered with high accuracy – typical errors such as "lobing" are eliminated. High precision: Repeatability up to 0.4 µm, 2D probing uncertainty ±0.8 µm. Fast changeover: Automatic probe tip changeover with SCR200 changeover magazine, no recalibration required. Robust: Service life of the probe tip modules over 10 million probing operations. Flexibility: Standard (SF) and low-force modules (LF) for sensitive materials. Compatibility: Can be used with Renishaw PH10 probe heads and extensions up to 300 mm. Technical specifications (excerpt): Connection: M8 connector, Interface PI200 Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) Probing force XY: 0.02 N, Z: 0.07 N Overload force XY: up to 0.4 N, Z: up to 4.9 N Weight (sensor + module): 22 g Probe tips: M2 Nwsdpfx Ajzii Dzobuon Technical data: Manufacturer: Werth Messtechnik Model: Scope-Check 650×750×500/MB/Z Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm Supply voltage: 115–230 V AC Power consumption: max. 10 A Weight: 1360 kg Scope of delivery: Werth Scope-Check 650×750×500/MB/Z Renishaw TP200 probe system incl. probe tip modules Accessories as shown in the attached pictures Important note: "The table shown in the photos is not included in the sale." (Changes and errors in the technical data, specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2012, x-travel 760 mm y-travel 460 mm z-travel 460 mm control TNC 620 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 14 / 10 kW Torque 89 / 63,7 Nm tool taper SK 40 table surface area 900 x 410 mm max. table load 350 kg T-slots 4x number of toolpositions 24 pos. max. tool diameter 130 mm max. tool length 200 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 36 m/min Njdpfx Abozgibuouown total power requirement 20 kVA weight of the machine ca. 3,3 t dimensions of the machine ca. 3,0 x 2,5 x 2,9 m CNC Machiningcenter Vertical SPINNER - VC 750

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. Njdpfxe Afg S Ee Abuewn You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: used, mileage: 25,624 km, power: 105 kW (142.76 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 10/2028, color: red, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 7,180 mm, total width: 1,990 mm, total height: 2,870 mm, Year of construction: 2020, Internal vehicle number: G400245 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova ENGLISH Mercedes-Benz Sprinter with Multitel MT 162 EX aerial work platform – 16.2 m working height – 300 kg basket capacity. German Mercedes-Benz Sprinter with a Multitel MT 162 EX telescopic aerial work platform, manufactured in 2020. This compact 3.5-tonne vehicle combines a working height of 16.2 m with a lateral reach of up to 8.9 m and a maximum basket capacity of 300 kg. Thanks to its compact vehicle dimensions, four hydraulic outriggers, and proportional controls, this aerial work platform is suitable for various tasks, including maintenance, installation, building work, lighting, municipal work, and tree care. Technical data, chassis: * Vehicle number: G400245 * Vehicle condition: Used * Category: Aerial work platform * Manufacturer: Mercedes-Benz * Model: Sprinter * Mileage: 25,624 km * First registration: 09/2020 * Year of manufacture: 2020 * Engine displacement: 2,143 cm³ * Power: 105 kW (143 hp) * Fuel type: Diesel * Drive type: Internal combustion engine * Transmission: Automatic * Emission class: Euro 5 * Environmental badge: 4 (Green) * Wheel arrangement: 4x2 * Axles: 2 * Permissible total weight: 3,500 kg * Vehicle weight: 3,425 kg * Indicated payload: 190 kg * Technical inspection: new * Color: Red * German vehicle Vehicle dimensions: * Overall length: approx. 7,180 mm * Overall width: approx. 1,990 mm * Overall height: approx. 2,870 mm Data for the aerial work platform: Nwedpfxo Af Dt Ho Abusn * Manufacturer: Multitel Pagliero * Type: MT 162 EX * Type of superstructure: Telescopic aerial work platform * Year of manufacture of the superstructure: 2020 * Serial number: 27927 * Maximum working height: 16.2 m * Maximum lateral reach: 8.9 m * Reach at maximum height according to the nameplate: approx. 5.1 m * Maximum basket capacity: 300 kg * Permissible number of persons in the work basket: 2 persons * Maximum wind speed: 12.5 m/s * Maximum permissible inclination: 1° * CE marking available Equipment of the aerial work platform: * Aluminum work basket * Work basket for up to 2 people * Basket capacity up to 300 kg * Proportional electro-hydraulic control * Operation from the work basket and from the ground * Emergency stop switch at the control stations * Start-stop function from the work basket * Swivel work basket * Basket rotation typically 90° to the left and right * Swivel range of the upper carriage typically up to 400° * Four hydraulic outriggers * Vertically extending outriggers * Individual operation of the outriggers * Outrigger control * Aluminum boom construction * Non-slip aluminum work platform * Internally routed hydraulic lines and electrical lines * Ground control panel * Control panel on the vehicle superstructure * Warning and safety devices * Work spotlight * Rotating beacon Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale are subject to change.

Condition: used, mileage: 25,624 km, power: 105 kW (142.76 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2028, color: red, gearing type: automatic, emission class: euro5, total length: 7,180 mm, total width: 1,990 mm, total height: 2,870 mm, Year of construction: 2020, Internal vehicle number: G400245 Available immediately at our yard in Kaufungen. More information: Luis Lucena Viktoria Sologubova ENGLISH Mercedes-Benz Sprinter with Multitel MT 162 EX aerial work platform – 16.2 m working height – 300 kg basket capacity. German Mercedes-Benz Sprinter with a Multitel MT 162 EX telescopic aerial work platform, manufactured in 2020. This compact 3.5-tonne vehicle combines a working height of 16.2 m with a lateral reach of up to 8.9 m and a maximum basket capacity of 300 kg. Thanks to its compact vehicle dimensions, four hydraulic outriggers, and proportional controls, this aerial work platform is suitable for various tasks, including maintenance, installation, building work, lighting, municipal work, and tree care. Technical data, chassis: * Vehicle number: G400245 * Vehicle condition: Used * Category: Aerial work platform * Manufacturer: Mercedes-Benz * Model: Sprinter * Mileage: 25,624 km * First registration: 09/2020 * Year of manufacture: 2020 * Engine displacement: 2,143 cm³ * Power: 105 kW (143 hp) * Fuel type: Diesel * Drive type: Internal combustion engine * Transmission: Automatic * Emission class: Euro 5 * Environmental badge: 4 (Green) * Wheel arrangement: 4x2 * Axles: 2 * Permissible total weight: 3,500 kg * Vehicle weight: 3,425 kg * Indicated payload: 190 kg * Technical inspection: new * Color: Red * German vehicle Vehicle dimensions: * Overall length: approx. 7,180 mm * Overall width: approx. 1,990 mm * Overall height: approx. 2,870 mm Data for the aerial work platform: * Manufacturer: Multitel Pagliero Nwsdps Af Dtmsfx Abujn * Type: MT 162 EX * Type of superstructure: Telescopic aerial work platform * Year of manufacture of the superstructure: 2020 * Serial number: 27927 * Maximum working height: 16.2 m * Maximum lateral reach: 8.9 m * Reach at maximum height according to the nameplate: approx. 5.1 m * Maximum basket capacity: 300 kg * Permissible number of persons in the work basket: 2 persons * Maximum wind speed: 12.5 m/s * Maximum permissible inclination: 1° * CE marking available Equipment of the aerial work platform: * Aluminum work basket * Work basket for up to 2 people * Basket capacity up to 300 kg * Proportional electro-hydraulic control * Operation from the work basket and from the ground * Emergency stop switch at the control stations * Start-stop function from the work basket * Swivel work basket * Basket rotation typically 90° to the left and right * Swivel range of the upper carriage typically up to 400° * Four hydraulic outriggers * Vertically extending outriggers * Individual operation of the outriggers * Outrigger control * Aluminum boom construction * Non-slip aluminum work platform * Internally routed hydraulic lines and electrical lines * Ground control panel * Control panel on the vehicle superstructure * Warning and safety devices * Work spotlight * Rotating beacon Inspection and functional testing are possible by prior appointment. Further information, photos and videos are available upon request. Errors, changes and prior sale are subject to change.

Condition: used, Year of construction: 2018, Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Nwedpfxok Abm He Abujn Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: - Pressing force: 250 kN - Max. sheet thickness: 10 mm - Max. punch size / punching diameter: 105 mm - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm Nwsdpoz R Siijfx Abusn - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders - Punches and dies

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, 500mm Diameter table, max table weight 300kg, Nwjdpokticxefx Abusn table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Nwsdpoyid Hvefx Abujn Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, clamping force: 1,600 kN, screw diameter: 45 mm, Hydraulic injection moulding machine manufactured in 2004. This Engel Victory 750/180 Power features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It includes a screw diameter of 45 mm and a maximum injection pressure of 1,600 Bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 750/180 Power machine we have for sale. Contact us for further details regarding this machine. • Space between columns: 520 x 520 mm • Maximum mold height: 585 mm • Minimum mold height: 275 mm • Maximum injection volume: 259 cm³ • Maximum injection pressure: 1,600 bar • Centering ring: 160 mm • Hot runners in the machine: 8 • Core puller: 1 • Pneumatic valves: 2 • Programmable inputs: 2 Additional equipment Nwodpfsz Dvd Isx Abuen • Robot: Wittmann W818 (MY: 2015)