Used Korradi Hv 003 for sale (1,322)

Condition: ready for operation (used), Siemens 1FT5052-1AG71-4EG0 3-Permanent Magnet Motor, serial number: E L299 9994 01 003, used, in good condition, 100% functional, delivery as per photos. Bsdswyrfxopfx Am Tjwr

Condition: ready for operation (used), Indramat TRK6-1U-380 / 60-K0 / 003 - TRK6-1U-380/60-K0/003 6-pulse thyristor control amplifier, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bodpfxei Ebqme Am Tewr

Condition: ready for operation (used), Heidenhain ROD 780C, 309863-01, serial number: 7623297 / V5, fully overhauled with 6 months warranty, 100% functional, delivery as per photos Bwodpfx Asy Nqtgom Ter

Condition: ready for operation (used), Heidenhain UM 121 ID: 325 003-02 Inverter - Power Supply Unit SN: 131285638C9 in exchange (Exchange service), professionally completely overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply. Bwodpfx Aex Etf Rsm Ter Attention: You are bidding on a Heidenhain UM 121 inverter (325 003-02, SN: 131285638C9) in exchange (Exchange service), professionally overhauled and tested with 3 months warranty, 100% functional, delivery scope as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €400 incl. VAT will be issued.

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 001/003, used, normal signs of use, 100% functional, scope of delivery as per photos Bwedpfoxaigksx Am Tsr

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Bjdpfsxaigqjx Am Towr

Condition: ready for operation (used), Siemens 1HU3058-0AC01 - Z servo motor, Z = see nameplate, the motor has been completely overhauled by Siemens, SN: E8E88804901003, used, with minor signs of wear, 100% functional, scope of delivery as shown in the photos. Bwjdpsx Dvf Iefx Am Ter

Condition: ready for operation (used), Heidenhain UM 121 . 325 003-02 Serial number: 131285638C9 completely overhauled with 3 months warranty, professionally fully refurbished and tested with 3 months warranty, 100% functional, delivery contents as shown in the photos. Bsdpfox Etghex Am Tjwr

Condition: ready for operation (used), Brinkmann TC 260 / 460 MV + 210 submersible pump, 250 L/min. No. 003, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Bjdpfsi D Hmwjx Am Tjwr

Condition: excellent (used), Granulator Frewitt MGV 003 Ex-protected version Bodpfx Amoq H Rzto Tswr Material stainless steel Power 5 kW stepless mechanical variator mobile, movable on castors Very good condition, straight from production!!!

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003525 - Manufacturer Code: 1-003-65-5353 - Condition: Like new (display item) - Functionality: Fully functional - Compatible machine: - If interested, we offer overhaul service, please contact us. 7KG - 46X39X27 Bwsdpfxeymfgho Am Tjr

Condition: ready for operation (used), Year of construction: 2012, A Matec CNC machining center is offered. Travel X/Y: 3000mm/800mm, horizontal Z travel: 800mm, vertical Z travel: 700mm, B-axis: +/-105°, NC rotary table diameter: 800mm, rapid traverse: 30m/min, feed rate: 30m/min, spindle taper: SK40, max. spindle speed: 12000rpm, spindle power: 30kW, tool magazine: 60, operating hours (04.02.2026): 50106h, control system: Rexroth IndraMotion MTX with Siemens Operate. Machine dimensions X/Y/Z: approx. 7160mm/5400mm/3200mm, weight: approx. 15t. Expected to be available from the end of 2026. Documentation available. Inspection possible by prior arrangement. Bwjdpfx Aezka Nqem Tsr

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm Bwsdpfxeh Hfrnj Am Ter MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Bedpozndurefx Am Tewr Manufacturer: Matec Model: matec-30 HV Year of manufacture: 2004 Condition: good Category ID: 1463 Type ID: 4166 Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.

Condition: new, Torque motor as shown above, item condition: new, original packaging. Manufacturer: Siemens Bwodpfezcgtzox Am Ter Series: SIMOTICS T Product type: Torque motor Type: 1FW6090-0PB15-1JC2 Additional designation: YFED6 133380 05 003 Motor type: Permanent magnet synchronous torque motor Application area: Direct drive for industrial applications and machine tools Condition: New

Condition: used, throat . mm tool adaptor . power requirement . kW total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Milling head BFT Burzoi 0038 PUN 181-187 Bwedpezdu Syefx Am Tor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1998, functionality: fully functional, Anayak FBZ-HV-2500 Bodpfx Ajy Tqb Ejm Tewr Year of manufacture: 1998 Machine no.: M-980610 Control system: Heidenhain TNC 426 X/Y/Z: 2500/900/975

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Bodpoyyzxhefx Am Tjwr Subject to prior sale, changes, and errors!

Condition: new, mileage: 1 km, power: 265 kW (360.30 HP), first registration: 01/2026, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 10,700 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = Bwedjy Uylvepfx Am Ter - Air conditioning - Front refrigerator - Webasto heater = Further Information = Damage: None = Company Information = We are an international company based in Belgium, located near Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and features a spacious parking area used as a display lot. We always have a large selection of buses of all brands, capacities, models, and price ranges in stock. We can find the right touring, school, or city bus tailored to your needs and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing hours for used buses: Mon–Fri: 08:30 – 12:00, 12:30 – 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Bodpfx Ajx U Ay Nsm Tjwr

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Bsdpfod Dc Unsx Am Towr Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Bwodpfxod D D Hlo Am Tjr Height: min. 0.65 m, max. 1.530 m. Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust.

Condition: new, Year of construction: 2024, 1000 kg load capacity, complete set including hand and dual foot control Welding rotary table, height-adjustable Bwedpoid Etiofx Am Tsr with through-hole, 200 mm Plate diameter 900 mm Height, horizontal, min. 0.65 m, max. 1.25 m Height, tilted, min. 0.45 m, max. 0.95 m Speed from 0.01 - 1.1 rpm Tilt up to 135° Hand and foot control with speed display very robust

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, pivoting range: 135 °, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Bwedpfx Amjxt Tgns Tor Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: as good as new (ex-display), 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.6 revolutions per minute Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with the disk in a vertical position, measured to the center: 960 mm ~ 1910 mm Bwsdpfx Aodvn E Ujm Tsr Dimensions with the disk in a horizontal position: 1200 mm to 1900 mm