Used Pastry Filling Machine for sale (66,918)

Condition: good (used), Rarely available, Toyo Jidoki pouch machine direct from recently closed manufacturer of sauces, stocks and soups. Was filling these products into stand up retortable pouches. Bought new in 2007. Knodoqudivspfx Anxsb

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Knjdpfx Aowztmtsnxob

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. Ksdpfszvmy Hex Anxsnb NOTES – BUYER TO REMOVE FROM SITE.

Year of construction: 1998, condition: used, Serial number: 65170/50671 Capacity 9000 p/h Previously produced 1500 ml Packages capacity 500-1500 ml Weight approximately 8920 kg Hours 33 448 h LxWxH 7300x3100x2800 Note! Outgoing pipework not included Online auction due to the full stop closure of Swedish dairy plant Emåmejeriet, manufacturer of butter cream and milk products (e.g. ALFA-LAVAL separators, RANNIE, TETRA PAK homogenizers, TETRA REX filling lines, MULTIVAC R5200 vacuum packing ELOPAK, many s/s storage tanks WEDHOLMS, logistics, carts, racks, many spare parts etc.) at Hultsfred in Sweden. The online auction opens Monday 14 September and closes Thursday 22 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 20 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices. Ksdsz Au T Ujpfx Anxsnb

Condition: like new (used), Year of construction: 2025, operating hours: 280 h, functionality: fully functional, film width: 400 mm, number of blades: 2, product height (min.): 60 mm, product height (max.): 150 mm, product length (min.): 40 mm, product length (max.): 150 mm, filling weight (min.): 2 g, filling weight (max.): 100 g, Pillow-pack filling and sealing machine. Suitable for packaging sauces, creams, mayonnaise, and salad dressings. The machine produces 3- or 4-side sealed sachets (ranging from 2g to 100g) from flat film, with an output of 40–60 units per minute. It is suitable for use in the food, cosmetic, and non-food industries. A 300-liter, 15 kW homogenizer can be connected as an optional accessory. Knodpfxez Dgdfs Anxob

Condition: refurbished (used), Year of construction: 2021, Project-related overhaul completed in 2020–2021. Originally built in 1991 and fully refurbished by DL Packaging in 2021. Now available again! Since the refurbishment, the machine has operated for only approx. 150 hours – available immediately. Knsdpfxox Dapwj Anxeb Included: FS 110 forming set for pillow bags, 110 mm width FS 180 forming set for pillow bags, 180 mm width Markem X65 TTO printer The machine can produce both pillow bags and block-bottom bags. Includes SDX, printer, and forming sets. Capacity: 50–80 bags/min, depending on bag format, film thickness, filling product, dosing system, and synchronization. Delivery time: On request. If you are interested in this machine, it will be modernized by DL Packaging according to your product and specific requirements.

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) * Washing Time: Adjustable from 40 to 120 seconds * Bottle Size: Standard 18.9 L (5-gallon) bottles Kedpfszb Rmvex Anxenb * Power Supply: 400 V, 50 Hz * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg * Minimum Installation Area: 7 m × 3 m The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen Kodpfx Ajwnriajnxjnb

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Kodjyw H Rkopfx Anxjnb Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: like new (used), functionality: fully functional, warranty duration: 12 months, filling weight (min.): 5 g, filling weight (max.): 5,000 g, Introducing the brand-new DLPACK 260 Servo! Built with stainless steel and equipped with Siemens controls, this machine delivers exceptional performance for a wide range of applications, from powders and granules to food and non-food products. The first 20 machines have already been built and commissioned, achieving an output of up to 105 bags per minute. With a dosing range of 5g to 5000g and bag sizes from 60–260 mm (W) × 80–500 mm (L), it is designed to handle almost any packaging requirement. Key Features: Brand: DLPACK Model: DLPACK 260 Servo Capacity: Up to 105 bags/min Dosing range: 5g – 5000g (via separate dosing) Bag format: 60–260 × 80–500 mm Kodpfx Anex Ag Iksxonb Construction: Stainless steel Control system: Siemens Warranty: 12 months Delivery time: 10 weeks Optional extras: Printer, labeler, weigher, screw dosing, and more – fully customizable for your application. Suitable for pillow bags and almost any product type. About DL Packaging DL Packaging specializes in modernizing and installing dosing systems, vertical form-fill-seal machines, cartoners, and end-of-line packers. Our “Second Life Packaging Solutions” are rebuilt to near-new standards and can be combined into fully automated lines – all from a single source. With over 30 years of experience, in-house dosing capabilities, comprehensive warranties, and tailored advice, our experts design the perfect machine or packaging line for your needs. Remote support, maintenance contracts, and a warehouse stocked with over 20,000 parts ensure your production keeps running smoothly. DL Packaging – your worldwide partner in retrofitted packaging solutions, based in Oosterhout and proud retrofit partner of the Rovema Group.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: QP-25-AF, type of input current: three-phase, input voltage: 400 V, Qualipack QP-25-AF The fully automatic filling cycle begins by completely closing the bag valve and also registering the bag's weight. The next phase fills the bag, which is located on a load cell, with a rapid feed via a pneumatically operated slide gate and a screw conveyor. When the weight reaches a pre-set amount (typically around 95% of the required total), the slide gate closes to a slower feed rate until the required weight is reached, after which it closes completely. Once the screw conveyor has transferred all the product, it stops, and the valve seal is automatically released, ready for the bag to be removed. - Conveyor belts for filled bags - Sealers for filled bags Kodozgtv Aspfx Anxjnb - Weighing capacity: 5-50 kg - Accuracy: Within 25g - Filling rate: Up to 4 tons per hour - Filling method: 2-stage via a screw conveyor - Valve grip: Pneumatic (fully closed) - Bag support: Height-adjustable gravity rollers - Product feed: Controlled by a pneumatic gate

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Mould No 1. Diameter 185 mm No 2. 90 mm. Year of construction 2013. Knjdjydplcspfx Anxeb

Condition: good (used), Year of construction: 2020, functionality: unexamined, type of input current: three-phase, total width: 970 mm, total length: 2,530 mm, total height: 2,190 mm, overall weight: 850 kg, compressed air connection: 12 bar, Designed for bulk products and powders, it features a dosing head for bulk materials. It has a screw-type filling conveyor. It doses into doypack packaging with dimensions of 190 mm x 230 mm. The equipment was purchased but never put into operation; the project was discontinued. Kodpfxsy U Twrs Anxenb

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Knedpfevtcqgox Anxeb

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The machine is being sold on behalf of the owner. The current owner will perform one more maintenance service for the new buyer. Ksdpfszvd A Sex Anxsnb The machine has been used very little and has so far only packaged 6,547 units. It is ideally suited for packaging various loose food products, such as: Coffee Spices Rice Tea and much more. Since the machine is no longer needed, it is now for sale. An inspection and functional test can be arranged at any time. Condition: technically perfect, only slightly dusty. Location: 04668 Großbardau If you have any questions or are interested, please contact us by phone: Tel.: 0152 / 31381635

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Manufacturer - Canellitech Srl Model - 8-1 (8 x filling heads). Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Knsdpfx Aeulpu Senxsb Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Condition: good (used), Toyo Jidoki pouch packing machine with vacuum option. Has come from major UK food factory but not used for at least five years. Knodpfx Ajuf A Idonxob

Condition: ready for operation (used), Year of construction: 2013, Fritsch Easyline make up pastry line Knjdpfxozv R Eme Anxeb year of build 2013 table length overall 573cm. conveyor belt width 65cm guillotine filling depositor cutting knives etc. pictures BEFORE cleaning

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 2,000 mm, total height: 2,100 mm, total width: 1,300 mm, input voltage: 240 V, overall weight: 350 kg, pipe diameter (max.): 20 mm, product height (max.): 200 mm, product length (max.): 160 mm, product length (min.): 200 mm, Liquid filling machine for pouch bags, including a sealing unit. The machine produces four-sided pouches from flat film using welding. It is suitable for filling sauces, creams, salad dressings, and other liquids in the food, cosmetics, and non-food industries. Made in Hungary. Easy to adjust for various sizes, from 10 to 70 grams. Easy to clean and a reliable machine. Optionally, a 300-liter, 15 kW homogenizer can be connected. Knsdpozv E A Tofx Anxob

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 308, total length: 1,610 mm, total width: 890 mm, total height: 1,318 mm, overall weight: 350 kg, type of input current: three-phase, input voltage: 400 V, warranty duration: 6 months, year of last overhaul: 2026, product length (max.): 500 mm, product length (min.): 1 mm, pallet spaces: 1 euro pallets, Equipment: type plate available, Used Rheon KN-135 encrusting machine The Cornucopia KN-135 machine is an ideal tool for use in food production, ranging from the ready-to-eat food segment to the production of confectionery and bakery products. Technical data: Product weight range: 10-250 g, Capacity: standard version max. 280 kg/h; aluminum version max. 180 kg/h, Output: 20-100 pieces/min., Product length: 0-500 mm, Outer mass to filling ratio: 1:0 - 0:1, Forming: spherical, bar, and strip, Hopper capacity: 2 x 15 l, Belt speed: 2 – 35 m/min., Power: 1.3 kW. Device features: The device is made of stainless steel and other components approved for contact with food, Large and easy-to-use control system, An intuitive programming system ensures easy and user-friendly operation, Electronic memory function for storing 100 recipes, Built-in Product Memory Unit (P.M.U.) stores and retrieves production parameters for up to 100 recipes, Durable and hygienic hoppers, The innovative design of the device prevents the drive section from touching the dough. Knodpjzn H Diefx Anxjb

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, warranty duration: 12 months, total height: 1,700 mm, total width: 1,100 mm, total length: 1,900 mm, overall weight: 420 kg, power of the servo motor: 400 W, film width: 380 mm, number of blades: 1, input voltage: 220 V, product height (min.): 5 mm, product height (max.): 70 mm, product width (max.): 150 mm, product length (min.): 20 mm, product width (min.): 20 mm, product length (max.): 350 mm, year of last overhaul: 2026, input current: 10 A, Equipment: documentation/manual, Wrapping machine with a maximum wrapping width of 380 mm. 3 brushless axes - 7" touchscreen In like-new condition. Knodpszz Ndxjfx Anxjb

Condition: good (used), Very high spec bagging machine. Large choice of forming sets including block bottom. Kjdoywpblepfx Anxjnb

Condition: used, Year of construction: 2005, functionality: fully functional, AXOMATIC OPTIMA 700 Semi-Automatic Tube Filling & Sealing Machine Compact and high-quality tube filling and sealing machine from AXOMATIC, Italy. The machine was previously used for filling and sealing plastic tubes and is equipped with a hot-air sealing system, volumetric piston dosing system, heated product hopper, and agitator. Manufacturer: AXOMATIC S.r.l., Italy Model: OPTIMA 700 Serial No.: 14027E 2005 Year: 2005 CE marked MAIN EQUIPMENT - Semi-automatic tube filling and sealing machine - Rotary indexing table with 7 tube stations / holders - Manual tube loading - Volumetric piston dosing system - Stainless steel filling nozzle - Hot-air system for tube sealing - Temperature control for hot air - Heated stainless steel product hopper - Separate temperature control for hopper heating - Product agitator - Automatic / continuous dosing modes - Automatic tube discharge - Stainless steel machine construction - Transparent safety guarding - Emergency stop and safety controls - Various format and spare parts available - Documentation available ELECTRICAL / UTILITY DATA Voltage: 400 V Frequency: 50 Hz Installed power: 8.5 kW Max. compressed air pressure: 6 bar Approximate air consumption: approx. 150 l/min Max. water pressure: 3 bar Approximate water consumption: approx. 2–3 l/min Noise level: < 75 dB Net weight: approx. 300 kg APPLICATION Suitable for filling and sealing plastic tubes. The machine is particularly well-suited for creams, gels, ointments, pastes, and other liquid to viscous products, depending on the product and the installed dosing configuration. CONDITION Used machine in good and complete visual condition. The machine is currently in storage and has not yet been function-tested by us. We are planning to prepare and set up the machine for a functional test and demonstration. Once completed, a functional test and machine video can be provided. The machine can be inspected by appointment. Several machine-specific format and spare parts are included / available. The exact scope will be documented before delivery. IMPORTANT Exact tube dimensions, dosing range, and production capacity depend on the installed format and dosing components and are currently being verified. Further technical information, detailed photographs, and documentation are available upon request. Price: EUR 22,500 net negotiable, EXW Switzerland Knodpfxozyu R Uo Anxeb

Condition: ready for operation (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm - Washed sand 0-4mm Kedpfevw Urwox Anxjnb - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Kjdezzbcyepfx Anxonb Vacuum pump Tools