Used Matra Mf 6A for sale (1,921)

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Dcodpfoyaqr Aox Ac Njg Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Year of construction: 2004, condition: used, High - band saw Moehringer / Braun Canali Dedpodfcv Iofx Ac Necg Type multi-line TB 1250 MF-20 Roll diameter 1250 mm Roll width 150 mm Blade speed: 28-50 m/s Connected load: ca. 45kW Feed rollers 2 x 4 Height 200 mm Cutting height lower edge pressure Guide 400 mm and higher Cutting width 250 mm left of the blade and 250 mm right of the saw blade with medium cutting device complete technical documentation Follow original photos

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Dcedpfoyvmq Iex Ac Njg Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: used, Year of construction: 2008, Technical details: Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW dimensions L x W x H: 1,05 x 1,28 x 2,0 m Dry separator with fan is sold as is. Dcedpfxjyt I Axs Ac Njg Built-in sheet steel construction Filter surface VARIO T 1.5 f=50 Hz Filter: 6 filter elements; dust extraction via container Ø 300 x H: 380mm Fan: Intake opening Ø 250 m; connected load 380V Exhaust air opening via ceiling External operation (was integrated in a laser cutting system Trumpf) *

Condition: used, Year of construction: 2023, operating hours: 237 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tyres (front): 540/65 R28, Tyres (rear): 650/65 R38, Operating hours: 237, First registration: 19.12.2024 Basic equipment / technical data ENGINE Djdpew A Hgpofx Ac Necg Max. power 121/165 kW/hp (ISO 14396) Max. power with power management 136/185 kW/hp Max. torque 790 Nm, with power management 800 Nm Rated power 134 kW (ISO 14396) Max. PTO power 103/140 kW/hp (OECD) 4 cylinders, 4.9 l AGCO Power - 49 LFNT-D5 Exhaust aftertreatment with DOC - diesel oxidation catalyst, 3rd generation SCR & diesel particulate filter Emission standard: Stage V Electronic engine control with Vistronic fan management Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare radiator package 280 litre fuel tank

Condition: used, functionality: fully functional, travel distance X-axis: 6,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 10 rpm, table width: 1,000 mm, table length: 8,000 mm, CNC Bed Milling Machine Zayer MF3 8000 CNC For sale: bed milling machine from the well-known manufacturer Zayer, model MF3 8000 CNC. The machine is designed for machining large and long workpieces, ensuring high precision and rigidity. Technical specifications: Dcjdpfx Aoyw N Rajc Njg Travels X/Y/Z: 6300 x 1100 x 1500 mm Table size: 8000 x 1000 mm Spindle speed: 10 – 1800 rpm Spindle power: 18.5 kW Spindle taper: ISO 50 CNC control: Heidenhain TNC 320 Universal milling head: 360° swivelling Machine in very good technical condition, ready for operation.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, For sale is a DSS / Tetra Pak Ultrafiltration/Microfiltration System, Model UF/MF 6338 (Pilot) from 2010. The installation is in excellent condition, fully operational, and ideal for pilot trials, product development, and replicating industrial process conditions on a smaller scale. Manufacturer: DSS / Tetra Pak Model: UF/MF 6338 (Pilot) Year: 2010 *Feed capacity: up to 3,550 l/h Retentate flow: approx. 2,200 kg/h Permeate flow: approx. 1,000 kg/h Number of filters: 6 pcs. Includes Alfa Laval heat exchanger, 3 sections Feed pump: 5.5 kW, Alfa Laval LKH 25 Booster pump: 18.5 kW, Alfa Laval LKH 50 Condition: very good, fully functional Dsdpfxjyka Ste Ac Nocg * The technical specifications listed are for processing cream into mascarpone. The UF/MF 6338 pilot plant impresses with its robust design, reliable Alfa Laval components, and a practical process configuration. With six filter elements and an integrated three-section Alfa Laval heat exchanger, it enables stable, temperature-controlled filtration—perfect for applications requiring reproducible results and flexible parameter adjustment. This system is particularly suitable for dairies and food producers seeking to test or optimize filtration processes (UF/MF) or develop new products—utilising technology from the DSS/Tetra Pak sector.

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Dcodpfjg U A Uzjx Ac Nog Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz - Welding controller TE750 or TE760 - Spotter for single-sided spot welds - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new

Condition: excellent (used), Year of construction: 2018, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,800 mm, Table 1,500 x 1,500 mm X 2,000 mm Y 1,600 mm Z 1,800 mm Dsdpfxexyic So Ac Necg B-axis, A-axis swiveling +/- 19 degrees Machine features full enclosure Chip conveyor and high-pressure coolant system Tool holder SK 50 Control Heidenhain iTNC 640 Table load capacity 20 tons Spindle speeds up to 4,000 rpm Rapid traverse 20 m/min Tool changer with 40 stations

Year of construction: 2009, condition: used, functionality: fully functional, Used Frewitt Model MF3 stainless steel oscillation granulator. - Manufacturer: FREWITT (Switzerland) Dcjdpfxeyzhm Uo Ac Nog - Model: DM - MF 3 - Drive: 1,1 kW, mechanical varispeed gerbox with output from 48-257 rpm - Protection: Atex rated, Dust group: inside II 1D, outside II 2D, IP65, T3=200 deg. C. - Others: Mounted on stainless steel table.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: K974.016, Plasma spraying system Dcsdpfeym Ay Esx Ac Neg - Comfort control panel - Gas regulation cabinet for plasma - Power source PPC 2002 NG - JamBox - Powder feeder PF 2/2 - Plasma torch - Plasma hose and cable set for 9MB - Sigma 67-2K water recooler with 2 cooling circuits for separate use of a 9MB and TopGun torch - Control cabinet - TS modem adapter

Condition: excellent (used), IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm Dcsdpjytff Dofx Ac Nog VERTICAL TRAVEL: 1000 mm ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, Exeron S 310 MF year of manufacture: 2011 generator hours: 26,882 Do Utjv Nkrdeyfqhekh control: exowin 20 x, y, z 310 x 270 x 270 mm C-axis 3R spindle interface Dcjdpfxsyh Ei Nj Ac Neg Erowa chuck on bed with magnetic plate generator 64 A C-box for hard metal and PKD 20-fold tool changer fire extinguishing system chiller Erowa aluminum clamping plate documentation machine is connected for inspection

Condition: new, Magnetizer Magnet Physics MF-RI8 Item condition: New without OVP The item comes from a company liquidation from the automotive industry and was temporarily stored in paternosters. Storage traces possible. Dcsdpfxoivdl Te Ac Nsg R12B1_EK Financing through our bank is also possible. komplett-konzept.leasingo.de Further magnetizing devices - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade Dcodpfsqn A Rgjx Ac Njg

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW Dcsdpfxeqn A Rno Ac Neg

Condition: excellent (used), Tap Make Reishauer Type MF 40 x 2.5 L Dsdjdx Ugyepfx Ac Necg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 61,000 h, machine/vehicle number: 04800000401, Sales only within EU Please give us your quote for the machine ----- Dedpfx Ajhv H Hyjc Necg Without packaging; Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.

Condition: reconditioned (used), Year of construction: 2003, used machining center Brand: KONDIA Model: ZM 99 MF (Direct Engine) Power: 20KW Year 2003 Weight: 5,700kg Dcodpfx Ajhymdxsc Nsg CNC: GE FANUC Series 18i-MB Dispone de 4rto EJE controlado por el cnc marca TSUDAKOMA modelo RN-200B. Table dimensions: 1200x400mm X, Y, Z paths: 600x400x510mm Rapid advance on X-Y axes: 36,000mm/min. Rapid advance on Z axis: 30,000mm/min. Work advance: 5,000mm/min Head: ISO40 Speed range: 15,000rpm Maximum distance spindle to table: 660mm Automatic tool changer: Number of tools: 20 Selection type: RANDOM Maximum tool length: 225mm Maximum tool weight: 6kg. Precision: - Positioning accuracy: 0.01mm - Accuracy repeatability: 0.005mm - Resolution: 0.001mm It has a chip extractor. Includes gag. Includes ISO 40 tools.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, spindle speed (max.): 4,200 rpm, table load: 35,000 kg, CNC SELCA 4040 DH Maximum drilling depth in single cycle, V axis: 1,500 mm Column, longitudinal travel X axis: 3,250 mm Vertical travel Y axis: 1,500 mm Drilling slide, workpiece support movement W axis: 500 mm Maximum workpiece height: 2,400 mm Clamping table and workpiece approach movement U axis: 1,000 mm Controlled radial resolution, B axis: 360,000 divisions/rev Clamping table, rotating surface size: 1,600 x 1,800 mm Clamping table, max load with rotating workpiece: 20,000 kg Standard T-slot size: 22 mm Minimum–maximum solid drilling diameter: 5 – 50 mm Rapid feed rate, adjustable max speed: 8,000 mm/min Drilling spindle rotation speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 15 kW Gun drill tool holders: Shank for drill Ø < 6 mm: Ø 10 x 40 mm Shank for drill 6 mm < Ø < 25 mm: Ø 25 x 70 mm Shank for drill Ø > 25 mm: Ø 40 x 70 mm Dimensions and weights Width x Length x Height MF 1500 BB: 5,900 x 7,600 x 3,850 mm Total weight: 42,000 kg Oil tank capacity: 600 – 1,200 liters WORK SLIDE TILTING Minimum / maximum vertical inclination – A axis: +20° / -20° Continuous controlled radial resolution: 0.001° MILLING HEAD – ISO 50 spindle connection Max horizontal working stroke – Z + W axes: 1,000 mm Column longitudinal travel – X axis: 3,250 mm Drilling slide vertical travel – Y axis: 1,500 mm Spindle rotation speed, adjustable max: 2,500 rpm Djdpfx Aeyymdisc Njcg Spindle power (S1 duty): 17 kW Maximum spindle torque: 680 Nm ROTO-TRANSLATING CLAMPING TABLE Max clamping surface: 2,000 x 2,000 mm Max horizontal travel – U axis: 1,000 mm Continuous controlled radial resolution: 0.001° Max rotating workpiece load: 35,000 kg Standard T-slot size: 22 mm Machine complete with: • Remote electronic handwheel • ISO 50 tool changer magazine with 10 positions • Many tools and working equipment • Rack with various drills • User manual, maintenance manual, and CE conformity declaration

Condition: good (used), Masterflex MF 07525-40 L/S Digital miniflex pump Peristaltic pump *New price € 3,308 This compact, stackable pump has a robust ABS housing that is easy to wipe down and keep clean. The Miniflex pump head has a large occlusion angle that prevents fluid backflow up to the nominal pressure of the tubing. Self-lubricating thermoplastic polyester rollers are low friction and durable for smooth operation and long life. Series L/S Type L/S Miniflex Pump head not interchangeable Number of mountable heads 1 Channels 2 Rollers 3 Dodpstt Dxdefx Ac Necg Delivery volume min 0.008 ml/min up to max 324 ml/min Tube ID from 0.8 mm up to 3.2 mm Can be used as a dosing pump yes Can be calibrated yes Analog interface (D-Sub 25-pin w) Operation Membrane keypad with LCD display Housing material ABS plastic, aluminum and vinyl Protection class IP 33 Motor brushless motor Motor speed min 0.1 rpm up to max 300 rpm Change of direction of rotation Yes Open-head sensor Yes Cloud Connected No Anti-Drip Yes Dimensions: 238 × 140 × 157 mm (L x W x H) Condition: used You can find more laboratory devices - new and used - in our store! International shipping costs on request!

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Dcodpfxob A Hzro Ac Nsg -Type: MF 04 520-HN -Price: per piece -Quantity: 4 available -Weight: 0.2 kg/piece

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: "Fumatech" MF 1100 Dcodpoqwprgsfx Ac Njg -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine, melting unit with granulate container Dedpfxeb Uhk Uo Ac Necg - Manufacturer: HOMAG - Scope of delivery: see pictures -electrically heated -Number: 1x glue basin available - With the premelting device, you always have enough hot melt adhesive available -Dimensions: 480/220 / H200 mm -Weight: 30 kg / piece

Condition: used, Gas and air filters, air filters -Manufacturer: Maxitrol Dcedpfjd D Iq Djx Ac Nog -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg