Used Hsm Powerline Fa 500.3 for sale (3,718)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Dsdpfx Aljyqw Sqe Sowc Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2014 Dsdpfxozxqnms Al Sswc Pressing force: 40 t

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old Dwodpfx Ajzzknxol Sec ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Coolant and air supply from outside

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Pressing force: 40 t Dwedozxqmispfx Al Soc

Condition: used, Model: HSM V-press 1160 plus baler Dwjdpfxjv Al Tie Al Soc Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Weight of one bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Design features large loading opening for cardboard option for automatic feeding (e.g., with a conveyor) manual wire tying (4 wires) pallet lock and hydraulic door for bale removal Advantages of this press large bales – fewer transports high crushing force designed for continuous operation Dedpfx Aera Dddsl Sjwc Available model years: 2017-2020

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS, PAPER PRESS, FOIL PRESS, BALING PRESS Immediately ready for use, good condition Used & good / see photos Model: HSM 500.1 VL Machine No. 6135.244.P Serial No. 220109689 Pressing force 50 tons V 400; Hz 50 kW 7.5 Amps 15.5 Pressing power 6 tons Year of manufacture 2001 More presses in our other offers Item used and good / roughly cleaned (Plug it in and you're ready to go) Dimensions: On request!! Additional photos show further possible uses. All items shown in the photos are also available from us. Price quoted net per piece upon collection from warehouse 47441 Moers Current stock: 1 piece Inspection is expressly offered. More equipment in stock see photos or inquire by phone General: We are offering articles from various acquisitions, which we describe as well as possible and provide informative photos. No further information can be provided about the item. Dwjdpfx Aolc Du Nel Sec We offer the possibility of inspection on Tuesdays and Thursdays between 9 am and 4 pm by prior telephone appointment. If required, the item can be taken away immediately. Due to time constraints, we can only answer questions about this item if you provide us with a telephone number in your inquiry. Unless explicitly stated, this offer is for USED GOODS. Any packaging may be damaged. Items have been visually inspected and are technically in order as far as possible. All offers are ex warehouse 47441 Moers. If you would like shipping, please contact us to discuss packaging and shipping costs. If you are interested, please do not hesitate to call us. All dimensions are approximate. Errors and omissions in the description are expressly reserved.

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, filling opening width: 580 mm, filling opening length: 900 mm, bale length: 800 mm, bale width: 500 mm, bale height: 600 mm, bale weight: 100 kg, total width: 1,000 mm, total height: 1,540 mm, total length: 4,700 mm, overall weight: 1,200 kg, power: 6.8 kW (9.25 HP), transport length: 4,700 mm, Equipment: documentation/manual, safety light barrier, The machine has been overhauled by us and was completely disassembled. Main cylinder resealed. New hydraulic hoses. New hydraulic oil. Sub-oil motor. Djdpfsy D Dr Sjx Al Sowc Plexiglass panels replaced. Guide rollers on the press plate readjusted. Triple horizontal manual tying. Tying with wire. Bale length adjustable: 400, 600, 800, 1000 mm. Operating manual with electrical and hydraulic diagrams available.

Condition: used, Year of construction: 2011, functionality: fully functional, power of the servo motor: 550 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, compressed air connection: 6 bar, Matched Set of Five Brother Industrial Overlock Machines from the MASI JEANS Factory This lot consists of five Brother industrial overlock (serger) sewing machines, removed directly from the professional production lines of the former MASI JEANS factory in Estonia. Brother's industrial overlock machines are known worldwide for dependable high-speed operation, clean seam formation and low maintenance requirements. The lot combines two Brother FB-N210 4-thread overlock machines (2012) with three Brother FA-V92A-5050 4-thread overlock machines (2009) - one closely matched platform generation. All machines were operated in the same professional production facility and maintained under the same factory maintenance program, making this an excellent opportunity to acquire a factory-matched overlock production set with common operating principles, shared spare parts inventory and simplified maintenance. Ideally suited for denim manufacturing, jeans assembly, knitwear, workwear and other applications requiring fast, durable overedging seams. Bundle Contents Machine 1 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 37B-7268 Machine 2 Model: Brother FB-N210 (4-thread) Year: 2012 Internal Reference: 36B-7267 Machine 3 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 4B-7212 Machine 4 Model: Brother FA-V92A-5050-55-E3V Year: 2009 Internal Reference: 30B-7213 Machine 5 Model: Brother FA-V92A-5050-57-E3V Internal Reference: 31B-7214 Technical Specifications Manufacturer: Brother Industries, Ltd. Model Series: FB-N210 (2 machines) / FA-V92A-5050 (3 machines) Machine Type: Industrial 4-Thread Overlock (Serger) Sewing Machine Country of Manufacture: Japan 4-Thread Overlock Configuration Built-In Fabric Trimming Knife System Automatic Lubrication Industrial Sewing Tables Heavy-Duty Steel Stands Professionally serviced (ERMACO ISM service partner) Production Benefits • Factory-matched Brother overlock production set • One platform generation - common parts and know-how • High-speed overedging with clean seam formation • Reliable performance during continuous production • Reduced operator training requirements Why Purchase This Lot • Five professional Brother overlock machines • Matching machines from one factory • Complete overlock capacity for a production line from one source • Shared maintenance procedures and spare parts inventory • Cost-effective production line setup or expansion Applications • Jeans production • Denim manufacturing • Seam serging and overedging • Knitwear and jersey garments • Workwear manufacturing • Uniform production • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained in operation until the recent closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading and transportation. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot. Dedpfx Ajznyx Hsl Sewc

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 - heating: included Dodpfxen Hxiio Al Sswc - cooling: included

Year of construction: 2008, condition: used, Asparagus peeling machine with eight stations The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table. The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. Dwjdpfx Alez Nc Tye Sec More photos and full specifications: / Type: Asparagus peeler (Schäl-Automat) Stations: 8, each switchable Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW Construction: Stainless steel, on castors

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: Djdpfx Aera Nrmsl Sowc L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Year of construction: 1996, condition: used, Baling press Manufacturer: HSM Dwjdszuz D Ropfx Al Sec Type: 55.1VL Year of manufacture: 1996 Technical data - 4.0 kW motor - 18 t pressing force - 400 V / 50 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Year of construction: 1987, condition: used, Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible. Dwjdpezybumjfx Al Sjc

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 Dsdpfx Asra Rbgjl Sewc HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: excellent (used), Baling press Hsm HL 4809 - Large filling opening, ideal for large boxes - Container tipper for convenient filling Power in kN: 480 - Motor in kW: 10.7 - Voltage/frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Dimensions of the device length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 Dedpfxjv Ak Nps Al Sowc - Manual tying: 4 times with wire Year 2015-2017 Complete baler, side housings unscrewed for transport Balers after inspection by an authorized service center

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Dodpfx Alsv Akcie Sjwc Machine weight: 1063 kg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: good (used), Year of construction: 2009, operating hours: 1,850 h, functionality: fully functional, overall weight: 4,000 kg, Equipment: documentation/manual, The machine was put into operation in Switzerland in 2010 and operated flawlessly until its last day. The machine comes from a prototype development department, which explains the low number of operating hours. Dwodpfx Aloz Hzz Do Soc

Condition: used, Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Dwjdpox H R U Sefx Al Soc Model: HL 4010 Li Year of manufacture: 2012 Pressing force: 40 t

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control Dsdpozm N Nrsfx Al Sewc WST-30 Horizontal turning station Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm

Condition: ready for operation (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 532 Bale weight depending on material: up to 550 kg Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 7.5 Weight (kg): 2300 Year 2007-2010, price: 5800 EUR Year 2011-2013, price: 6000 EUR YEAR 2018 COSTS 6000 EUR Dwedsra Nyujpfx Al Ssc We also have HSM V-press 1160 max balers from 2014-2015 available.

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Dodpfx Alsv Ai Tge Sowc Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Machine weight: 940 kg Year 2001-2005

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Dwodev Akmzopfx Al Ssc Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, 1 x Proseal inline heat sealing machine with 1 x set of tooling. This is an inline, high-speed, fully automatic tray sealing machine designed for various food applications, including ready meals, fresh produce, meat, and fish. Manufacturer - Proseal. Model - Fastpack F45. Serial number - SN-M01448. Date of manufacture - 2006. Output - up to 15 cycles per minute. Tooling - 4 x 1 format, for Faerch C2215-HD trays measuring 215mm long x 127mm wide (internal dimensions 173mm long x 85mm wide). Overall dimensions - 3050mm long x 900mm wide x 2150mm high. Dedpfx Alsy Hi U Rs Sjwc Condition - Good / Fully operational. Previous use - seal trays of various desserts.

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Dodpjw Az E Tofx Al Sowc