Used Ideal Lippstadt Ds3 Ne for sale (16,892)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Bjdpfxszaz Tks Am Tedf Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: good (used), Cutting machine Ideal 5560 Bdedpfx Amjx Sx A Ue Tjf The machine comes from a government agency. Item no. L1122

Condition: new, Incl. parabolic suspension / spare wheel / full-width ramp / lockable coupling head / spiral cable Technical data: • Brand: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: none • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 303 x 157 x 30 cm • External dimensions (LxWxH): 502 x 209 x 162 cm • Loading height (floor): 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 664 kg • Payload: 2,836 kg • Chassis: Low loader (wheels beside the platform) Bdedpjx S Ri Tsfx Am Tjf • Tyres: 155/70R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced side panels, covered with tread plate and walkable • 24 mm anti-slip, waterproof phenolic plywood floor • Extremely robust, fully welded tubular steel frame • Frame fully hot-dip galvanised in immersion bath • 2 individual ramps (skids), standing on shaft, 120 cm high • Ultra-low chassis for minimal loading angle • Excavator bucket rest at the front • Spare wheel mounted under excavator bucket rest • 6 lashing rings mounted in the sideboard • 4 foldable lashing eyes (plate anchors) mounted in the floor • KNOTT leaf spring axles for maximum heavy-duty use • Automatic reverse mechanism • KNOTT overrun hitch and parking brake • Lockable coupling head • Very robust, bolted, reinforced V-drawbar • 13-pin plug • Removable plug cable from front wall • Reversing light • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in the rear frame • Heavy-duty centre support wheel Optional equipment – available on request: Various accessories can be retrofitted to this trailer as shown in the pictures, e.g.: - 4 foldable lashing eyes (plate anchors) mounted in the floor New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be shipped in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, mistakes, and prior sale excepted -

Condition: new, IDEAL Krug & Priester 1080 Lever Cutter Bjdpfx Aex R Scxem Tedf Material blade sharpening angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets, and other materials Resharpenable blade set made of Solingen steel Complete with solid base and foot press Fold-out side table, right Side fence with scale in mm and inches Infinitely adjustable back fence with locking screw Front fence with locking screw and narrow cutting attachment Scale knob for precise front fence adjustment Printed DIN format markings A3 to A6 Fixed, transparent blade guard made of shatterproof plastic with blade locking device Extra stable die-cast aluminum blade bearing and double-bearing blade axle for precise cuts Extremely robust metal construction GS certified Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. 20 sheets (70 g/m² paper) - 4 mm clearance Table size (W x D): 605 x 800 mm Dimensions (H x W x D): 1215 x 670 x 1080 mm Width with side table extended: 890 mm Weight: 55 kg Condition: New More cutting machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: refurbished (used), functionality: fully functional, S2G, specializing in the sale of graphic equipment since 29 years, offers several fully serviced and fully functional IDEAL/EBA paper cutters. Our available models are listed below: IDEAL 4855 Bodpfoy Nx Dmsx Am Tsdf IDEAL 5221 EBA 550 EBA 551-06 LT EBA 721-06 LT For photos, videos, and technical details, please contact us. Shipping available on a pallet.

Condition: used, sheet width 400 mm plate thickness 3 mm stations . System with the best coiler, straightener, eccentric press, and profile rolling machine Cutting-off system and numerous accessories Iron double coiler Type SFD 2000 Schleicher straightener Edelhoff AZR 3/100 eccentric press Bdjdpfsyq Sx Eox Am Tef Press force 100 t Stroke adjustment 20-110 mm Ram adjustment 100 mm Ram strokes 105 /min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2007, machine/vehicle number: 3185364, Cutting machine IDEAL 4850-95 EP, machine number 3185364, year of manufacture 2007, program control, safety guard, in good condition, available immediately If you are interested, we will be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment. Bdedpfxsq Nl T Ns Am Tjf

Condition: good (used), Year of construction: 2008, machine/vehicle number: 2848081, IDEAL 5221-05 EP cutting machine, serial number 2848081, built in 2008, in good condition, available immediately. Bedsvt Rt Ajpfx Am Tsdf If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Condition: excellent (used), Year of construction: 2006, Year 2006 Bdedpfx Amev H Eyqs Tsf Cutting width 72 cm Spare knife Air table

Condition: good (used), Equipment 2 knives Bdjdpfxsfbgayo Am Tof

Year of construction: 1988, condition: ready for operation (used), A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible. Bdedpfewfg Ewsx Am Tef

Condition: used, Year of construction: 2019, functionality: fully functional, Used paper cutter, but the blade is in excellent condition. Bsdpfx Asxw Nu Njm Tsdf

Condition: used, Year of construction: 2021, functionality: fully functional, Handles bi-metal, carbide, wood, and stainless steel blades up to 50 mm wide, with a 6-stage welding current adjustment covering a wide range of blade dimensions and materials. Hydraulic clamping on both sides — operated by foot switches — keeps both hands free for blade positioning and ensures consistent electrode contact at up to 10 kN clamping force. Equipped with the GTR pyrometer option: annealing temperature is set by recipe and monitored contactlessly, ending the cycle automatically for repeatable, operator-independent weld quality. Machine is from 2021, in very good condition, water-cooled, and ready for immediate production use. Make and Model: iDEAL BAS 050-11 Nominal power (50% DC): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Upsetting force max. 2.2 kN Machine weight: approx. 180 kg Clamping: hydraulic, foot switch operation Pyrometer (GTR): yes (temperature display on touch panel) Connection voltage : 380 - 419 V Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Bjdpfx Ajy S Nc Ssm Todf Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm Strip steel S235JR: max. cross-section 75 mm² Strip steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: Integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. Target temperature is stored in the recipe and displayed on the touch panel — the annealing cycle ends automatically when the set temperature is reached, eliminating operator-dependent variables and ensuring repeatable weld quality.

Condition: new, Year of construction: 2026, machine/vehicle number: A1481630, Complete finishing line max. product dim. lenth = 2000mm, width = 750mm, hight = 1000mm max. weight 50kg (higher weight possible) speed up tp max. 1m/min. (higher speed possible) Bdjdpfx Amjbqh R Ts Tsf Please contact us for more information.

Condition: excellent (used), Band saw welder IDEAL model BSO Bdedpfx Amoxw H Srj Tof

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Bdedpfox H Tadox Am Tef Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: used, Year of construction: 2015, Type: LBS043 / 80 / 1.5 Coil joining machine. With Fronius Trans Tig 2200 Job G/F Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 mm. Used machine in working condition. Strip width: 15 – 80 mm. Bjdslddxhspfx Am Tsdf Strip thickness: 0.5 – 1.5 mm. Power: 400 V / 50 Hz. Shears on the right not included. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Flash Butt welding machine. Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Delivery from stock. Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included. Bdsdpfx Amsw Snu Se Tjf

Condition: good (used), Year of construction: 2011, operating hours: 967 h, fuel type: electric, Nifty HR12 NE Articulating Boom Lift 4x2 Electric, 2011, 12m Working Height A video can be sent via WhatsApp. Continuous stock available, see website. Prices are ex Nuland. Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without warranties (see our general terms and conditions). Bdjdpfxozqhlme Am Tef You can arrange a viewing and/or test drive by appointment, with no obligation. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Year of construction: 2010, fuel type: electric, Nifty HR12 NE Articulated Boom Lift / Mobile Elevated Work Platform / Articulated Boom 4x2 Electric 2010 Batteries replaced in 2023 Bdodpfxozqdxio Am Tef A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: DG15000SE3-3D, type of input current: three-phase, input voltage: 230 V, type of cooling: air, total width: 1,130 mm, total length: 760 mm, total height: 860 mm, fuel: diesel, overall weight: 230 kg, continuous power (apparent): 12 kVA, continuous power: 10 kW (13.60 HP), rotational speed (max.): 3,000 rpm, rotational speed (min.): 3,000 rpm, warranty duration: 12 months, noise level: 75 dB, fuel tank capacity: 30 l, power: 11 kW (14.96 HP), input frequency: 50 Hz, We provide the mobile power generators for your uninterrupted power requirements The DG15000SE3-3D power generator offers you an output of 11000 watts with its reliable 4-stroke engine. You can operate the DG15000SE3-3D power generator with its 30L tank for up to 8-10 hours. You can start the generator using the electric start or the cable pull. The starter battery is charged during operation, making it easy to start the next time you use it. Technical data: Maximum output : 11 kW Rated power : 10 kW Frequency : 50 Hz Speed : 300 rpm. Rated voltage: 230 V / 400V Power factor (cosφ) 1.0 DC output 12V/8.3A Bodpfx Amstmu Nfs Tjdf Power SINGLE-PHASE / THREE-PHASE E-Start Noise level (7m) 70-73 dB Tank capacity (L) 30 L Dimensions 1130x760x860 mm Weight 230kgs

Condition: used, Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.  Type of Machine: Butter Packaging Machine Capacity: ± 600 Kg/h Butter Brick Dimensions: 125mm length x 55mm width x 40 mm height Weight: 250 grams Machine Weight: 840 kg Bdsdpfx Amjzhlmio Tsf Packaging type: Aluminium and Parchment Paper Motor power: 1,5 kW

Condition: good (used), Top of the range plate washing system for high throughput. Has come from Wembley Football Stadium where it was washing plates for the hospitality areas. Lovely condition and with options Bodpfxsvd Eiye Am Tedf

Condition: used, Year of construction: 1998, Used dedusting unit Year of manufacture: 1998 Note: The unit does not have a fire extinguishing system! Equipment and technical data: - Volume flow: 3,530 m³/h - Suction nozzle: 250 mm Bdsdeznfpqjpfx Am Tef - Filter surface area: 25.2 m² - Number of collection containers: 3 - Negative pressure: 2,500 Pa - Collection container volume: 480 l - Motor: 5.5 kW - Automatic cleaning - Filter category: H2 - CE marking: Yes Weight: 740 kg Availability: short notice Location: Flörsheim

Condition: used, maximum load weight: 31,960 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2011, total width: 2,550 mm, Year of construction: 2011, Additional information: * Type | First axle: Goodyear R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 90% * Tire tread depth inner right | First axle: 90% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Continental R Bjdpfxoy Dy U As Am Todf * Type | Third axle: Bridgestone R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Alloy rims | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Alloy rims | Second axle: Yes * Alloy rims | Third axle: Yes Additional features: * Alcoa wheels * Homepage * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your specific country. Location | Maasdijk (NL) | 140 km from the German border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.