Used Oerlikon-Klingelnberg Gear Testing Machine for sale (75,064)

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Bwodpfszii Awsx Am Ter Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Zwick Type: BT2-FZ0.5TS.D16 500 N + Xforce P 500N Materials Testing Machine Test force in tension/compression: 500 N Overall height, without head traverse: 789 mm Overall width: 411 mm Overall depth: 622 mm Footprint: Bwedpeziixlsfx Am Tsr Net standing area: 0.008 m² Load frame base area: 0.196 m² Specific floor load: Based on typical equipment: 0.85 kg/cm² With 50% safety margin: 1.28 kg/cm² Ceiling load: Based on typical equipment: 97 kN/cm² With 50% safety margin: 146 kN/cm² Working space depth: 105 mm Working space height with upper mounting bracket: Minimum height: 235 mm Maximum height: 565 mm Working space height with lower mounting bracket: Minimum height: 90 mm Maximum height: 420 mm Weight: approx. 78 kg with extras Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) We are happy to answer further questions by phone.

Condition: used, Zwick / Roell Type: LTM10 Maximum testing frequency: 100 Hz, depending on the amplitude Bwjdpfx Aezh D R Hsm Tjr Dynamic testing force in tension/compression: 10 kN Static testing force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeatability accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Testing space height without force sensor: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: according to maintenance instructions, partially performed by Zwick/Roell Accessories: Screw chucks, software (TestXpert research) Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1980, machine/vehicle number: 622336, Offer 22681 Bedpfx Aozp E Ucsm Tewr Technical Data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mounting: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm - Table with 2 T-slots - Table dimensions: 400 x 450 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 850 mm - Weight: approx. 300 kg - Including: - Drill chuck - 10 HSS drill bits, 8 – 20 mm

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine Bsdov Dtmmepfx Am Tswr -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5-K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Accessories: Includes extensive accessories (see photos) -Not included: Template for helical gearing -Machine dimensions: 2300/1460/H1870 mm -Accessory dimensions: Pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: good (used), Year of construction: 1965, Measuring machine, manual Erichsen depression testing machine, depression testing machine, sheet metal testing machine, manual paint testing machine -Manufacturer: Klingenthal -Type: 05 Bsdow H N Dlspfx Am Tewr -Manual paint testing machine: Erichsen pitting tester -Maximum sheet thickness: 2.0 mm -Accessories: see photos -Test ball: Ø 20 mm -Die: Ø 27 mm -Dimensions: 460/360/H335 mm -Weight: 20.5 kg

Year of construction: 1991, condition: good (used), Ref. -No.: 10656 Manufacturer: PFAUTER Type: PE 150 Year of construction: 1991 Type of control: CNC Control: Sinumerik 840 Storage location: Halberstadt Country of origin: Germany Bsdjzkpx Ujpfx Am Tewr Turning Speeds: 150 - 600 RPM Tool Taper: SK 40 Machine length: 4700 mm Machine width: 3600 mm Machine Height: 2800 mm Weight: 8 t Workpiece Diameter: 150 mm Maximum tooth width.: 150 - 200 mm Table diameter: 160 mm Table drilling: 63 mm Max. cutter diameter: 130 mm Max. cutter length: 220 mm swivel angle: +/- 45° Further information: - The machine has been completely converted to Siemens 840D, including the motors and control cabinet. - The milling head was completely overhauled by Pfauter in 2013. - The low-voltage system and magazine conveyor are included. - It is equipped with a deburring station. The machine can be viewed while powered on by prior arrangement.

Condition: defective spare-parts repository (used), functionality: not functional, workpiece diameter (max.): 400 mm, According to the electrician, the main motor needs to be rewound. The carbon brushes should be replaced, and two coils in the control cabinet need to be replaced as well. Bodpezp R Tkjfx Am Tswr Up until the motor failure, the machine was fully operational.

Condition: good (used), max. module 2 hobbing length 135 mm total power requirement 2,2 kW Bjdpjzkvuvsfx Am Towr weight of the machine ca. 1420 kg dimensions of the machine ca. 2,00 x 1,60 x 1,43 m --> Technical specifications Maximum milling diameter: Ø 150 mm --> Maximum milling length: 135 mm --> Maximum module: 2 --> Spindle bore: Ø 24 mm --> Spindle mount: MK-4 --> Cutter speeds: 140–1120 rpm --> Automatic feeds Equipment and accessories: Coolant system, cutters, change gears, operating instructions

Condition: excellent (used), Haida Type: HD-B604-S Bwodpfx Aszgr Eiem Tor Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Chuck range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2004, functionality: fully functional, CNC gear hobbing machine Control: Siemens 840 D Power Line Technical data: Max. workpiece diameter: 150 mm Table diameter: 145 mm Max. table speed: 800 rpm Distance between centers: 10 – 200 mm Max. axial travel: 250 mm Swivel angle of milling head: +/- 45° Max. tailstock travel: 300 mm Max. rapid traverse rate: 17,000 mm/min Drive power of milling head: 19 kW Max. module: 3 mm Max. speed of milling spindle / tool speed: 4,500 rpm Max. diameter of hobbing cutter: 80 mm Max. length of hobbing cutter: 200 mm Dimensions approx.: 5.5 x 3.7 x 3.1 m Bwodpfxjzkwvno Am Tsr Weight approx.: 9,500 kg Equipment: Chip conveyor Oil mist extraction / oil extraction Oil cooler Steady rest with lowering device and vertical adjustment Rotary ring loader with two workpiece grippers Loading belt system for automatic feeding 5 milling arbors / hobbing cutter holders: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Other: Video recordings via WhatsApp

Condition: used, Year of construction: 1991, functionality: fully functional, total length: 4,920 mm, total height: 2,500 mm, total width: 2,855 mm, workpiece diameter (max.): 200 mm, For sale is a Mikron A35 CNC gear hobbing machine in well-maintained and operational condition. The machine impresses with its high precision, reliability, and productivity, and is ideally suited for the economical production of gears and toothed components. Technical data: Bwedpfx Aozphw Tem Tor Manufacturer: Mikron Model: A35 CNC Machining process: CNC gear hobbing Max. workpiece diameter: 200 mm Max. module: 3.0 / 4.5 Max. workpiece length: 400 mm Cutter speed: up to 1,500 rpm The technical specifications correspond to the standard specifications of the Mikron A35 CNC. Condition: Fully functional Regularly maintained Inspection possible under power after prior arrangement Available immediately or by agreement.

Condition: excellent (used), functionality: fully functional, I would be happy to add technical data to the document for you. Bedpfezmqalex Am Tswr Gear Hobbing Machine conventional Country of origin: Germany Technical specifications Details max. wheel diameter 600 mm gear width 250 mm max. module 8 total power requirement 2.2 kW machine weight approx. 2000 kg machine dimensions approx. 2500 x 1600 x 1900 mm cutter diameter max. 250 - 285 mm clamping table diameter 460 mm table hole 70 mm accessories: various Control unit conventional Additional information Documents I would be happy to add technical data to the document for you. I would be happy to add technical data to the document for you. Gear Hobbing Machine

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7 t L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 _____ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12-150 Feed range, tooth depth 0.01 - 0.063 mm/stroke Feed range, rotary feed by Tool-Ø 125 0.125 - 3.15 mm/stroke Spindle drive, approx. 19 kW Total electrical load, approx. 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special Features * Hydrostatic straight guides with separate hydraulic aggregate. Bwedjt Hww Djpfx Am Tor * Built-in raiser plate approx. 100 mm to increase height of shaper head. * Hydraulic universal workpiece clamping device built by RINGSPANN to clamp ring shaped workpieces on the inner diameter with various inserts to accommodate different workpiece diameters. * Stepless Regulation of number of strokes for improving roughing and finishing process * Automatic changeover of number of strokes, and automatic feed changeover for roughing and finishing work in up to 3 cuts. * Automatic and motor-driven fixing of shaping stroke in the upper position after work is finished. * Separate switch and control cabinet. Two-hand start. * Coolant equipment with magnetic chip conveyor and chip collection container. * Various change gears, shaping tool holders, etc. Condition : Satisfactory to Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines on stock. Please let us know what you need.

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Bodet Hwqqjpfx Am Tjwr Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm Bwjdet Hwruspfx Am Tjr distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm Bodpst Hwvmofx Am Towr honing length max. 500 mm max. module 5 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Bodpfxjt Hw D Rj Am Tswr Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 min. module 4 total power requirement 15 kW Bwjdpjt Hw Hxofx Am Tjr weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Bwjdpfx Amet Hw R De Tor Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts. Bwsdpfx Ajt Hwniem Tor

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Bwedpfxst Hwxhe Am Ter Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Bodpst Hwzpofx Am Towr Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1973, max. wheel diameter 400 mm gear width 75 mm total power requirement 25 kW weight of the machine ca. 7000 kg Bedpfx Amst Hw Hle Tjwr

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t Bwedpfxst Hwu Aj Am Tor dimensions of the machine ca. m