Stamping and punching machines - travel distance ovr 2500mm for sale
Identified location: (US) (Edit)
|
7
Year: 2013
Working hours machine: 7.793 h (27.02.2020)
Max. punching force approx. 180 kN
Working range: 2500 x 1250 mm
Control: Bosch MTX CMP70
Max. sheet thickness approx.: 6,4 mm
Space required approx.: 6500 x 6000 x 2230 mm
Machine weight approx.: 9.800 kg
Electrical connected load approx.: 18 kVA
Standard configuration
- Stable C-frame for easy access
- Linear magazine for tool stations and clamps
- 18 tool stations and 2 clamps
- Foot switch for clamp closing
- Parts chute 500 x 50... more
|
|
5
DESIGN -CUTTING SYSTEM-
- throat depth 2540 mm
- distance between columns (H-frame) 1300 mm
WORKING RANGE -PUNCHING-
- total force (nominal) 20 to
- sheet thickness max. St37 3.2 mm
WORKING RANGE -NIBBLING-
- sheet thickness max. St37 3.2 mm
ELECTRICAL SPECIFICATIONS
- total power consumption 29 kW
- mains power supply 25 kVA
- mains voltage 400 V
- mains frequency 50 Hz
DIMENSIONS / WEIGHTS
- total weight approx. 11000 kg
HYDRAULIC BRIDGE FRAME
TAX FAN... more
|
|
12
Working area 3085x1650 mm
max. sheet thickness 8 mm
punching force max. 220 kN
traverse speed - Y-axis 60 m/min
Traversing speed - X axis 100 m/min
Travel speed - simultaneous (X and Y) 116 m/min
Traversing speed - C axis 330 rpm
Voltage 400 V
Frequency 50 Hz
Accessories/equipment:
- bulge detection
- SoftPunch
- Opt. thread forming
- Opt. Signing
- Blow-out device Small parts
- Parts slide
- Vibration damped installation
- Automatic switch-off
Hetdsspb
- Repositioning cylinder
Automation:
- She... more
|
|
5
Maximum force (pressing): 300 kN
Working range without position: 1 270 x 2 080 mm
Working range with position: 1 250 x 3 000 mm
Reposition in X axis allows to process sheet metal up to dimension 3 000 x 1 250 mm. Maximum weight of sheet metal is 95 kg. 120 kg when moving only the X axis.
Maximum material thickness (sheet metal): 6.3 mm
Maximum weight of material (sheet metal): 49 kg
Maximum material thickness (flat bar): 10 mm
Maximum weight of material (flat bar): 100 kg
Pressing speed ... more
|
|
6
Trumatic 500R with lift (automation), year of construction 2002, operating hours approx. 71000h, punching force = 220KN, working range 3085x1650mm, control Bosch Trumgraph CC220, Extras = lift for full automation, interface for data transfer, softpunch, multitool drive, thread forming, signing and other functions.
The machine is fully integrated into the production process, available from summer 2020. Up to now, the punching machine has mainly been used to process galvanized thin sheets. The TC5... more
|
|
6
Working hours machine: 60900 h
Bhj0uoef8x
Max. punching force: 220 kN
Working range punching: 2550 x 1280 mm mm
Control: Siemens 840 D
Max. sheet thickness: 8 mm
Length: 7000 mm
Width: 6000 mm
Height: 2400 mm
Machine weight: 13700 kg
Electrical connected load: 29 kVA more
|
|
5
sheet width:-- mm
plate length:-- mm
plate thickness:6,40 mm
x-travel:2525 mm
y-travel:1250 mm
Punching capacity:200 kN
control:FANUC 180 i
positioning speed:X = 83 m/min
positioning speed:Y = 73 m/min
positioning accuracy:+/- 0,1 mm
repeating accuracy:+/- 0,05 mm
tool changing time:0,9 - 1,6 sec.
number of tools:30 Stk.
oil volume:284 l
total power requirement:18,5 kW
weight of the machine ca.:17,0 t
dimensions of the machine ca.:5,8 x 5,3 x 2,5 m
- Number of tools Station A (up to 12.7mm) = ... more
|
|
0
DESIGN -CUTTING SYSTEM-
- throat depth 1500 mm
- distance between columns (H-frame) 6000 mm
WORKING RANGE -PUNCHING-
- stroke rate (max.) 1200 /min
- sheet thickness max. St37 8 mm
- turret/tool-changer: number of positions 20
DIMENSIONS / WEIGHTS
- space requirements -left/right- 5200 mm
- space requirements -front/back- 5200 mm
Bhsr8fcy97
- total height 2200 mm more
|
|
2
Article number: MA1023
Manufacturer: Trumpf
Type: TC 5000R 1600
Year of construction: 11 / 2002
Machine number: A0060A0108
Control: Sienems Sinumerik 840 d
Length [mm]: 7800
Width [mm]: 7000
Height [mm]: 2500
Weight [kg]: 17800
Working hours [h]: 46900
Cukvdb0ng
Travel speed [m/min]: 100
Cutting force [to]: 22
Working range [mm]: 3085 / 1650
Maximum sheet thickness [mm]: 8
Maximum punching diameter [mm]: 76.4
Number of tool stations [PC]: 21 / 4 clamps
Automatically feed: Yes
Tool changer: Yes
A... more
|
|
6
Control system: BOSCH CC 220 TG
Operating hours: 91582 h
Maximum travel length X-axis: 3000 mm
Maximum travel length Y-axis: 1500 mm
Equipment:
18 Tool cartridges
Tool adjuster Multiset
Nvkaf
Tool management Multitool
ToPS 100 a 300
Postprocessor TC 500 - 1600
Blackbox
Thread cutting
Small parts sensor
Signing more
|
|
2
sheet width: 1500 mm
plate length: 3000 mm
plate thickness: 6 mm
pressure: 300 kN
air pressure - required: 300 bar
total power requirement: kW
Dcxyigzcm
weight of the machine ca.: t
This machine is expected to be in production and viewable on site until May 2020.
It is in a very well-maintained condition. more
|
|
6
Control Heidenhain
x-travel 450 mm
y-travel 400 mm
z-travel 320 mm
Bihbhl8ckw
4.800 mm
table load capacity - central/maximum 400 kg
tool adaptor SK40
tool adaptor 14 Stück
weight of the machine ca. 1,9 t more
|
|
6
Working hours machine: 60900 h
Max. punching force: 220 kN
Bhtt8hxvoa
Working range punching: 2550 x 1280 mm mm
Control: Siemens 840 D
Max. sheet thickness: 8 mm
Length: 7000 mm
Width: 6000 mm
Height: 2400 mm
Machine weight: 13700 kg
Electrical connected load: 29 kVA more
|
|
13
|
|
3
|
|
5
Maximum force (pressing): 20 t
Maximum thickness of the sheet metal: 6 mm
Maximum travel length X-axis: 2500 mm
Maximum travel length Y-axis: 1250 mm
Maximum table load (evenly distributed): 120 kg
Maximum punching speed (number of impacts per minute): 1100 1/min
Maximum marking speed (number of impacts per minute): 2800 1/min
Maximum stroke of the upper tool: 40 mm
Maximum feed rate in X-axis: 100 m/min
Maximum feed rate in Y-axis: 75 m/min
Accuracy of programming: -0.1 mm
Machine he... more
|
|
5
|
|
9
CNC punching machine PRIMA POWER E5X
Year of construction: 2011
Table: 2,500 x 5,000 mm
Max workpiece size: 2,500 x 1,250 mm without reduction
Be3alwswoy
Pressure: 17 T na 8 mm
Driven by servo drives
Turret: 250 pieces
Control: CNC PrimaPower more
|
|
0
Working hours machine: 107000 h
Max. punching force: 220 kN
Working range punching: 2550 x 1280 mm mm
Control: Siemens 840 D
Max. sheet thickness: 8 mm
Length: 7000 mm
Width: 6000 mm
Height: 2400 mm
Machine weight: 13700 kg
Electrical connected load: 29 kVA
Bijzhwfp0a more
|
|
15
2000
excellent (used)
Large format sheet metal working center/CNC punching nipple machine
Only about 19,800 operating hours!
With forming and turning function
Manufacturer: FINN POWER (now Prima Power)
Model: F6-25 SB V
Control: Siemens Sinumerik 840 D
Year of construction: 2000
TECHNICAL DATE:
Punching force: 300 kN
Max. material thickness: 8 mm
Number of tool stations: 20 pieces
Tooling system: Thick Turret
Max. tool diameter: 89 mm
Sheet size: Large format 3,000 x 1,500 mm
Small parts flap, max. part size:200 ... more
|
|
5
SG-612307,LD6,TU6L,Buffert,STR6,Service made 19-10-10,22500Hour
You can see the machine runing.
Bh70ouoort more
|
|
Control system: BOSCH PNC
Operating hours: 66000 h
Maximum force (pressing): 180 kN
C7rtqwju3
Maximum thickness of the sheet metal: 6.4 mm
Table length (X): 3070 mm
Table width (Y): 1660 mm
Maximum table load (evenly distributed): 230 kg
Maximum tool diameter: 76.2 mm
Number of tools in the magazine: 22 pcs
Tool change time: 3.1 s
Machine height: 2230 mm
Machine length: 6500 mm
Machine width: 5800 mm
Machine weight: 14.8 t
Availability: March 2020 more
|
|
6
|
|
4
CNC punching machine PULLMAX 730
Begnwadknh
Year of build: 2006 country of origin: Sweden feed axes X/Y: 3 090 / 1 725 mm cutting surface: 3 000 x 1 500 mm pressure: 30 ton Max sheet thickness: 8 mm tools Magazine: 20 PCs
Weight: 15 000 kg control: CNC FANUC 160i-PB more
|
|
1
Punching-nibbling-machine (large size)
SMA-REF-6694
Type: punching and nibbling machines
Manufacturer: Trumpf
Model: Trumatic TC 500 1600
Year: 1994
Control: Bosch CC 220
Working range:
3.000 x 1.500 mm
22 tons
Steel: 8 mm
Bryyqjiq
Stainless: 6 mm
Aluminium: 10 mm
Features:
Multitool
21 positions
incl. tools holders
Condition:
ready for action
under power
only 35.500 working hours
regular service
Location: Southern Germany
Availability: on demand more
|
|
4
Boschert Combicut TWIN 1500 x 3000 CNC Z Rota Index Revo
TRUMPF quick tool change system
Plasma cutting head with Kjellberg 160i plasma source
punching force: 2x 280 kN (28 tons)
+ Suhner thread cutting and drilling head - M16
Travel: x- 3000 mm (repositioning up to 9999 mm)
y- 1550 mm
punching arm throat: 1850 mm
Tool system Trumpf Gr1-3(105mm)
Head 1 punching rotation (Trumpf system up to tool size 3) with
Revotool Indexable
head 2 punching machines Revotool/Trumpf system up to too... more
|
|
7
Plate width 2500 mm
Plate length 1250 mm
plate thickness 8 mm
workpiece weight 150 kg
punching force max. 180 kN
Laser power in watts 2000
Cutting capacity for mild steel 8 mm
Cutting capacity for aluminium 3 mm
Cutting capacity for stainless steel 4 mm
Total power requirement 19 kW
Space requirement approx. 8000x7636x2150 mm
Basic equipment:
- Sturdy C-frame
- Coordinate guidance with integrated linear magazine, 21 places for tools and clamping claws
- 2 clamping claws
- Drives: Maintenance-fre... more
|
|
CNC Punching Press
Operating hours: 70000
Control system:Bosch
Sheet metal size-medium size
Travel distances:
X: 2500 mm
Y: 1250 mm
Punching force: 220 kN
Maximum sheet thickness: 6 mm
Max material thickness :
Steel: 6 mm
Stainless steel: 3 mm
Aluminum: 2 mm
Main electronic connection: 400 V
Power consumption: 17 kVA
Bc92ek03sy
Air pressure: 6 bar
Machine dimensions: 5200 x 5200 x 2200 mm
Machine weight: 11050 kg
Accessories:
Tool Cartridges more
|
|
1
Stamping and punching machine Trumatic 3000R
Producer: Trumpf
YP: 2004
Working surface ... 2500 x 1250mm
Nominal pressing force ... 18t
C7nfmqj
Max. thickness of the cut material ... 6.4mm
L x W x H ... 6900 x 5800 x 2280mm
Machine weight ... 11250kg
The machine is in good condition, possible to test under power. more
|
|
11
2000
unexamined (used)
CNC punching and cutting centre Manufacturing cell
Manufacturer: Finn-Power
Type: SG 6 TRS6SBV Schear-Genius punching machine with right angle shears
Year of construction: 2000
Muuru8
Switch-on hours: approx. 66,600
Control: Sinumerik 840D / Powerlink for Siemens cell control
Working range:X 3061 Y1560
Punching max. 8mm / cutting 5mm (aluminium)
Tool turret: 20, indexing system for CNC turning tool max. 10
Multitool 2
Loading: Sheetmaster with plate lifter
Removal: STS unloading station
Tapping ... more
|
|
1
Manufacturer: TRUMPF
Type: Trumatic TC 500 R - 1600
Year: 2000
Working range: 3.085 mm x 1.650 mm
Control: Bosch Trumagraph CC 220
Max. punching force: 220 kN
Max. sheet thickness: 8 mm
Max. workpiece weight: 150 kg
Max. punching diameter: 76,2 mm
Working hours: appr. 52.600 h
- max. Positioniergeschwindigkeit X-Achse ca.: 90 m/min
- max.Positioniergeschwindigkeit Y-Achse ca.: 60 m/min
- max. Positioniergeschwindigkeit simultan ca.: 108 m/min
- max.Positioniergeschwindigkeit Drehachse ca.: 3... more
|
|
15
1995
ready for operation (used)
RASKIN BEYELER Punching RT 210
- Make : Raskin Swiss
- Type : RT 210 / 12
- Serial : 6011
- YOP : 1994
- X Travel : 1.270
- X Travel override : 2.540
- Y Travel : 1.016
- Punching force : 200 Kn
- Capacity : 6 mm
- Strokes : 620 S/min
- Punching accuracy : 0,10 mm
- Positioning accuracy : 0,02 mm
- Number off grippers
- Revolver stations : 20
- Tool size Ø 35 : 15
- Tool size Ø 60 : 3
- Tool size Ø 100 : 2
- Rotation speed : 40 Rpm
- Siemens 810 CNC Control
- Tab... more
|
|
1
2005
refurbished (used)
Machine Specifications
Work zone:
Work Area (X x Y)
Kqcjqmsv
combined punching / laser processing
- 2500x1550 mm
in case of perforation or laser processing in each case without changing position - 3050x1550 mm
Maximum punching power - 220 kN
The maximum diameter of the punch is 76.2 mm
Max. workpiece weight - 230 kg
Max. sheet thickness:
Aluminum Alloy (N2) - 3 mm
Stainless steel (N2) - 4 mm
Structural steel - 8 mm
Speed:
Maximum positioning speed
X - axis - 90 m / min
Y - axis - 60 m / ... more
|
|
Punch capacity: 20 Ton
Sheet thickness: 6,4 mm steel
Punching area: 2.500 x 1.500 mm
Punch. area with repositioning: 5.000 x 1.500 mm
X-axis travel: 2.552 mm
Y-axis travel: 1.550 mm
Positioning speed: 50 m/min.
Sheet clamps: 3 pcs.
Punch station: 20 positions, incl. 4 auto index stations
Auto index stations: 0° - 360° x 0.01° incr. punch upto Ø 88,9 mm
Foeieqa7m
CNC control: LVD MNC 32000
Including:
- Large variety of tooling
- Safety light guard
- Vibration absorbers
- Documentation & M... more
|
|
7
Stamping and punching machine TC 3000 R - 1600
Producer: TRUMPF
YP: 2004
Worksurface ... 3000 x 1650mm
Dwtpmi
Nominal pressing force ... 18t
Max. Thickness of the material ... 6.4mm
L x W x H ... 7900 x 6300 x 2230mm
Machine weight ... 14850kg
The machine is in good condition, possible to test under power. more
|
|
8
2004
ready for operation (used)
General Data
Cfsabbb
Machine weight 13500 kg
Control Unit
Brand SIEMENS
Model Sinumerik 840D
Main Drive
Punching force 230 kN
Movement
X-Axis Movement 2584 mm
Workpiece
Workpiece drm 1270 mm x 2530 mm
Table
Outer length 1270 mm
Outer width 2530 mm
Tools
Number of station 16
Number of clamps 2
Type of tool holder MT24-8
Additional Equipment
2 tool cabinets and many punching tools for the machine
Safety device: light barrier + fence
This Finn-Power A5 SV Punching Machine was built in Finla... more
|
|
5
Sheet width 2500 mm
Sheet length 1250 mm
Sheet thickness 8 mm
Workpiece weight 150 kg
Punching force max. 180 kN
Laser power in watt 2700
Cutting capacity for structural steel 8 mm
Cutting performance for aluminium 4 mm
3afwrxpc
Cutting performance for stainless steel 6 mm
Total power requirement 21.5 kW
Room requirement approx. 8000x7636x2150 mm
Hours:
- Beam On: 10.536 h
- Laser On: 66,797 h
- Engine hours: 70,424 h more
|
|
1
|
|
Max. Cutting force 220 kN
connected load 29 kVA
Compressed air connection 7-14 bar
working area X+Y without setting back 2500 x 1250 mm
traversing range X -50 - +2550 mm
traversing range Y -7 - 1280 mm
max. sheet thickness 8 mm
active downholder power programmable in steps 4,5-20 kN
Max. Workpiece weight 200 kg
Ibtotvq
max. speed X-Axis 100 m/min
max. speed Y-axis 60 m/min
max. speed C-axis 330 rpm
simultaneous X+Y m/min
stroke sequence punching E-1 1200 1/min
stroke sequence signing 2800 1/min
... more
|
|
2
TechnologyA new reinforced and even more massive frame, double motor in the Y-axisVolume 30% - speed 30% - acceleration 50% With the new STX Plus punching machine, the width and height of the C-frame block has been increased. This means that the punching work will be even more stable and precise in future.
D8ds7xh more
|
|
8
Stamping and punching machine Finn Power A5 SV
Producer: Finn Power
YP: 2002
Table size ... 2500 x 1250mm
Nominal press force ... 23t
Axis X ... 2584mm
Axis Y ... 1317mm
Max. Sheet thickness ... 8mm
L x W x H ... 5400 x 5600 x 2500mm
Machine weight ... 13500kg
On 1.7. 2018 about 31 832 hours under power
2 tool points are damaged.
Bhx7waf7ug
The machine is in good condition, possible to test under power. more
|
|
6
1997
excellent (used)
Used Punchingmachine Motorum Murata 2048 in good working
condition
Bfoqqay0bu
The machine has been properly cleaned and is equipped with
30 Tool Stations
and 3 index stations
Fotos for installation are included in price more
|
|
4
Machine number: 415
max. sheet thickness: 6 mm
Weight: 5 to.
Accessories: fast hydraulics, punching slug extraction Revotool
G7rw90h more
|
|
3
1991
good (used)
Type 3171
SN 1275
force 330 kN
max. sheet thickness 10 mm
lxbxh 6.000x5.500x2.500 mm
M8ywj
many toolst
technische Details auf Anfrage more
|
|
6
- Servoelectric punching machine - Sheet size (X x Y) max 2500 x 1250 (without repositioning) - Punching force 200kN, max material thickness 8mm - NC controlled punch movement with 0.01mm steps - Brush tables for max sheet weight 200kg - 3pcs sheet clamps with pneumatic central locking - automatic programmable clamp setting (PCS) - automatic one clamp moving - upforming system (max forming movement 12mm) - Scrap conveyor SC1 - Turret: * 10pcs Fixed tool stations (1pcs A, 7pcs B, 2pcs C) • 5pcs i... more
|
|
5
Boschert Combicut EL 1250 x 2500 CNC Z Rota IndexQuick tool change system TRUMPFPlasma cutting head with generally overhauled Kjellberg 160i Plasma sourcePunching force: 280 kN (28 tons)Traverse x- 2500 mm (repositioning up to 9999 mm) y- 1250 mmPunching arm unloading:1650 mmTool system Trumpf Gr1-3(105mm)Head 1 Rotation (up to tool size 3)) with Revotool Indexable Head 2 Plasma cutting control Labod 32060 Graphics control / workshop programmable incl. external programming workstation Metalix Ma... more
|
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sample sales contract for used machines in nine languages
Photo gallery: the 10 strongest forklift trucks in the world
Container Numbers Decline by 9 Percent Due to Corona – 15 Facts That Will Surprise You
Photo gallery: The World's 10 biggest excavators
Sponsorship of Michael van Gerwen and TV advertising
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
