Used Ima 410 V 140/600 for sale (49,325)

Condition: used, Year of construction: 2008, operating hours: 5,300 h, functionality: fully functional, turning length: 740 mm, turning diameter over cross slide: 350 mm, spindle motor power: 21 W, travel distance X-axis: 340 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 600 mm, overall weight: 6,900 kg, Equipment: documentation/manual, Gildemeister CTX 410 V4 Universal lathe Control system: Fanuc 32i Bwsdjzzzqqjpfx Al Aju Main drive: 21 kW, 240 Nm Turret: Sauter Year of manufacture: 2008 Travel distances: X-axis: 340 mm Y-axis: 40 + Z-axis: 600 mm 1 chip conveyor Tailstock Hydraulic hollow chuck, maximum draw tube inner diameter 66 mm Automatic sliding shield operation Option: Enhanced coolant pump, 12 bar, 23 l/min Coolant gun 3-jaw chuck BRD210, SMW Autoblock Foot switch for tailstock operation Tooling available upon request Documentation and export possible for an additional charge. Inspection possible while the machine is powered on. We would be happy to send you further details or arrange an on-site inspection.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit Bwedpfxezuykvj Al Asu 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 1999, - 4-axis machine Bjdpfx Aozz Iziel Aowu - Support table 2800 x 1050 mm - Main spindle 7.5 / 9.0 kW - with drilling head and slotting cutter

Year of construction: 2017, operating hours: 1,752 h, condition: excellent (used), functionality: fully functional, Calender Monti Antonio 72-3600 + Plotter Mimaki JV5 320s Calender Monti Antonio 72-3600 Calender in very good technical condition, regularly lubricated. Cylinder diameter: 200 mm Material width: 3,200 mm Required pressure: 6-8 bar Speed: 0.1 - 1.7 m/min Max. temperature: 230 °C Maximum power consumption: 19 kWh, average consumption: 13 kWh Operating hours: 1752h Meter reading: 58104m Included with the calender is the graphic printer plotter Mimaki JV5-320s: The machine is in very good technical condition, all nozzles are open, regularly cleaned. On 07/07/2023, all print heads and accessories were replaced: - DX5 print head – 4 pcs - Dampers – 32 pcs - Captops – 4 pcs - Pumps – 4 pcs Bsdpfot Rhmkjx Al Aswu - FPC tapes – 4 pcs - Sponges Approx. 1000 running meters have been printed since then. Total machine output: 13543m

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Bwsdpshu U Nxjfx Al Aou Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (Nr. 2 reels) OPTIONALS: Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Drilling Aggregate (with 4 horizontal boring spindles)

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine Bwjdpfxex D Di Uo Al Aju • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)

Condition: ready for operation (used), functionality: fully functional, Mixer is working disassembled Bjdpfxeunkyzs Al Aowu lump breaker Side valve First photo is before the revision and disassembly. mixer is incl. control cabinet and platform with stairs.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Bodpfjtnz Ttjx Al Ajwu Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) Bjdpfx Alsz Eikwj Aswu belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: good (used), Year of construction: 2006, CNC - lathe machine Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year: 2006 SPECIFICATIONS Max. turning length: 1.250 mm Max. swing over bed: 600 mm Max. swing over slide: 410 mm Spindle bore: 90 mm Amount of controlled axes: 2 Spindle speeds: 3.000 rpm Spindle power: 36,5 / 27,5 kW Torque: 785 Nm Tailstock: MK 5 Quill: 80mm Bwodpfx Aloziyz Ds Aou Amount of turrets: 1 Tool: VDI 40/8 Tool capacity: 8 Machine weight: 5.500 kg Req. space (LxBxH): 5,0 x 2,0 x 2,2 m m Equipment Chip conveyor 3-jaw chuck: 315 mm Main Spindle: neu gelagert Innenraum neu lackiert Wartungspaket

Condition: used, Year of construction: 2008, machine/vehicle number: 50071, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 42 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, height adjustment type: electric, feed rate X-axis: 16 m/min, actuation type: pneumatic, total height: 1,600 mm, total length: 7,200 mm, total width: 1,600 mm, overall weight: 3,700 kg, Equipment: CE marking, documentation/manual, We offer this well maintained IMA Advantage 60 edgebander, year of manufacture 2008. Machine type: Advantage 60 Serial number: 50071 Year of manufacture: 2008 Voltage: 400 V Frequency: 50 Hz Electrical supply: 3 N PE Nominal power: 18 kW Nominal current: 42 A Bjdpjy Um Tmofx Al Aewu The machine has the following groups: Premilling Blow-off nozzle for removing loose particles Heating unit Gluing unit End trimming unit MFA unit for milling/corner rounding Profile scrapper Cleaning agent application unit Riepe Flat scrapper Brushes Grooving unit With two interchangeable glue pots If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Bsdjzwmx Sepfx Al Ajwu Clamping jaws

Condition: reconditioned (used), functionality: fully functional, Refurbished sharpening machine for carbide-tipped circular saw blades. Blade diameter up to 600 mm. Hydraulically controlled. Bwjdpfszmhd Ujx Al Aou Equipped with a cooling system, pump, and tank.

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Bwsdoz Ipqpepfx Al Aou Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 18.5 kW (25.15 HP), color: blue, Shredder Type GHZ 600 Factory overhauled, V-rotor Feed width: 300 mm Maximum feed height: 70 mm Working width of rotor: 300 mm Rotor diameter: 252 mm Rotor speed: 600 rpm Cutting system: 14 knives, 40 x 40 mm Bwedpfx Aleymb Ubs Aou Screen perforation: 25 mm Control cabinet: fully wired, incl. 5 m cable Motor output: 18.5 kW Electrical connection: 400 V +/- 5% / 50 Hz Extraction port Ø: 200 mm Overall dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: • PLC electrical control (Moeller / Siemens); star-delta starting • Load-dependent material feed via top-mounted feed roller • Machine frame on anti-vibration rubber mounts • Patented V-rotor with milled knife pockets in the profile • Welded knife carriers and bolted knives with recessed knife screws • Machine prepped for on-site extraction system (extraction port Ø 200 mm)

Condition: excellent (used), Year of construction: 2018, operating hours: 15,854 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 550 mm, feed length Z-axis: 510 mm, workpiece weight (max.): 500 kg, total height: 3,060 mm, total length: 3,075 mm, rotational speed (max.): 12,000 rpm, overall weight: 11,000 kg, spindle nose: SK40, number of slots in tool magazine: 30, chuck outer diameter: 3,325 mm, Equipment: chip conveyor, fume extraction, CNC 5-Axis Machining Center MAZAK Variaxis J600, 2018 You are welcome to inspect the machine in our workshop while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK Variaxis J600 is a powerful vertical 5-axis machining center for the precise and efficient complete machining of complex milling parts. It features a tilting A-axis (-120° to +90°) and a continuously rotating C-axis (±360°), allowing even complex geometries to be completed in a single setup – ideal for general mechanical engineering as well as series and single-part production. The robust design with travels of 850 mm in the X-axis, 550 mm in the Y-axis, and 510 mm in the Z-axis offers ample working space. The rotary table with Ø600 × 500 mm can accommodate workpieces with a maximum diameter of approximately 730 mm and a maximum height of 450 mm – with a maximum table load of 500 kg. The distance from the spindle nose to the table surface can be adjusted between 70 and 580 mm, enabling flexible accommodation of various workpiece geometries. The powerful milling spindle with speeds up to 12,000 rpm and the SK40 tool holder (DIN 69871) ensure high cutting performance and precision. The tool magazine (ATC) with 30 tool positions ensures short non-cutting times and flexible machining processes, even for complex manufacturing tasks. The machine is controlled via the modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. Comprehensive features ensure optimal machining conditions: internal coolant supply (IKZ), automatic tool length measurement, synchronous thread drilling, cylindrical interpolation, and the high-speed functions High Speed, Super High Speed, “G00 slope constant,” a KSS mist extraction system from LNS, a chip conveyor from Mayfran, and a Renishaw measuring system. With a machine weight of approximately 11,000 kg and dimensions of 3,075 × 3,325 × 3,060 mm (L × W × H), the model offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile 5-axis machining center that guarantees high precision, performance, and reliability in industrial production. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. Bwodpszkmaijfx Al Aju You are in the best hands with us – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Bsdjpcf Etopfx Al Ajwu Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Bwjdpfx Alezuwdas Aju

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, number of axes: 4, This 4-axis HUBER River 600 CNC was manufactured in 2017. It features a traverse of 600 x 400 mm in the X and Y directions, and a Z-axis travel of 300 mm. The machine accommodates electrode diameters ranging from 0.3 to 3.0 mm. If you are looking to get high-quality small hole drilling capabilities, consider the HUBER River 600 CNC die-sinking EDM machine we have for sale. Contact us for further details. Bwodpfjz Hwrlex Al Asu - Traverses (X x Y): 600 x 400 mm- Traverse (Z): 300 mm- Electrode Diameter: 0.3 – 3.0 mm

Condition: good (used), Year of construction: 1989, Machine with full equipment Length approx. 9 m Jointing Rip sawing Bwedpjf Ua R Hofx Al Aou Dadoing Rounding Edge profiling Scraping Edge profiling

Condition: ready for operation (used), functionality: fully functional, The Stephan VM.MC.600.20 cutter is designed for high-capacity processing facilities that are looking for an efficient solution for chopping, mixing, and emulsifying food products. It ensures homogeneous and controlled processing, which helps maintain consistent quality with high volumes. As a result, recipes remain reproducible, and manufacturing variations are reduced. Furthermore, the Stephan design guarantees high process stability, even in demanding applications. This cutter integrates into structured industrial lines, as its architecture is designed for continuous operation. In addition, the large-volume tank allows for processing significant batches while maintaining high precision. Moreover, the powerful motor ensures effective cutting action, which improves the final texture of the products. Therefore, productivity increases without compromising quality. Bwjdpox Hyp Sefx Al Aju The stainless steel construction facilitates compliance with hygiene requirements and daily maintenance. As a result, cleaning operations are performed more quickly, and downtime is limited. Furthermore, speed control allows the operation to be adapted to different types of preparations. Consequently, this cutter meets the needs of versatile workshops focused on performance and consistency. Offered as a used unit by Europ’Équipement, the Stephan VM.MC.600.20 cutter is inspected before being put back into service. This ensures that the user has a machine that is ready to be integrated into their production line. Moreover, purchasing used equipment allows for cost control while maintaining a high level of performance. Therefore, this cutter is a relevant choice for securing the industrial process on a large scale. Technical specifications: Tank capacity: 600 L Batch capacity: approximately 150 to 400 kg Dimensions (L × W × H): ≈ 3,200 × 2,400 × 2,800 mm Machine weight: ≈ 3,500 to 4,000 kg Maximum operating temperature: 95 °C Electrical supply: 400 V – three-phase – 50 Hz Motor: high power, multi-speed Year of manufacture: 1994

Condition: used, Manufacturer: Ima Farmomac Model: F370 18VL 8C Year: 1987 frame - Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   Bwedpfx Aezg I Uyol Aou NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be quoted separately. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Bjdpfxjzc Izgs Al Aowu Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 008517, Type of edging: Thin edge, Thick edge, Solid wood Bwedpfx Alsy T Hpfo Aeu Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 8,282 h, load capacity: 14,000 kg, lifting height: 3,550 mm, fuel type: diesel, mast type: telescopic, construction height: 3,485 mm, motor manufacturer: Cummins, gearing type: hydrostat, fork length: 2,400 mm, front tire type: superelastic tires (black), front tire size: 4 x 12.00-20/10.0 neu 20.03.19, rear tire type: superelastic tires (black), rear tire size: 12.00-20 neu 20.03.19, overall weight: 21,340 kg, total height: 3,485 mm, total length: 4,800 mm, total width: 2,550 mm, fuel: diesel, motor model: 142 KW Stage 4I, Equipment: cabin, sideshift, LINDE H 140 D / 600 2013 – Diesel forklifts TECHNICAL DATA Lifting capacity: 14.000 kg Lifting height: 3.550 mm Closed height: 3.485 mm Mast: Standard (2W350) Fork length: 2.400 mm Fork carriage: Terminal West Bwsdpfx Ajz Ap U Hsl Asu Drive: 6-Zyl.-Diesel Engine: Cummins 142 KW Stage 4I Transmission: Hydrostat Tyres: Superelastik SE 4 x 12.00-20/10.0 neu 20.03.19 / 12.00-20 neu 20.03.19 Service weight: 21.340 kg Length: 4.800 mm Width: 2.550 mm Year of manufacture: 2013 Operating hours: 8.282 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Rental truck – Rental price on request. Internal no.: 1102567 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.