Used Krones Krones Solidpac Wrap Around Packer (2006) for sale (4,215)

Year of construction: 2019, condition: new, Wraparound heat-shinkable MIS - 65 1120 - 650 CW BK/T SP 127030 - 12200650026-040 Fgedpfsih R Icox Aggsg Prize per unit carton

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Fgodszp H R Eepfx Aggsg Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2002, machine/vehicle number: M316, Used KRONES filling triblock for sparkling water 25000 BPH - year 2002Technical Specifications & Performance DataThis electronic filling monoblock integrates rinsing, isobaric filling, and capping in a compact rotary platform engineered by Krones. Optimized for PET bottles and carbonated water applications, it delivers high output with excellent process stability and hygiene. The configuration includes an 80-valve filler, 60-gripper rinser and a 15-head Zalkin capper, using neck-handling transfer for precise container control.Production speed: up to 25,000 bphCurrent bottle format: 0.5LContainer material: PETNeck handling: Yes (neck transfer)Neck finish type: AlaskaFiller valves: 80Capper heads: 15 (Zalkin)CO2 management: Yes (isobaric filling for carbonated products)Machine type: RotaryRotation direction: CounterclockwiseMachine pitch: 111 mmMax container height: 320 mmWorking height: 1200 mmManufacturer: KronesAdvanced Automation & Control SystemsThe monoblock features Krones HMI interfaces for streamlined operation and diagnostics. Dedicated panels identified as KFS-3 and KRS-1 provide clear process monitoring, real-time production counters, and guided functions such as production counter reset, error list management, and lamp tests. Operator interaction is simplified via an intuitive keypad with contextual help and status indicators across machine modules.Integrated Krones control panels with HMIReal-time production counters and status visualizationProgrammable function keys for fast operationEmergency-stop circuitry and safeguarded control stationsProduction Line Integration CapabilitiesDesigned for industrial packaging environments, this used bottling line component can operate as part of a complete beverage production layout or as a stand-alone monoblock. Neck-handling transfer ensures stable throughput across light-weight PET formats, while rotary architecture supports quick changeovers between compatible sizes.Inline integration with upstream/downstream conveyorsSuitable for PET bottle handling with neck transferFormat flexibility around 0.5L, with potential for adjacent sizes depending on toolingIdeal for water and carbonated water within beverage productionMachine Condition & Maintenance HistoryThe monoblock was disconnected from regular production approximately three months ago with no issues reported. It is in excellent working order and available for immediate shipment.Operational status: ready for operationTime since last production: ~3 monthsCondition: excellent; fully functional at time of disconnectionOperational Performance & VersatilityEngineered for carbonated water, the isobaric filler with CO2 management ensures accurate fill levels a... Fgodpjyr Hvuefx Aggeg

Condition: used, Year of construction: 1997, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsBottle materials: PETNominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bphMachine rotation: ClockwiseOverall dimensions: L 3.8 m, W 3.2 m, H 2.65 mApprox. weight: 7,500 kgReference: M304Module DetailsFiller carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup.Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers.Advanced Automation & Control SystemsPLC platform: Siemens S7 for process control, diagnostics and integration.Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line.Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention.Production Line Integration CapabilitiesLine compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line.Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included).Downstream equipment: Compatible with conveyors, labellers, packers and palletizers.Handling system: PET neck handling for stable transfer between filler and capper.Machine Condition & Maintenance HistoryStatus: In storage; filler dismantled and stored.Operating readiness: Operating after scheduled service/maintenance.Power: Not connected.Operating hours: Not set.Typical availability: Unit can be prepared for dispatch after service with a standard lead time.Operational Performance & VersatilityProcess benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats.Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits.Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages.Installati... Fgedpfxjyhcgbe Aggsg

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Fodozzz R Djpfx Aggjgg Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel Fjdpszzz Rdjfx Aggsgg - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Year of construction: 2013, Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Fodpfx Aszv Tu Deggjgg - Year of manufacture: mainly 2013 - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Application: filling and packaging of non-returnable glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Filler block electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Filler block compressed air: 6 bar, approx. 450 Nl/min; water: 4 bar, approx. 3.5 m³/h - Filler block weight: approx. 10,500 kg - Integrated foam cleaning; touchscreen HMI on articulated suspension arm Scope of Delivery - Depalletizer | Krones | PRESSANT UNIVERSAL 1A | sweep-off depalletizer for new glass, servo-driven four-sided centering carriage, pallet lifting unit, approx. 5,000 mm discharge table, approx. 48,000 containers/h | 2020 - Rinser-filler-capper block | KOSME | BARIFILL RFC 50-60-10 VKP | stainless steel frame, transparent protective guarding with safety interlocks, process piping, layout drawing available | 2013 - Capper | Zalkin | CA9 360 NG | 10 capping positions, approx. 22,000 bottles/h; capping heads included | 2013 - Cap control | Krones | CHECKMAT - Labelling machine | KHS | INNOKET KL2040/120-30 LM | cold glue, up to 26,000 bottles/h, camera system for label orientation, Siemens S7 control, new HMI touch panel 2019, formats incl. 0.33 L Longneck, Steinie and swing-top and 0.5 L NRW bottles | 2004 - Wrap-around packer | Krones | WRAPAPAC | 45 cartons/min, carton format e.g. 15 x 750 ml glass bottles, Nordson PROBLUE LIBERTY 14 hot-melt unit with automatic fill system | 2003 - Palletizer | GEA Procomac | OPERA | low-level infeed, automatic changeover of pallet patterns and pallet sizes, complete pallet conveying system, pallet magazine, mother pallet handling | 2009 - Stretch wrapper | Robopac - Pallet labelling system | Logopack - Conveyors | KOSME | bottle transport between the machines, line divider and discharge | 2013 Condition Used. The core of the line is installed in an industrial production environment and still under power; the rinser-filler-capper block underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. The labelling machine was in production until January 2025, was overhauled in 2019 and is currently in storage. The line is composed of components from several production sites. Availability From mid-December 2026. Location: Germany.

Condition: refurbished (used), The Benhil 8311 Junior Butter Packer is a flexible and easy to use machine with very little service required. The machine is mainly driven by one motor with a frequency inverter regulating the speed from 0-40 pcs per minute. The low running cost and flexibility on production speeds makes this machine ideal for small and medium butter producers providing value to your butter. The machine was fully refurbished by Benhil in 2004 and again refurbished in 2022 by Dairy Machinery UK . Model: 8311 Junior Usage: Butter filling & wrapping Capacity: Up to 40 packages/min Product: Butter /Lard/ Cheese Product weight: 100- 250 g S.N: DM8311UK Product Dimensions: 110 x 60 x 40 mm Material: Parchment paper or Foil Fsdpfeyvzixex Aggegg Greasing: Semi auto Condition: Good Location: In Stock

Condition: used, machine/vehicle number: LC608, Used Glass bottling line for ciders 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is configured for crown‑capped beverage production and industrial packaging. It combines inspection, rinsing, filling, labeling, packaging, and end-of-line palletizing into a robust second hand solution for beverage production.Depalletizer: Kettner Pressant Universal (1N), 5 layers/minEmpty Bottle Inspector (EBI): Krones Linatronic 731 M2, 700 bottles/minRinsing Machine: CBI JetMatic, 72 heads, 670 bottles/minFilling/Crowning Monoblock: O & H Hansa Ref C2932B 03, 600–660 bottles/min, 80/14 headsBottle Inspector 1: Heuft Spectrum TXBottle Warmer: CBI MCC 2000Labeling Machine: Krones (Renner) Topmatic Type 071, 850 bottles/minBottle Inspector 2: Heuft Spectrum TXShrink Wrapper (Over‑wrapper): SMI SK 800F, 160 packs/minWrap Around Packer: SMI WP 450, 45 cases/minCase Divider: CBIPalletizer: Berchi Dinamatic PTF/2Pallet Wrapper: Robopac Helix HS 30, 30 pallets/hourPallet Coder: Logopak LOGOConveyors + Controls: CBI bottle conveyors and controls; CBI case conveyors; CBI pallet conveyorsCase Scales: John White & Son Cartomat 2Carton Coder: Videojet Excel 100Bottle Dryers/Blowers: Jetair Jet‑2; Sonic 150Chillers: Geoclima 2 x TMA 2A450A EC‑34Container type: Designed for Glass bottle handlingLine speed (bottling): up to 850 bottles/min (limited by downstream configuration)Advanced Automation & Control SystemsThe line integrates centralized controls across depalletizing, inspection, rinsing, filling, labeling, and packaging. Automation-ready subsystems support stable speeds from 160 packs/min on the shrink wrapper to 850 bottles/min on labeling, with efficient changeovers between operations. Safety interlocks, emergency stops, and guarding around rotating and motion systems enhance operator protection and reliable beverage production.Coordinated conveyor logic and accumulation for smooth product flowAutomated inspection (EBI and post‑label checks) for quality assuranceControlled thermal management via bottle warmer for condensation mitigationPallet coding and carton coding integrated for end‑of‑line traceabilityProduction Line Integration CapabilitiesThis used bottling line is engineered for inline operation from depalletizer through pallet wrapper, with modular stations for easy reconfiguration. The conveyor and control system by CBI provides balanced buffering between processes to maintain bottle integrity and consistent throughput. Suitable for a range of crown‑capped glass bottle applications in industrial packaging and beverage production.In... Fsdpoy Ef Ttjfx Aggogg

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Fjdpfx Agsytvyfegjgg Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data - Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab - Model: Octopus 1800 BFTS - Machine Type: Automatic ring pallet wrapper - Year of Manufacture: 2006 - Application: Stretch wrapping of palletized goods - Wrapping System: Horizontal ring wrapping system - Product Transport: Integrated motorized roller conveyor - Electrical Supply: 3 x 400 V - Operating Current: 20 A - Control Interface: Siemens SIMATIC Panel - Conveyor System: Roller conveyor through wrapping area Fgodpfozb Azfex Aggeg - Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly - Location in Line: Palletizing / end-of-line packaging area - Condition: Used, installed in industrial production environment

Condition: good (used), Year of construction: 2008, functionality: fully functional, A weighing system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: Fgjdpfezaw Nusx Aggsg 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. Overall footprint of system (in current setup) - 3.7m long x 2m wide x 3.4m high.

Condition: ready for operation (used), TETRA PAK COMPLETE FILLING LINE, INCLUDES: - TBA/8-1000 SLIM FILLER, VERSION 120, YOM 2009, 27.000 RUNNING HOURS - CAP30 HELICAP23 100V CAP APPLICATOR - TCBP70 WRAP AROUND PACKER, V110 WITH RENOVATED EL. BOX Fgjdpfx Agjxz Eztsgsg - EASY RIDE ACCUMULATOR - CONVEYOURS SYSTEM EXCELLENT CONDITION, STILL RUNNING

Condition: used, functionality: unexamined, Bottled water production line for PET bottles in the following formats: 0.5 L, 1.5 L, and 2.0 L. Line output: approx. 16,000 bph The line includes the following machines: 1) KHS triblock bottling machine, filler type 45-80-10, year 1998 (approx. 20,000 bph), control: S7-200 - KHS bottle washer, Innoclean FR-EM 45 - KHS filler, Innofill EV 80 - ALCOA KUPI 10/540 capper (max. 25,000 bph) Fjdpfx Aswv Trljggegg 2) KRONES Contiroll 745 labeller, year 2000 (16,000 bph), control: S7-300 3) Shrink packer with tunnel – ZVT PSP 032 S, year 1998 4) Bottle liquid level inspection device – METEC Promecon 2000 5) Set of KHS Innoline slat conveyors – several dozen linear metres, including curves and dividers The machines are used, regularly serviced, and require a technical inspection before recommissioning. Currently dismantled and stored in containers, ready for transport. The line is prepared for reassembly – each element is marked with a unique identification number.

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Fgjdpfjyhbmtex Aggsg

Condition: used, Year of construction: 1996, Monobloc filling machine from the renowned manufacturer Krones – model VHK 032 / SV 08. This machine is designed for filling alcoholic beverages (vodka, liqueurs, still drinks) into glass bottles with aluminum ROPP closures. Technical data: Manufacturer: Krones (Germany) Year of production: 1996 Model: VHK 032 / SV 08 Machine type: monobloc (filling + capping) Output: approx. 10,000 bottles/h Fgsdpfsyxv Ihox Aggog Filler: 32 valves (gravity system) Capper: 8 ROPP heads (aluminum, e.g. 28 mm) Technical condition: used machine, condition as shown in the photos, serviced and fully operational until end of production.

Condition: used, Year of construction: 2008, Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  - Capacity: - 60 packs/minute with 2x5 (10 bottles) - 40 packs/minute with 4x5 (20 bottles) - Packing type: Wrap-around carton box - Carton dimensions: - Length: 120 – 300 mm - Width: 210 – 400 mm - Height: 100 – 350 mm - Formation of packs: 2x5 and 4x5 Fodpfx Aowhf S Ueggsgg Scope of Delivery  - Meypack VP 531WA wrap-around packer

Condition: like new (used), Year of construction: 2016, TETRA PAK CARDBOARD PACKER CBP 32 V400 NEW CONDITION, FOR MULTI CARTON FORMATS LAST VERSION 600V YOM 2016 Fgjdpfxoylny Ue Aggsg 5477 RUNNING HOURS ONLY!! NORDSON PROBLUE FLEX UNIT NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Condition: used, Year of construction: 2020, machine/vehicle number: MBI19, Used APSOL casepacking monoblock - year 2020Technical Specifications & Performance DataThe Apsol Automatic Case Packer from 2020 is engineered for reliable secondary packaging in industrial environments. Its robust construction and CE-compliant design ensure consistent performance with low downtime, making it an excellent choice for upgrading a used bottling line or enhancing a second hand industrial packaging setup. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolYear: 2020Production speed: 7–9 boxes per minuteElectrical rating: 400 V AC, 50 Hz, three-phase (3ph+N+GND)Installed power: 26.5 kWFull load current: 49 AShort-circuit rating: 10 kAProtection class: IP54Compliance: CEAdvanced Automation & Control SystemsDesigned for dependable automation, this case packer supports stable, repeatable operations in demanding packaging environments. Electrical architecture provides balanced power distribution and protection to safeguard motors and drives. Operator access and safety interlocks help maintain productivity while ensuring safety.Three-phase electrical supply for industrial dutyCE-compliant design with integrated electrical protectionsIP54 enclosure rating for dust and splash protectionClear operator interfaces for straightforward setup and monitoringProduction Line Integration CapabilitiesThis machine integrates efficiently into beverage production and broader packaging machinery lines. It is suitable for inline installation downstream of fillers, labelers, and inspection systems, handling the transition from primary to secondary packaging with steady throughput. Its configuration supports synchronization with upstream conveyors and downstream case sealing or palletizing equipment.Seamless integration into bottling equipment and packaging machineryCompatible with upstream filling, labeling, and inspection modulesPairs effectively with case sealers, wrap-around packers, and palletizersAppropriate for upgrading a used bottling line or expanding an industrial packaging lineMachine Condition & Maintenance HistoryThe 2020 build and verified electrical data indicate a modern platform suitable for immediate deployment. Offered as a second hand industrial packaging solution, it is presented in ready-for-operation condition to minimize commissioning time and accelerate line ramp-up.Operational Performance & VersatilityWith a capacity of 7–9 boxes per minute, this Apsol case packer delivers a balanced mix of speed and reliability ideal for small to medium throughput applications. The design focuses on stable case handling and consistent packing geometry, supporting quality-focused beverage production and general industrial packaging requirements.Consistent case handling for stable pack formationThroughput suitable for medium-speed production linesEngineere... Fgjdpjy Uvhajfx Aggsg

Condition: excellent (used), Year of construction: 2021, Semi & fully automatic pallet wrapping machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating mode: Semi-automatic & fully automatic Year of manufacture: 2021/2022 Functions and specifications of the LP-SWA-SERIES Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static Maximum load size to safely pass the tower: 67“ x 67” (96“ load diagonal) x 80” H Maximum load size to stay inside the turntable: 46“ W x 46” L (65“ load diagonal) x 80” H Low profile turntable: 65” diameter, laser-cut steel top with all-around deck protection. Maintenance free 54-roller bearing support system. Turntable height 2.813 inches from floor. ANSI No. 50 direct chain drive with chain tensioner. Speed between 3 and 12 rpm with smooth start acceleration Film carriage elevator: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation functions: Fully electric - no pneumatics required Cousins Smart Engineering has developed the A-Arm, an advanced cutting and holding device. It offers significant productivity gains and safety benefits. This technology is only available on Cousins machines. Fgedewb A N Rspfx Aggog This unique method of applying and cutting stretch film offers you the following benefits: - Selectable banding function at the top - Stabilizes the load early in the wrapping cycle - Places the film end at the top of the load instead of the bottom - There is no film clamp on the turntable that can be damaged by dirt or operator error - and Also, no slip rings are required to power the turntable, reducing maintenance requirements - Load placement on the turntable is not critical - No air connections or noisy compressors - New automatic load detection safety feature on first rotation detects unevenly or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions - A-arm fall protection Control functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) Power off - power on - reset switch and operation indicator Automatic wrapping cycle start/pause with just one button Cycle pause for applying the cover sheets Reinforce the wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension control (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height detection sensor for dark or shiny loads Separate control for 1 to 12 turns top and bottom wrapping Selectable parameters for reduced film tension to wrap the top and/or bottom of the load Non-proprietary UL/CSA approved components A - B - C wrapping program selector with the option of entering and saving individual wrapping parameters for each program Product video 1 Product video 2 Product video 3 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, Year of construction: 2005, 6-head packer for 0.5 litre and 0.33 litre glass bottles: Krones Linapac II E35 LT1G Bottle holder: 6 x 20 or 6 x 24 bottles Fodpfexbqldex Aggjgg Additional title: Packing machine for bottle crates Performance: 50000 bottles/h Air consumption: 0,0002 m³ / bottle Power: 24,5 kW Voltage: 230/400 V Frequency: 50 Hz Length: 6160 mm Width: 4120 mm Height: 5033 mm Formats: 0.5 l glass bottle (D = 68.5 mm, H = 270 mm; Ale / Longneck), 0.33 l glass bottle (D = 61 mm, H = 238 mm; Ale / Longneck) Running direction: right -> left Operation / Control: PLC, control cabinet with touch panel Position: free standing Base construction: Square tube frame on dome feet Features: 1 basic machine (lifting mechanism, horizontal linear unit, gripper head carrier, movement axes), 2 gripper head sets (frame with 6 ring gripper heads, 20 (24) ring grippers each, pulling device, manual changing device, insertion frame, vibrator set, folding unit for completeness control, terminal strips for guide plate adjustment), shelf magazine (magazine locations with drive for automatic storage), container transport, container transport, safety device, electrical and pneumatic equipment Periphery: Buffer tables for empty and full boxes Layer patterns: 6 x 20 across, 6 x 24 across, 20 plastic crate (400 x 300 x 300 mm), 24 plastic boxes (400 x 300 x 270 mm),

Condition: used, Year of construction: 2011, Overview This shrink-wrapper was manufactured in 2011 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) and PET bottles (0,5L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data  Fgedpfx Agey Sccregeg - year of manufacture: 2011 - capacity 60/min  - adjusted formats: 1,5L PET (2x(3x2)) and 0,5L PET  - operation: film only  - application: water, beer, CSD - condition: very good, still connected  Additional information - conveyor for packages available

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Complete craft beer bottling line: Cime Careddu GOLD DPS 6/6/1 rotary triblock (rinser – isobaric filler with double pre-evacuation – crown capper) and matching Compatta self-adhesive labeler. Both manufactured in 2018, installed in 2019 by Coenco (official Cime Careddu agent for the Benelux), professionally maintained, with low operating hours. Available immediately from a brewery in Dokkum, the Netherlands, due to production shutdown. 1. Triblock – Cime Careddu GOLD DPS 6/6/1 CROWN Type: rotary triblock (rinser – isobaric filler – crown capper) in stainless steel Year of manufacture: 2018 (serial no. 708) Rinser: 6 grippers, water rinse Filler: 6 isobaric (counter-pressure) filling valves with double pre-evacuation (DPS) and CO₂ pressurization for low dissolved oxygen Capper: 1 head for 26 mm crown caps, with crown feeder Capacity: approx. 1,000–1,200 bottles/hour (33 cl) Bottle formats included: [e.g. 33 cl longneck Ø 60 mm, 33 cl Steinie Ø 69 mm, 75 cl Ø 85 mm – fill in] CIP: cleaning-in-place connections for internal and external sterilization Electrical: 400 V / 50 Hz / 3-phase + N Operating hours: approx. [xxx] hours (approx. [xxx,xxx] bottles filled) CE certified, safety guarding fitted 2. Labeler – Cime Careddu / ENOS Compatta Type: linear self-adhesive labeling machine, one label station (front or wrap-around label) Year of manufacture: 2018 (serial no. 720) Fedpfx Aezza Rijggjgg Capacity: up to approx. 1,800 bottles/hour Electrical: 400 V / 50 Hz / 3-phase + N Manual station adjustment, suitable for round bottles from 25 to 75 cl

Condition: used, Year of construction: 2016, Overview  This rotary cold-glue labelling machine was manufactured in 2016 by Germany KRONES. The machine is designed for high-speed beverage bottling lines and is equipped with three cold-glue labelling aggregates for front, back and neck labels. The machine is used and still under power. Fgedjzhaadopfx Aggsg Technical data - Capacity: approx. 33,000 bottles/hour - Formats: - 0.75 GDB DN2 - 0.5 L longneck beer - 0.33 L longneck - 0.25 L individual bottle - Application: Cold-glue labelling of beverage bottles - Configuration: 2.400-40-188.5, 3 cold-glue labelling aggregates - Label positions: Front, back, neck - Integrated systems: Domino coding system, Krones Checkmat 731 inspection system, Plasmatreat for seal label

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 50062, Siat WR100-M mobile robot wrapping pallets vertically, H2100, serial 50062, serial number FAMROBOTWR100, year 2006, with battery charger. This robot is in good working condition Equipped with key and 2 new batteries, new inductive side sensor. Weight: 350 kg Dimensions (L x W x H) 3.30 x 1.50 x 2.95 M Rotary plate 1500 MM DIAMETER Rotation 10 RPM DEPENDING THE SELECTED PROGRAM Reel MAX. 500 MM WIDE X 300 MM DIAMETER Film MAX. 1800 MM HIGH Pallet weight MAX. 2000 KG Pallet dimensions MAX 1000 X 1200 MM Power 1 KW MAST Fjdpfxsw E Epbs Aggsgg Wrapping height up to: 2800 mm. PS HEAD Pre stretch 250% Film stretching from 1 m to 3.5 m. Stretching occurs in the head, not on the load photocell. NUMBER OF PALLETS / 1 BATTERY CHARGING up to 120 Euro pallets: H 1800 mm. WRAPPING FUNCTIONS: 4 programs programmable by the operator: Up-down cycle; Up-only cycle; Down-only cycle (you can set the starting height of the cycle); Cycle for attaching a foil hood. Adjustable number of wraps at the bottom of the pallet number of wraps at the middle of the pallet; Adjustable number of wraps at the top of the pallet; Adjustable wrapping speed up to a maximum of 83 m/min; Adjustable speed of the foil trolley rising and falling; Adjustable tension force via an electro-magnetic brake; Pre stretch 150, 200, 250% Video: Price Euro 3.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana