Used Rösler Deburring Machine for sale (64,388)

Condition: new, Timesavers Series 12 WW The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. Bodpewqf U Uofx Apvjdd The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm.

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Bdsdpfx Aey Ugd Ejpvjd

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Bdjdpfxotr Avis Apvsd Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: good (used), Year of construction: 2017, functionality: fully functional, working width: 225 mm, Used deburring machine with a sanding belt and cup brush for deburring. The conveyor belt has been replaced. The machine can be inspected while powered on. Available immediately. Bdedozbhd Sjpfx Apvjd

Condition: used, Technical details: Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m Bdodswiu Smopfx Apvsd BRUSH MACHINE *

Condition: used, Year of construction: 2008, operating hours: 1,019 h, functionality: fully functional, machine/vehicle number: 93.437.268, working width: 1,350 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 7,085 mm, total width: 2,020 mm, total height: 2,295 mm, overall weight: 4,800 kg, working height: 850 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, power: 55 kW (74.78 HP), table height: 850 mm, grinding width: 1,350 mm, input current: 100 A, Equipment: documentation/manual, For sale is a reliable Weber NLC 1350 wet grinding machine from 2008. This machine is specifically designed for high-quality surface finishing of laser-cut, punched, and nibble parts. Thanks to wet grinding technology, excessive material heating is prevented, ensuring consistent results with high precision. Highlights & Features: Precision: Consistent working height and robust modular construction. Versatility: Suitable for deburring, edge rounding, and descaling of both thin and thick sheet metal. Safety: Wet grinding binds grinding dust and increases safety in the production process. Control System: Intuitive user interface for rapid changeover. If you have any questions or need further information, please feel free to send us a message or give us a call. Bdsdpey Ar A Nefx Apvjd

Condition: excellent (used), functionality: fully functional, Rainer bevelling machine, model 250/6, with fixed angle, max thickness 6 mm, used machine, internal code: SVR 401 Bdjdpfx Apoyv Hyisved

Condition: good (used), Year of construction: 1996, Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: Bdjdpfx Aeyw Siropved -Dimensions: 440/945/H1185 mm -Weight: 277 kg

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush Bodpfsrw Daaex Apvsdd -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Connected load: 2.4 / 3.7 kW Required space: approx. 1.0 x 0.5 x 1.2 m (L x W x H) Transportation and loading can be organized Europe-wide on request and for an additional charge. Bedpfx Ajy H Ifhjpvjdd Prices are subject to VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell your equipment? For further information or contact options, you can reach us via the contact form.

Condition: used, Year of construction: 2023, gebraucht 2023 5542 prompt, Zwischenverkauf v Italien 11600 € 1 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW Bedpfx Ajwiryhepvodd 1400 mm 1000 mm 1450 mm 300 kg Demo machine / mint condition Net price (price for new machine € 13.600,00) Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr. BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 40-200 mm total power requirement: 31,3 kW weight of the machine ca.: 4 t Bedpfx Ajxc E Icepvodd dimensions of the machine ca.: 1,8 x 2,2 x 1,8 m

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 300 mm gear width: 100 mm max. module: 5 workpiece turning speeds: min work piece - max.: 1100 mm workpiece clamping: auto. tension device Bdedpfx Apoyzh Raovod number of spindle speeds: 1/min. spindle bearing diameter: 100 mm diameter of spindle flange: 120 mm tailstock travel: 80 mm weight of the machine ca.: 3500 KG dimensions: 1200 x 1450 x 2250 mm total power requirement: 10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility. *

Condition: good (used), Year of construction: 1995, Model: Rotomat 180 Bdedpfx Apow Uabijvod Manufacturer: Egon Wutzke, Zell a. A., Germany Machine type: Bürst-Entgratemaschine (deburring and brushing machine) Article number: 609 101-04 Serial number: 1071 Year of manufacture: 1995 Key components: - Main switch (Hauptschalter) – red knob 0/1 - Fault indicator (Störung) – error warning light - Power indicator (Spannung) – voltage control lamp Brush spindle speeds: - I: 800 rpm - II: 1,600 rpm Working width: approx. 180 mm (hence the “180” model designation) Type of process: Brush deburring (for metal, aluminium, steel, plastics) Power supply: 400 V / 50 Hz (three-phase) Motor power: approx. 2.2 – 3.0 kW (depending on version) Speed settings: 2-stage (800 and 1,600 rpm) Dust extraction connection: Yes (extraction nozzle visible at rear) Safety features: Emergency stop, mechanical interlocks, fault signalling 🔹 Typical applications - Removal of sharp edges after laser cutting, stamping, or milling - Processing of small and medium metal parts - Surface preparation prior to painting, galvanising, or welding For sale: EWU Rotomat 180 Deburring Machine Offering for sale a brush deburring machine EWU Entgrattechnik Rotomat 180, year of manufacture 1995, made by Egon Wutzke (Germany). The machine is fully functional, used, newly serviced, and ready for operation. Technical data: • Model: Rotomat 180 • Manufacturer: Egon Wutzke / EWU Entgrattechnik • Year of manufacture: 1995 • Serial number: 1071 • Motor power: approx. 2.2 kW • Power supply: 400 V / 50 Hz (three-phase) • Spindle speeds: 800 / 1,600 rpm (2 ranges) • Maximum part size: Ø 180 mm / square up to 127 mm • Dimensions: approx. 950 × 1125 × 1270 mm • Weight: approx. 350 kg • Hour counter: [enter actual reading – shown in photo: 4451 h] • Equipment: dust extraction nozzle included Applications: • Deburring and edge rounding of pipes, profiles, steel and aluminium parts • Edge processing after cutting, stamping or milling • Surface preparation prior to painting, galvanising, or welding Condition: • The machine is in good technical condition • Fully functional electrical systems and controls • Ready for work, on-site inspection possible

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, The device comes with a new belt, a spare belt, and additional brushes. It includes a complete set of BOECK brushes with sandpaper, as well as extra wire brushes for removing oxides, as shown in the photo. The set also features a complete extraction system with industrial filters (filter ventilation unit) from Keller. Bsdpfx Ajx Ht Rvepvjdd

Condition: used, Year of construction: 2015, Technical details: Bsdpfx Ael Ha Ubjpvedd weight of the machine ca.: 4 t

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or Bdjdpfx Apex H Tvfsved integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Bdodpfx Apex Uwlasvod Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: excellent (used), Year of construction: 2026, Timesavers Series 10 Manual Grinder This machine is a demonstration model that has been used occasionally for demonstrations. It features simple operation and comfortable handling. It has a non-slip rubber mat and an additional vacuum field for small parts. The speed is continuously adjustable. The machine is in our warehouse and can be inspected, tested, and accepted at any time while powered on. Bdodpfx Apsfhb N Ssvsd

Condition: ready for operation (used), continuously adjustable facet angle from 30 to 45 to 60° Facet width for workpiece thicknesses of 2.5 mm: 0 - 10 mm Tool diameter: 170 mm Speed: 2800 rpm Bsdpfxsuriv Aj Apvodd Drive motor: 380 V, 550 W Space required: 500 x 390 x 370 mm

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 12 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. Rolling bruh rotation speed: 8-26 m / s Rolling brush public speed: 1-15 rpm machine thickness servo adjustment precision: 0,01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Electrical connected load: 49,5 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elements Bsdpfx Apoygx A Nsvodd Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Extended machine accessories Optional feeding mode:1. Feeding with strong permanent magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm)2. Feeding with vacuum negative pressure adsorption transport (suitable for stainless steel plates, copper plates, aluminum plates, etc.) that cannot be magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: ⚙️ Core Specifications Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system Bdsdpfsxx Nq Tex Apved 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Modular Design: Configurable for different layouts and productivity goals. Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Condition: used, max. wheel diameter 300 mm gear width 200 mm max. module 12 Bsdpfx Asxu Nttopvedd min. module 0,5 total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 0,8 x 1,2 x 1,5 m

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm turning speed range 0 - 2830 U/min work height max. 945 mm milling-head swivable +/- 180° engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° Bdjdpfx Aexab Hpspvsd - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57900 € 1094.31 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Bjdpfx Aewiqukepvsdd Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl.