Used Printing Machine / Heat Press for sale (77,297)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES Cgjdpfsk S Dt Tjx Aa Heu 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t Cgjdpfjx Ap Itsx Aa Heu - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment Cjdpetwv S Nofx Aa Hjgu - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: used, Year of construction: 1980, operating hours: 1,879,946 h, functionality: fully functional, color channels: 2, input voltage: 380 V, Equipment: documentation/manual, Currently, we print almost everything, making the printing press redundant. Cgedpfx Aasy Tk Tzo Hsu

Condition: refurbished (used), Year of construction: 2014, Vutek GS 5000 R, fully refurbished (always maintained under Vutek’s full-service program) Color: 8C + White Resolution: 12 pl / 1000 dpi Speed: up to 275 m²/h Cjdpfxsy U Hmae Aa Hegu Includes: MESH/Textile Kit Trial roll: 1.6 m EFI Fiery server 3-month warranty

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: GTX-423, number of ink cartridges: 6, color channels: CMYK+2x WHITE, year of last overhaul: 2026, Complete professional DTG production line — Brother GTX Pro + Schulze Pretreatmaker IV + Tesoma Mini Conveyor Dryer + Drucktech Double Transfer Press Due to a change in business operations, we are offering our complete DTG production line for sale. All machines are in very good to as-new condition and have received professional maintenance weekly since commissioning. A comprehensive PDF with photos, serial numbers, and specifications is available upon request. Brother GTX Pro DTG Printer S/N: K0937196 — Firmware 1.32.0002 Print count: 33,675 Printheads in excellent condition, nozzle check 100/100 for both color and white (as of 30/11/2025) New fan filters, new wiper cleaners (color and white) Ink cartridge stock included: 2x Yellow, 1x Magenta, 2x Cyan, 2x Black, 1x White + 2x White already installed in the printer (all new) Complete platen set: Oversize Platen, Adult Platen, Youth Platen, Mini Platen, Sleeve Platen, and Cap Platen Schulze Pretreatmaker IV As-new condition Equipped with new spray nozzles, delivers perfect spray performance Tesoma Mini Conveyor Dryer As-new condition, Made in Germany Drucktech Double Transfer Press + air compressor Codpfxey Swi Tj Aa Hogu As-new condition All machines available as a bundle or individually. Sale as a complete set is preferred. Collection in Rotterdam (NL); shipping across Europe negotiable. On-site demonstration possible. Asking price for complete set: €16,500 excl. VAT (individual prices on request) Interested or have questions? Reply via this platform or send a message to receive the full PDF with additional photos and specifications.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used large format printing system/plotter ‘Mimaki TxF150-75’. Item for sale: 1 x Mimaki TxF150-75 with the following equipment: incl. Schulze Powder Machine 600 Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Cgedpfxsylud Ts Aa Hsu Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, This listing is for a second-hand DTG/DTF printer, the ‘Brother GTX 423Pro’ Items included: 1 x Brother GTX 423Pro with the following accessories: Includes Lotus Heat Press LTS 150B Slide Includes Schulze PreTreat maker 5 Meter readings: Total: Approx. 5,500 prints Cgodey R Nmhjpfx Aa Heu Condition: This listing is for a second-hand device, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: like new (used), functionality: fully functional, This offer is for a Canon imagePRESS C750 colour production system in mint condition Items for sale: 1 x Canon imagePRESS C750 with the following specifications: Includes Fiery Server Includes W1 Pro Staple Finisher Includes Paperdeck Lite XL-A1 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 683 pages Colour: Approx. 562 pages Black: Approx. 121 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Cjdpfey R Nmbox Aa Hogu

Condition: used, This offer is for a used ‘Canon imagePRESS C910’ colour production system Items for sale: 1 x Canon imagePRESS C910 with the following specifications: incl. Fiery Server H350 incl. Booklet Finisher W1 Pro incl. Folding Unit J1 incl. Document Insertion Unit N1 incl. Paperdeck Lite B1 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 740,607 pages Colour: Approx. 475,119 pages Black: Approx. 265,488 pages Cgsdpfx Aaey R Nlws Hju Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used ‘Canon imagePRESS V1000’ colour production system Items for sale: 1 x Canon imagePRESS V1000 with the following specifications: Includes Fiery Server D3000 Includes Booklet Finisher AF1 Includes paper deck Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Cgsdoy R Ncpjpfx Aa Hsu Meter readings: Total: Approx. 1,358,828 pages Colour: Approx. 1,141,255 pages Black: Approx. 217,573 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, This listing is for a used ‘Konica Minolta AccurioPress C7090’ colour production system Item for sale: 1 x Konica Minolta AccurioPress C7090 with the following equipment: incl. OT-512 incl. RU-518m incl. Stacker LS-507 incl. Intelligent Quality Car Unit IQ-501 Cgedpfoy R Nbxex Aa Heu incl. Paper Deck PF-712 incl. Paper Deck PF-812 Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 926,200 pages Colour: Approx. 709,302 pages Black: Approx. 216,898 pages Condition: This is a second-hand machine, which may show signs of use (minor scratches or yellowing). The machine has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation Csdpfx Aju U Ey Ija Hegu - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Year of construction: 2011, condition: ready for operation (used), Drive: TOX power package S 04.00.300.44D, pneumatic connection: G 3/8 inch, compressed air preparation: filtered and dried compressed air, max. particle size: 40µm, control: STE 336-306-1/2, max. press force at 10bar air pressure: 40kN, air pressure: 3 to 10bar, total stroke: 300mm, force stroke: 40mm, ambient temperature: 10 to 60°C, length: 1753mm, width: 1100mm, weight of the yoke: approx. 1290kg, with documentation. The machine has been shut down for years, but is in good condition, an inspection on site is possible. Cgsdpfx Aajzbb Scj Hju

Condition: excellent (used), Year of construction: 1998, Semi-automatic, angle-opening screen printing machine THIEME 510. Printing format 55 x 75 cm, electro-pneumatic machine with a height-adjustable vacuum table (up to 40 mm printing stock height), table format 80 x 95 cm, vacuum area 58 x 76 cm, max. screen frame format 100 x 110 cm, with squeegee control, electronically adjustable squeegee and flood bar speed, steplessly adjustable squeegee stroke. Easy screen insertion from the front, pneumatic screen frame clamping, multi-pass printing, registration pins, equipped with 3 sets of printing and flood bars. Requires 400V and compressed air at 6 bar, used, year of manufacture: 1998, very good condition. Cedpfx Aasy Ugqle Hegu

Condition: used, Year of construction: 1993, Number of drilling spindles: 8 pcs Codpjza Hlfjfx Aa Hjgu Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Drilling direction: from above, fixed Number of material clamps: 2 pcs Type of material clamping: pneumatic Design: stationary Location:

Condition: good (used), Year of construction: 1998, operating hours: 385 h, functionality: fully functional, color channels: 8 color, paper weight (min.): 40 g/m², paper weight (max.): 400 g/m², paper width (min.): 280 mm, paper width (max.): 720 mm, paper height (min.): 400 mm, paper height (max.): 1,020 mm, total length: 720 mm, total width: 11,500 mm, total height: 3,200 mm, space requirement length: 13,500 mm, space requirement width: 2,500 mm, space requirement height: 2,500 mm, counter reading (black): 385, counter reading (color): 385, year of last overhaul: 1998, type of input current: three-phase, input current: 200 A, input voltage: 400 V, Equipment: documentation/manual, HEIDELBERG SPEEDMASTER SM 102-8-P OFFSET PRINTING PRESS 8 Colors + Perfecting 4+4 | CPC 1-04 | Autoplate | In Production Year: 1998 Impression Count: 359 Million Availability: Immediate HIGH PERFORMANCE HEIDELBERG SPEEDMASTER 102-8-P AVAILABLE FOR IMMEDIATE SALE This well-maintained Heidelberg Speedmaster SM 102-8-P is currently visible in production and operating in Good condition. Equipped with advanced Heidelberg automation systems, this machine delivers high productivity, stable register accuracy, and premium print quality for commercial printing operations. The machine with complete NEW ink rollers and dampening rollers for all 8 printing units. Ideal for: • Commercial printing • Packaging printing • Magazine production • High-volume offset printing • Brochures, catalogs & advertising materials • International print production facilities TECHNICAL CONFIGURATION: • CP Tronic Control System • CPC 1-04 Ink Control • Alcolor Dampening System • Autoplate Semi-Automatic Plate Changing • Auto Blanket Wash • Autoregister • Electronic Double Sheet Control • Electronic Side Lay Control • High Pile Delivery • Sheet De-curler • Antistatic System • Steel Plate in Feeder & Delivery • Super Blue Package • Technotrans Refrigeration & Re-circulation • Weko Powder Spray MACHINE CONDITION: • Machine visible in production • Good mechanical condition • Full new ink rollers will be installed • Full new dampening rollers installed Cgsdpjy Sg Dmefx Aa Hju • Clean and professionally maintained dismantling, loading, and shipping assistance can be arranged. Contact us today for: Additional photos & videos Heidelberg SM 102, Heidelberg Speedmaster, 8 color 4+4 offset press, perfecting printing press, used Heidelberg printing machine, commercial printing press, Heidelberg CPC 1-04, offset printing machine , Heidelberg Autoplate, Heidelberg SM102-8P, industrial printing equipment, used offset press for sale, Heidelberg printing machinery, sheetfed offset press, Heidelberg printing machine

Condition: used, Epson's first linehead, inkjet label press with LED UV curing ink, the L-6034VW/L-6034V enables high-speed printing that's ideal for short-to mid-run jobs, producing labels with outstanding scratch and weather resistance.  Digital Label Press Epson SurePress L-6034 Baujahr / Year 2016 - Serial-No. TE90010012 Bildgröße / Image Size max. 330 x 1000mm Cjdpfsy Uwakox Aa Hsgu Bahnbreite / Web Width 80 - 340mm Substrate Support PP, PE and PET, coated paper, cast coated paper, and uncoated paper Substrate Thickness 3.14 - 12.60 mils (80 to 320 microns) Printing Technology PrecisionCore linehead inkjet technology Quick-drying UV ink Epson UV Ink / LED-UV-härtender Tinte White Ink Circulation System Automated control and in-line inkjet nozzle testing CMYK, White, and Multi-varnish inks installed in-line Maximum Print Resolution 600 x 600 dpi Print Speed Up to 49.21 ft/min (15m/min), Up to 24.61 ft/min (7.5m/min)  Ink Type LED UV Curing Inks Ink Configuration Black, Cyan, Magenta, Yellow, Multi-Varnish, White Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 2004, Heidelberg SM 74-10-P-H Perefcting: 5/5-10/0 Max size: 53 x 74 cm Age: 2004 Location: Europe Cgedpovv Nrcjfx Aa Heu •⁠ ⁠CP 2000 •⁠ ⁠Autoplate •⁠ ⁠CP Tronic •⁠ ⁠Alcolor Vario •⁠ ⁠Color Asisstant •⁠ ⁠Ink Temperature Control •⁠ ⁠Blanket and Impression Cylinder Wash Up Device •⁠ ⁠Water cooled •⁠ ⁠In Production

Condition: excellent (used), functionality: fully functional, number of ink cartridges: 4, color channels: 4, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 350 g/m², paper width (min.): 100 mm, paper width (max.): 330 mm, paper height (min.): 148 mm, paper height (max.): 1,300 mm, number of feeding trays: 5, type of input current: three-phase, Equipment: auto duplex, brochure finisher, documentation/manual, Canon imagePRESS C170 Professional Color Production Printer + Brochure Finisher For sale: Canon imagePRESS C170 professional color production printer in excellent condition. This machine is virtually new. The printer is equipped with a Brochure Finisher AC1, which enables the automatic production of stapled brochures and booklets. Ideal for printing companies, copy shops, marketing agencies, and businesses requiring high-quality prints. Key features: • Professional production printer with very high print quality • Automatic brochure and booklet finishing • Suitable for high print volumes • Reliable Canon imagePRESS technology • Includes OCR scanning function • Low print count for a production machine Cgodpfx Aajy Tvqfe Hou This machine is known for its excellent color quality, speed, and reliability. Print count: 67,000 If interested, the machine can be viewed and tested by appointment. Price: €6,900 excluding VAT The machine is available immediately. +32483651393

Condition: good (used), Year of construction: 2003, functionality: fully functional, color channels: 4, Plus Version: prepared for numbering & perforating unit Perfecting 2:2 Classic Center Powder sprayer Electronic double sheet detector New rollers VARN Kompac III The Heidelberg GTO 52-4-P3 is a professional four-color small-format offset printing press, renowned for its reliability and precision in commercial job printing. This model features an integrated perfecting system, allowing for double-sided printing of sheets in a single pass. Key Technical Specifications Max. sheet size: 360 x 520 mm (B3 format) Min. sheet size: 105 x 180 mm (one side) / 140 x 180 mm (both sides) Printing speed: Up to 8,000 sheets per hour Substrate thickness: 0.03 mm to 0.4 mm Colors: 4 printing units Cjdpfxoy Efqle Aa Hegu Plus Version: This machine is designed as a "Plus Version," which includes preparation for additional numbering and perforating units (N+P). Control: Equipped with the Classic Center for central control of ink supply and register.

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Cedpfx Aowbvmisa Hogu Very good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 Cgedpshmmfksfx Aa Heu - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder Csdpji Db Ibsfx Aa Hjgu - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Cgjdpfx Aorzfh Hoa Heu Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition