Used Hwacheon Hi-Tech 700 Ii Mc for sale (16,607)

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Dedpfx Anex Eu Tvozswa

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Dwjdpfx Asx Dw Iwjnzea

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Dwedex Dw Iqepfx Anzea

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW Djdpfx Ajy A Tdnsnzjwa weight of the machine ca. 10,6 t

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis Dwjdpfx Anozb N Uxjzsa - Subspindle - WITHOUT extraction system

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Dsdsu Rnluepfx Anzewa Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: HSK 63 Magazine capacity HSK 63: 60 tools Equipment: - 3D trajectory control MillPlus IT - Horizontal double gripper tool changer - Automatic swivel milling head - Rotating safety viewing window - NC rotary table with pallet support - Pallet changer - 2 pallets, 630 x 500 mm - Universal milling head with controlled B-axis HSK 63 (only in combination with HSK 63 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4: Extended manual intervention - Rinsing gun with pump - Tool breakage monitoring HSK 63, mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent operation chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar

Condition: new, Year of construction: 2026, English translation: The LUFT 700 VSD+PM COMPACT oil-lubricated compressor with dryer features a traditional belt-driven transmission, which results in significantly easier maintenance and lower service costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and when worn, the belt can be easily replaced with a new one. This design also ensures longer service life of components. The absence of a rigid connection between the motor and the compressor’s working elements reduces wear and mechanical stress. The maximum pressure generated by this screw compressor is 10 bar. Full control over the operating parameters is provided by an intuitive MAM-series electronic control panel, which gives access to key device information, increasing flexibility and control over processes. Technical parameters Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: average 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Dodpfoybvkaex Anzjwa Outlet connection diameter (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg

Condition: used, Year of construction: 2002, We are offering this used Finnsonic MC-360/III ultrasonic cleaning system, year of manufacture 2002. Dwsdpfx Aeywua Tsnzoa If you have any questions or require further information, please feel free to send us a message or give us a call. The dimensions of the individual tanks are approximately: width 750 mm x depth 600 mm x height 600 mm.

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation Dsdpfxex Icyvs Anzswa -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor Dedjtmtktepfx Anzjwa

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, Dsdpfju Rb Snjx Anzowa swarf conveyor

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 495 441, Vertical grinders for producing pearl barley, spelt, and emmer wheat, as well as for grinding lentils. Dwjdjznuiaopfx Anzoa

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 500 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Djdpfxoycg Ryo Anzewa Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1840 × 640 × 1470 mm Weight: 320 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series Dwsdpfx Anjycg I Sszsa 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: used, functionality: fully functional, machine/vehicle number: 1702, Year of construction: 2024, load capacity: 8,000 kg, lifting height: 5,500 mm, free lift: 1,945 mm, fuel type: electric, mast type: triplex, construction height: 3,220 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 1702 Mast type: Triplex Gearbox: Impulse control Technical condition: normal Dwodsy Up Sljpfx Anzea 3rd valve, 4th valve, rear working lights, front working lights, roof cover, heating, load protection grille, full cab, impulse control, safety light, interior mirror, exterior mirror, Load center of gravity at 900mm

Condition: good (used), mileage: 192,976 km, power: 132 kW (179.47 HP), first registration: 02/2017, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel tank capacity: 70 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total width: 2,170 mm, permissible axle load (axle 1): 1,900 kg, permissible axle load (axle 2): 2,800 kg, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, crane, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Equipment = - Alarm system - Front work lights - Armrest - Steering wheel audio controls - Exterior mirrors with integrated indicators - AUX input - Outside temperature display - Document holder - Digital radio - Tachometer - Third brake light - Driver’s seat height adjustment - Remote central locking - Tinted glass - Folding exterior mirrors - Air conditioning - Multifunction steering wheel - Particulate filter - Radio/CD player Dwodpfsy Rfa Djx Anzoa - Spare wheel - Disc brakes - Headlamp level adjustment - Immobilizer - Touchscreen = Additional Information = General Information Number of doors: 2 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 2,998 cc Maximum front axle load: 1,900 kg Maximum rear axle load: 2,800 kg Weights Unladen weight: 3,222 kg Payload: 978 kg Gross vehicle weight: 4,200 kg Functional Lifting capacity: 1,100 kg Lifting height: 370 cm Crane: Amco Veba V602T 2S, year of manufacture 2016, mounted behind cab Maintenance, History and Condition Service booklets: Available (dealer maintenance) Technical condition: good Visual condition: good Financial Information VAT/margin: VAT deductible = Company Information = Nidro cars Holland is located in the centre of the country and is your trusted address for the purchase of your car, van, or truck. The indicated price is the 'internet take-away price.' For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE STOCK AT All types of trade-ins are welcome! (Our advertisements are compiled with great care, but no rights can be derived from their content).

Condition: used, This listing is for a Thermo Orion EZ Flash II Dsdpexzhr Usfx Anzowa

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 670 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 470 mm, nominal power (apparent): 10 kVA, controller manufacturer: SELCA, controller model: 3045P, table width: 490 mm, table length: 900 mm, overall weight: 4,800 kg, spindle speed (max.): 9,000 rpm, input voltage: 400 V, Vertical machining center FAMUP MCX 700 Spindle speed: 9000 rpm X-axis travel: 670 mm Y-axis travel: 480 mm Z-axis travel: 470 mm Spindle-table distance min-max: 180 - 650 mm Djdpoycq E Uofx Anzowa CNC: SELCA 3045P Table size: 900 x 490 mm T-slots: 3 T-slot pitch: 125 mm T-slot width: 18 mm Taper: DIN 69871 ISO 40 Tool magazine positions: 24 Max. tool diameter: 100 mm Max. tool width: 280 mm Motor power: 10 kW Power supply: 400V Machine dimensions: 2200 x 2900 x 2965 (H) mm Weight: 4800 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 23,574 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 8,000 rpm, The following machine components have been renewed: - Motor & pump of the hydraulic system - Hydraulic and pneumatic hoses (partially) - Control cabinet LT module replaced - Drum of the Knoll system TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 560 mm Travel distance Z-axis: 560 mm B-axis: 360 x 0.001° (60 rpm) Spindle speed: 8,000 rpm Table size: 6 pallets, each 500 x 400 mm Table width: 400 mm Table length: 500 mm Table load capacity: 350 kg Working feed rate: 1 - 60,000 mm/min Rapid traverse: 60 m/min MACHINE DETAILS CNC control model: Siemens Sinumerik 840D Total length: 7,000 mm Total width: 5,000 mm Coolant supply: 50 bar Coolant system capacity: approx. 1,100 L Motor power: 13 kW / 20 kW Torque: 124 / 191 Nm Dwodpfjy Nbunsx Anzja Total power requirement: 20 kW Dimensions & Weight Space requirement (L x W): 7 x 5 m Machine weight: approx. 16,000 kg Operating hours Power-on time: approx. 48,804 h Spindle operating hours: total 23,574 h EQUIPMENT - Documentation/Manual - Steplessly adjustable spindle speed - Chip conveyor - Knoll cooling unit with drum filter (30/40/50 bar via M-command) - Tool measurement: Renishaw probe - Tool breakage monitoring in the working area - Pallet storage (4 positions) - Pallet sequence operation - Fully enclosed work area in accordance with UVV - Network capability - Technical documents & layout plan

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Dsdpfxeww I Tmo Anzewa

Condition: good (used), mileage: 105,756 km, power: 338 kW (459.55 HP), first registration: 10/2017, fuel type: diesel, wheelbase: 5,650 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: AdBlue, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Number of cylinders: 6 Engine displacement: 10,837 cc Djdpfxjxzq Hhj Anzewa Unladen weight: 20,300 kg Payload: 16,700 kg Gross vehicle weight: 37,000 kg Technical condition: good Visual condition: good

Condition: new, Type: ST-700 Sealing length: 4 * 620 mm Vacuum pump: 40 m3/h Machine cycle: 20 - 40 sec. Voltage: 380 V, 50 Hz Dwjdpfxoh Dp Nrj Anzsa Electric power: 3.3 kW Machine dimension in cm: Width: 145 Lenght: 65 Height: 98 Delivery time: after advanced payment, 1 working day

Condition: excellent (used), Year of construction: 2002, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece height (max.): 1,230 mm, workpiece diameter (max.): 1,250 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Djdpsw Ngipsfx Anzjwa Automatic head +180/-7° stepless HSK A63 Number of pallets: 2 pcs Pallet size: 1000*800 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1120 000155 3, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item by 16.01.2026! For loading, a complete semi-trailer with a height of 3 m is required. The consignment comprises 8 packages. Dwjdpfxsxywlzs Anzja

Year of construction: 2010, condition: ready for operation (used), A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible. Dsdpjy N Uxaefx Anzowa