Used Knuckle-Joint Press for sale (13,117)

Condition: used, Capacity : 2000 tons, Stroke : 140 mm, Shut height : 510 mm, Ram adjustment : 25 mm, Nedsxy Rvtspfx Afhewb

Condition: used, 25/11/2025 Barnaul 1000t press in perfect working condition, equipped with a Press Transfer System Tecnomatic Italy. Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg. Nodpfxexqq E Ao Afhswb

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Nsdpfor A Eifsx Afhowb

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Nedov Tnytepfx Afhswb

Condition: used, Year of construction: 1981, Barnaul 1000t press in perfect working condition. Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Nwodsx Da Aqspfx Afhjb Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: used, 25/11/2025 Knuckle-joint press A.COLOMBO 1600 ton. Manufacturer Agostino Colombo Model G 1600 Nwsdpfx Ajxbtbzofhob Nominal capacity 1600 ton Table size 1060 x 900 mm Stroke 135 mm Shut height 635 mm Ram adjustment 20 mm Side opening 400 mm Motor 45 HP

Condition: new, For processing all common aluminium window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Universally applicable thanks to double adjustable punching tools. Suitable for corner brackets with groove dimensions from 25 to 60 mm and profile chamber offset from 0 to 40 mm. Continuously height-adjustable feelers, punch blades and stop inserts. Feelers and punching units are equipped with scales. Retractable stop for easy insertion of profiles, self-adjusting when advancing against the profile. Hydraulic stop locking. Nodpfx Ajhmfyhefhjwb Pneumatic pressing operation via a lever system ensures a synchronous punching process. 2 pneumatic hold-down cylinders for clamping the profiles. 2 eccentric discs for positioning the frames. 2 swiveling profile support arms. Operation via 2 foot valves. Includes standard tooling.

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Cycle press for finger joints Finger joint press Pressing force 10 t Wood width 80-300 mm Wood thickness 18-80 mm Nwedpfx Afet Sc T Iehjb OPTIONAL with hydraulic unit

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, Hydraulic finger jointing press (Keilzinkpresse), cycle press for finger joint connections, pressing force 10 t. For wood width 80–300 mm and thickness 18–80 mm. OPTIONAL: with 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD, with electrical installation. Nwjdot Sc Swspfx Afhob

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Nwodpfx Afev T Aqyjhjb Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Year of construction: 2008, condition: reconditioned (used), Max gluing length 3m Minimum gluing length 1.5m Press in perfect technical condition The presse worked with Spanevello ARROW Nsdpfxjk Uw Uks Afhjwb

Condition: good (used), Schmedt PraForm HHS 2100 Book Press with joint forming Book press with groove burner. Machine in perfect condition, purchased from the national library. Practically unused. Produced by Schmedt, Germany. Technical data: Nodpewud Tdjfx Afhswb max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Njdpfxowud Tko Afhowb Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Nwedpfxexgi Hqe Afheb Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, Corner Jointing Machine EV175 Nwodpjxta Rmofx Afhsb Stable and precise corner joints The EV175 combines cost-effectiveness with high corner stability. The ideal machine for all standard profiles and corner brackets.

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Nwedpfx Aormul Defhsb On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2000, machine/vehicle number: 124, Falzeinbrenn- und Abpressmaschine - Book press and joint-setting machine Zechini CIMATICYear 2000 - Serial-No. 124/00 Buch Format max. Buchhöhe 48cm x Buchbreite 35cm x Buchblockstärke 9cm Book Size max. height 48cm x width 35cm x thickness 9cm Leistung max 150 in St./h / Output 150 pcs/h Pressluftanschluss 6 bar / Air pressure supply 6 bar Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Nwedpfeh Ayanjx Afhob Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. Nsdpspbwdljfx Afhjwb This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 6305/7, pressing force: 15 t, working height: 905 mm, total length: 1,900 mm, pressing force 15 t line consisting of : feed rollers with servo drive press 15 t inclusive hydraulic unit feed rollers with servo drive Nsdpfxeg T Spae Afhjwb saw >>without electrical equipment

Year of construction: 2025, condition: new, Table dimensions 1000 x 400 mm pneumatic clamping 4 Stk. moveable ja_yes ja loading dimensions L x W x H 1200x800x1200 mm weight 220 kg For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) Nedpfxjx Ak Hqe Afhewb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1300x800x1350 mm Weight 370 kg Nwjdjv A E Nkspfx Afhjb Total power requirement 0 kw

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Njdpfx Afet Uduxjhowb

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, total height: 2,120 mm, installation height: 2,120 mm, total width: 1,000 mm, throat depth: 695 mm, operating speed: 12 mm/s, overall weight: 1,200 kg, reverse speed: 9 mm/s, pressure: 12 bar, Hydraulic press Profi Press automatic 60 Tonnes single phase hardly used Technical specifications Pressure force [kN]: 600 Maximum pressure [bar]: 259 Piston stroke [mm]: 380 Oil capacity [dm³]: 38 Working speed [mm/sec]: 2,87 Approaching speed [mm/sec]: 9,5 Return speed [mm/sec]: 12 Motor power [kW]: 2.2 Nodpfxjx Dzfao Afhewb Voltage [V]: 400/3 Frequency [Hz]: 50/60 Working width [mm]: 750 Weight [kg]: 540 Diameters Inside diameter of cylinder [mm]: 170 Diameter of piston rod [mm]: 75 Diameter of piston head [mm]: 100 COLLECTION ONLY FROM MANCHESTER Payment on collection No Vat . Features of this workshop press (60 ton M/H-2) Integrated pressure manometer Pressure regulation Hydraulic unit with a 2-speeds handle In height adjustable working table Joystick for the control of the piston Hand pump for precision pressing Optional accessories Movable cylinder Foot pedal, two-hands operation or hand remote controller V-block set for extra support Mandrel set / Pressure pins Digital stroke read-out Table plate / pressing table Protection screens (customisable) Dimensions in mm A: 2120 B: 1000 C: 695 D: 750 E: 260 F: 1315 G: 150 H: 197 I: 750 J: 805 K: 200 NO VAT ! , no vat added.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine, year of manufacture 2025! Nwsdpfx Afox Tp N Ushjb TECHNICAL DETAILS Shaft diameter: 50 mm Roller diameter: 155 mm Capacity round diameter: 50 mm Shaft speed: 11 rpm Number of rollers: 3 pcs. MACHINE DETAILS Control: Conventional Power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Net weight: 450 kg Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, table width: 550 mm, table length: 300 mm, stroke length: 180 mm, pressing force: 28 t, empty load weight: 800 kg, Unused band bending machine, year of manufacture 2025! TECHNICAL DETAILS Capacity: 28 t Max. stroke: 180 mm Table width: 550 mm Table length: 300 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Nedpfox Tp E Aex Afhewb Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Net weight: 800 kg Transport packages: 1 piece Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate