Monoblock filling machine for alcoholic beverages

Krones VHK 032 / SV 08

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Pgsdsh E Sghepfx Abueu Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped Psdpoycvaqefx Abujgu - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Pedpfx Abow Ahg Rjusgu Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: good (used), 50-position filler with crown cap closure. Used in a winery for filling wine into 1L glass bottles Pedpevq Suiefx Abusgu

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, We offer the filler Veral 60, Producer Nate Chotebor. The machine is prepared for filling of the beer. Machine after general repair of all elements - filler, closer and pump. The machine is prepared for next types of bottles - 500 ,660, 750 and 1000 ml bottle. Filling capacity 20 000 bph of 500ml bottle. Pgsdpfx Abotrv E Ueueu

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. Pgedpfxozx Enne Abueu The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: good (used), Year of construction: 1997, Also available CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis motorized CNC lathe is a robust and precise medium-sized inclined bed numerical control lathe, turning length approximately 700mm, bar passage 42m, automatic turret with 12 positions with motorized tools, FANUC 18-T CNC with color LCD and RS232 serial interface for data transfer 5″ ASA spindle maximum revolutions: 4,200 rpm Pgodpfx Absvtrc Ssusu continuous C-axis 20HP spindle power X-axis travel: 172mm Z-axis travel: 575mm machine weight 4,000 Kg. Complete with 210mm AUTOBLOCK hydraulic chuck, tool presetting, programmable tailstock, 2 motorized tool holders (1 axial and 1 radial), chip evacuator, set of fixed and manual tool holders and backup disk; Year of construction 1997; machine compliant with “CE” standards, in excellent condition.

Condition: used, Year of construction: 2013, KEG filler, make Framax, type: F-2-Ecodraft, 2 filling stations, made of stainless steel, control cabinet with touch panel, built on base frame, built in 2013; Poderxuh Sspfx Abujgu overall dimensions L: 850 mm x W: 1100 mm x H: 2000 mm

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (L x W x H) approx. 1,800 x 1,500 x 2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Working disc speed 45/70/90/140 rpm Working power, main drive 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operating panel Full-fledged lapping machine, conventional control Pgedpfx Aeh Invrobuou

Condition: new, Year of construction: 2025, Laser power: 6000W/12000W/20000W Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Psdpfeg Du Aqsx Abujgu Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.